Peter:
Try Hybrid, @1-800-387-9481.
Ask for John Hamilton.
Chris
-----Original Message-----
From: <Peter George Duncan> [SMTP:[log in to unmask]]
Sent: Thursday, August 23, 2001 1:56 AM
To: [log in to unmask]
Subject: Re: [TN] Stepped Stencil
[This e-mail is confidential and may also be privileged. If you are
not the
intended recipient, please delete it and notify us immediately; you
should
not copy or use it for any purpose, nor disclose its contents to any
other
person. Thank you.]
Hi, David,
Your existing stencil manufacturer ought to be able to do it for
you, or if
not, talk to any local CM's about who they use.
You want to step the bottom of the stencil - I take it you mean the
step
will contact the board not the paste squeegee? Be careful doing this
unless
you have a lot of real estate clearance on the board around the area
of the
step, as you won't get proper stencil contact with the board until
the step
"runs out". The board area between the edge of the step and the the
end of
the run-put will have "mutant" solder paste deposits - wrong
thickness, out
of shape, out of area, etc. The squeegee will also "form" the
stencil over
the step, deforming it quickly beyond use.
The step should always be on the squeegee side, so that a uniform
surface
is presented to the board. Then you will get controllable solder
paste
thicknesses (that word again) wherever you want them.
Regards
Pete Duncan
David Simmons
<dave.simmons@T To: [log in to unmask]
AIT.CO.NZ> cc: (bcc: DUNCAN
Peter/Asst Prin Engr/ST Aero/ST Group)
Sent by: Subject: [TN] Stepped
Stencil
TechNet
<[log in to unmask]
G>
08/23/01 08:53
AM
Please respond
to "TechNet
E-Mail Forum."
Hi,
We are considering the use of a stepped stencil.
The base thickness is 5 thou and we would like the step to be 8 thou
(3
thou thicker).
We would like the step to be on the bottom side of the stencil.
The total stencil size is 20 by 20 inch.
The size of the step would be about 50 * 50 mm.
Does anyone have any contacts of stencil manufacturers who can do
this
for us?
Thanks
David
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following
text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message:
SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources &
Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|