Hello Netters, Sorry First attempt I left off subject (Starting out one of those Days!!) Does anyone know of company that can do ICT and Burn-In Testing within same facility? Here is my situation: We need an Outside source to do initial testing of 45 pcs of an assembly. Test Requirements: 1. Genrad 2286 Test Platform, All digital pins are high speed, relay driver board, SVS power supply, AFTM board, and IEEE Fluke model 1953A Counter/Timer. We should be able to supply the Test Fixture Head and Test Programs. 2. Node count is about 1500-1600. 3. Perform Genrad ICT testing before and after burn-in. (2) test required. Burn-In Requirements: 1. Total Duration of 96 hours. 2. 8 hour cycles consisting of 4 hours @60C, then 4 hours @10C, with 30 minute transition between extremes. 3. Power cycling of Assembly shall be performed during Burn-In with 27 minutes "ON" and 3 minutes "OFF". Extra: 1. Would like for company performing test to provide Diagnostic's and Repair of "ICT" Failure of initial units. 2. We will provide parts to facilitate repairs. Tom Braswell Ph: (252) 977-8745 Fx: (252) 977-3477 Email: [log in to unmask] --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------