TECHNET Archives

March 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Mon, 12 Mar 2001 07:57:55 +0100
Reply-To:
Subject:
From:
Jowan Iven <[log in to unmask]>
Content-Type:
text/plain; charset="iso-8859-1"
In-Reply-To:
Content-Transfer-Encoding:
7bit
MIME-Version:
1.0
Parts/Attachments:
text/plain (75 lines)
Hi Bob,

Are you sure that the covertape itself ain't sticky?
That's a common problem with the PSA (Cold Seal) process.
I myself prefer components taped in a Hot Seal process.


Best Regards,

Jowan Iven
Process Engineer Manufacturing

Stork Electronics B.V.


-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of bbarr
Sent: Friday, March 09, 2001 22:47
To: [log in to unmask]
Subject: [TN] Part Sticking to Top Tape?


I have two different part numbers of a surface mount resistor array that
feeds out of a 12mm tape. This is the problem with both: The back end of the
part wants to ride up with the tape at the tape peel back point. They look
like little soldiers laying on top of the tape. I say the back edge is
riding up because the parts are marking side up and I don't see the part
actually flipping. The part is .200 x .120 so we are not talking a real
small part here. Is this a static problem? Even when the part is in the
pocket just before the tape peel back point it seems like it is attracted to
the tape because the front edge of the part is raised up against the tape.
Anyone else experience this? To get the boards built I fabricated a little
piece of metal and taped it to the top of the feeder to keep the part in the
pocket. Not too elegant and I would really like to know what is going on
here. I even tried blowing air from an ionizer fan on the reel to see if I
could neutralize a charge, but that did not help.

Thanks.


Bob


Robert Barr
Manufacturing Engineering
Formation, Inc.
Voice: 856-234-5020 x3035
Fax: 856-234-6679
email: [log in to unmask]

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2