Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Fri, 18 Sep 1998 10:57:19 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Oops... just the opposite, JoAnn..... you need a certain amount of
copper to let all that current flow through, but you need to maintain a
certain amount of air to keep the voltage from jumping across to something
else.
For Internal conductors you need 0.0001 mils per volt
For external coated conductors 0.00012 mils per volt
For conductor to uncoated lead 0.00012 mils per volt
-----Original Message-----
From: JoAnn Amerson [SMTP:[log in to unmask]]
Sent: Friday, September 18, 1998 10:31 AM
To: [log in to unmask]
Subject: Re: [DC] FW: pcb design rules
On 18 Sep 98, Ken Brown wrote:
> LOOKING FOR DEESIGN RULES FOT PCB LAND SPACING VS VOLTAGE NEED TO
APPLY
> 2KV BETWEEN LANDS AND CONNECTOR PINS.
Hi Ken -
You are trying to compare apples and oranges. Voltage determines
the track
widths needed, current determines the spacing between traces, pins,
etc. At
least I'm fairly certain about this answer. I'm sure there will be
better answers
forthcoming. :-)
Jo
JoAnn L. Amerson
Design Librarian
Red Lion Controls, Inc.
E-mail: [log in to unmask]
Voice: (717) 767-6961 ext 6308
Thought for the day:
We should seize every opportunity to give encouragement.
Encouragement is oxygen to the soul.
-George M.Adams
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|