Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 11 Jun 2001 11:42:08 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Netters,
Sorry First attempt I left off subject (Starting out one of those Days!!)
Does anyone know of company that can do ICT and Burn-In Testing within same
facility?
Here is my situation:
We need an Outside source to do initial testing of 45 pcs of an assembly.
Test Requirements:
1. Genrad 2286 Test Platform, All digital pins are high speed, relay driver
board, SVS power supply, AFTM board, and IEEE Fluke model 1953A
Counter/Timer.
We should be able to supply the Test Fixture Head and Test Programs.
2. Node count is about 1500-1600.
3. Perform Genrad ICT testing before and after burn-in. (2) test required.
Burn-In Requirements:
1. Total Duration of 96 hours.
2. 8 hour cycles consisting of 4 hours @60C, then 4 hours @10C, with 30
minute transition between extremes.
3. Power cycling of Assembly shall be performed during Burn-In with 27
minutes "ON" and 3 minutes "OFF".
Extra:
1. Would like for company performing test to provide Diagnostic's and Repair
of "ICT" Failure of initial units.
2. We will provide parts to facilitate repairs.
Tom Braswell
Ph: (252) 977-8745
Fx: (252) 977-3477
Email: [log in to unmask]
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|