TECHNET Archives

April 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wGsD5-000BiqC; Mon, 14 Apr 97 15:18 CDT
Old-Return-Path:
<[log in to unmask]>
Date:
14 Apr 97 16:27:10 EDT
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/11938
From [log in to unmask] Mon Apr 14 16:
04:31 1997
TO:
"INTERNET:[log in to unmask]" <[log in to unmask]>
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"2gyMB1.0.wZD.Y4fKp"@ipc>
Subject:
SMT surrounded by bonded heat sinks
From:
"P. ROY" <[log in to unmask]>
Message-ID:
<[log in to unmask]>
X-Loop:
[log in to unmask]
Parts/Attachments:
text/plain (20 lines) 
All
	My customer is designing a board with a bonded aluminum heatsink of .062
aluminum on the component side. ie as if it were a copper pour zone on the
board. Has anybody any experience with SMT reflow on a board like this?

Peter Roy
Toronto

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2