TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wpKVb-000BjsC; Fri, 18 Jul 97 16:24 CDT
Content-Type:
text/plain; charset=US-ASCII; X-MAPIextension=".TXT"
Old-Return-Path:
<[log in to unmask]>
Date:
Fri, 18 Jul 97 16:41:47 PDT
Precedence:
list
From [log in to unmask] Mon Jul 21 16:
03:53 1997
Message-ID:
<[log in to unmask]>
MIME-Version:
1.0
Status:
O
Priority:
Normal
TO:
[log in to unmask]
Return-Path:
<TechNet-request>
X-Status:
X-Loop:
[log in to unmask]
X-Mailing-List:
<[log in to unmask]> archive/latest/14125
Resent-Message-ID:
<"p8UcI3.0.jr6.zxzpp"@ipc>
Subject:
Dry Film Rework
From:
scott birnbaum <[log in to unmask]>
Resent-From:
[log in to unmask]
>From willli Fri Jul 18 16:
24:28 1997
Content-Transfer-Encoding:
7bit
Resent-Sender:
TechNet-request [log in to unmask]
Parts/Attachments:
text/plain (24 lines) 

We occasionally strip dry film resist off of panels that are printed 
improperly.  We use AlphaMetals PC4046 stripper and water rinse. 
We then send the panels through our Aluminum Oxide scrubber and 
normal dry film processes. The panels are for pattern plate. Is there a 
recommended rework procedure for these mis-printed panels? Is 
water rinse sufficient? The panels yield worse due to shorts than 
normally processed panels.  Any suggestions are appreciated. 

Thanks,

Scott Birnbaum

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2