 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wqqDj-000BkTC; Tue, 22 Jul 97 20:28 CDT |
| Content-Type: |
text/plain; charset=ISO-8859-1 |
| Old-Return-Path: |
|
| Date: |
Tue, 22 Jul 1997 18:26:07 -0700 |
| Precedence: |
list |
| From [log in to unmask] Thu Jul 24 18: |
22:15 1997 |
| Resent-Sender: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| >From willli Tue Jul 22 20: |
28:31 1997 |
| X-MSMail-Priority: |
Normal |
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Resent-From: |
|
| Content-Transfer-Encoding: |
7bit |
| Resent-Message-ID: |
<"hUYhe.0.7b8.QuLrp"@ipc> |
| Subject: |
|
| From: |
|
| TO: |
|
| X-Priority: |
3 |
| X-Mailer: |
Microsoft Internet Mail 4.70.1155 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Ah yes, but the more resistance the foil sheet is also. Grain boundaries
are
now many. Also, the peel strength adhesion is less. Some suppliers enhance
that surface with silane coupling agents which works very strange with fine
lines.
Groovy
----------
> From: [log in to unmask]
> To: [log in to unmask]
> Subject: Cu Foil Grain size
> Date: Tuesday, July 22, 1997 12:34 AM
>
>
> Hi,
>
> Does anyone know how would the grain size of the matt surface of the Cu
> foil (say 1/2 oz)
> affect the etching performance, peel strength and any other properties of
> the PCB?
>
> The reason is we have a Cu foil supplied from Japan with very fine grain
> nodules < 1um.
> Then another from Korea with larger grain at the matte surface (1 - 2um)
> under the SEM.
>
> Smooth side for this Korean foil is also rougher.
>
> I read one article from the Japan supplier that the smaller the grain the
> faster the etching rate, thus easier and better etching especially for
> fine-lines.
> Any Comment?
>
> Richard
>
>
>
***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05
*
>
***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
> * with <subject: subscribe/unsubscribe> and no text in the body.
*
>
***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact
*
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
>
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
