I would like to know which standard that is, that you are referring to. Most
reels of components that I have seen, the polarity is on the left at zero
rotation. On a related topic, IC's in sticks have pin 1 to the upper left,
and IC's on reels have pin 1 lower left, everything I have seen is always on
the left, or have I lost my mind? (don't have any reels here)
Onward thru the fog, Jack
-----Original Message-----
From: Barry Olney [SMTP:[log in to unmask]]
Sent: Monday, September 21, 1998 5:55 PM
To: [log in to unmask]
Subject: Re: [DC] PCB Footprint standard for smt polarised
components?
Hi Paul,
According to the Jedec standard:
The component should be drawn parallel to the X axis
The polarisation marking and Pin 1 to the right.
Cheers,
Barry Olney
Paul Arklay wrote:
>
> Hi Everyone,
>
> When creating smt polarised component geometries on your cad
system for pcb
> design do you create them horizontally with the polarised side to
the right
> or the left? In other words is there a standard for this when
creating
> PCB footprints?
>
> Best Regards,
> Paul Arklay
>
> Jtec Pty Limited
> Unit 3
> 118-122 Bowden Street
> Meadowbank NSW 2114
> Sydney Australia
>
> Switch +61 2 98096933
> Fax +61 2 93640055
> Direct +61 2 93900622
>
> [log in to unmask]
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC
using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################
--
__________________________________________________________________
Barry Olney http://www.icd.com.au
Managing Director
In-Circuit Design Pty Ltd
VeriBest Solutions Centre
Level 1, Princess Tower PO Box 362, Robina Business Centre
1 Princess Street, Unit 34/24 Ron Penhaligon Way,
Kew, VIC 3101, Australia Robina, Qld 4226, Australia
Ph: +61 3 9205 9595 Ph: +61 7 5562 0075
Fax:+61 3 9205 9410 Fax: +61 7 5562 1175
Mbl:+61 4 1117 0827 Email: [log in to unmask]
__________________________________________________________________
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|