 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Thu, 06 Feb 1997 07:38:00 -0800 |
| Precedence: |
list |
| Resent-From: |
|
| Message-ID: |
|
| Content-Transfer-Encoding: |
7Bit |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Content-Disposition: |
inline |
| From [log in to unmask] Mon Feb 10 12: |
43:36 1997 |
| Resent-Message-ID: |
<"Lk_F6.0.Dk8.ryh-o"@ipc> |
| Subject: |
|
| From: |
|
| X-Status: |
|
| X-Loop: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vsiyd-0000emC; Thu, 6 Feb 97 23:35 CST |
| Resent-Sender: |
|
| Parts/Attachments: |
|
|
Subject: ASSY: Re: Flexible Circuit Repair
--------------------------------------------------------------------------------
Common polyimide flex materials are rated for soldering at 550F or 500F max.,
depending on the type of adhesive.
Andy Magee - Applications Engineer
Rogers - Circuit Materials
Tel: (602) 917-5237
Fax: (602) 917-5256
E-Mail: [log in to unmask]
Website: http//www.rogers-corp.com/cmu
////////////////////////////
// SERVICE TO THE LINE, //
// ON THE LINE, //
// ON TIME. //
////////////////////////////
______________________________ Reply Separator
_________________________________
Subject: Flexible Circuit Repair
Author: Tracey Spencer::(SPNCRTAA) at ~FABRIK
Date: 2/4/97 11:52 AM
From: Tracey Spencer
Date: Tue, Feb 4, 1997 11:52 AM
Subject: Flexible Circuit Repair
To: Andrew P Magee; TechNet
What is the maximum allowable tip temp for soldering/de-soldering of
components, both through hole and surface mount, to flexible circuits?
---------------------------- Forwarded with Changes ---------------------------
From: /S=cc:Mail-Gateway/OU2=XSFCC/OU=ZWGBA/P=MOT/A=MOT/C=US/::(SCCMLGAB) at
~FABRIK
Date: 2/5/97 6:58PM -0800
To: Andrew P Magee at Rogers-MCD
Subject: Message Undeliverable to cc:Mail
-------------------------------------------------------------------------------
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
