DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wUpI5-000BjAC; Fri, 23 May 97 03:01 CDT
Content-Type:
text/plain; charset=us-ascii
CC:
[log in to unmask]
Old-Return-Path:
<[log in to unmask]>
Date:
Fri, 23 May 1997 16:10:17 -0700
Precedence:
list
From [log in to unmask] Fri May 23 09:
01:04 1997
Message-ID:
<[log in to unmask]>
MIME-Version:
1.0
X-Mailing-List:
<[log in to unmask]> archive/latest/2470
>From dammth Fri May 23 03:
01:46 1997
TO:
DesignerCouncil <[log in to unmask]>
Return-Path:
<DesignerCouncil-request>
X-Loop:
[log in to unmask]
Resent-From:
[log in to unmask]
Resent-Message-ID:
<"WfpDt1.0.qXE.SxKXp"@ipc>
Subject:
300-pin connector
From:
[log in to unmask]
Content-Transfer-Encoding:
7bit
X-Mailer:
Mozilla 3.01 (WinNT; I)
Organization:
DSO
Resent-Sender:
DesignerCouncil-request [log in to unmask]
Parts/Attachments:
text/plain (20 lines) 
I was given a 300-pin SMD connector from CONNEI that has pin pitch of
0.635mm (0.025")and the pin width of 0.3mm (0.012"). If my board length
is limited to 186mm (7.3") x 140mm (5.5"), how can I get all the
connections up to the rest of the circuitry? Bearing in mind that the
board is heavily populated with LCCs on both sides.

I would appreciate yourhelp as soon as possible. Thanking you, guys out
there in advance! :(

***************************************************************************
*   The mail list is provided as a service by IPC using SmartList v3.05   *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact    *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2