TECHNET Archives

March 2018

TechNet@IPC.ORG
Options: Hide Table of Contents

<> (7 Messages)
Ahmad, Syed (1 Message)
BEV CHRISTIAN (9 Messages)
Bhanu Sood (2 Messages)
Bob Wettermann (4 Messages)
Brian Ellis (2 Messages)
Caitlen Gahm (1 Message)
CANTAGALLO Luigi (1 Message)
Carl Van Wormer (2 Messages)
Carroll, Thomas A (2 Messages)
Chris Mahanna (1 Message)
Dave Schaefer (1 Message)
David Hillman (13 Messages)
Decker, Scott UTAS (6 Messages)
Douglas Pauls (8 Messages)
Drew meyer (2 Messages)
Dwight Mattix (5 Messages)
Frank Kimmey (1 Message)
FTL Quality (1 Message)
Gary Crowell (1 Message)
Graham Naisbitt (2 Messages)
Guy Ramsey (3 Messages)
Jack Olson (6 Messages)
Joe Russeau (2 Messages)
John Burke (4 Messages)
Jose A Rios (5 Messages)
Larry Dzaugis (3 Messages)
lduso - Diamond-MT.com (2 Messages)
Leland Woodall (1 Message)
Matthias Mansfeld (2 Messages)
Mumtaz Bora (1 Message)
Nigel Burtt (2 Messages)
Nutting, Phil (3 Messages)
Richard Kraszewski (1 Message)
Robert Kondner (1 Message)
Ron Feyereisen (1 Message)
SALA GABRIELE (4 Messages)
Stadem, Richard D (15 Messages)
Steve Gregory (4 Messages)
Tan Geok Ang (3 Messages)
Tempea, Ioan (4 Messages)
Tom Newton (1 Message)
Upton, Shawn (1 Message)
Wayne Showers (12 Messages)
Wayne Thayer (5 Messages)
Yow GawChern (1 Message)
Yuan-chia Joyce Koo (24 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender <>
IPC-J-DTD-003C w/amend1, Solder Float Test
<>
Mon, 5 Mar 2018 17:45:01 +0000
Re: Non Functioning pads
<>
Mon, 5 Mar 2018 16:11:40 +0000
TM-650-2.1.1; 2.1.1.2 & 2.6.8
<>
Mon, 5 Mar 2018 18:36:43 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
<>
Thu, 8 Mar 2018 13:49:00 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
<>
Thu, 8 Mar 2018 14:49:52 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
<>
Thu, 8 Mar 2018 18:23:41 +0000
FW: TM-650-2.6.8, Thermal Stress. Plated-Through Holes
<>
Mon, 12 Mar 2018 10:34:14 +0000
New Sender Ahmad, Syed
Solder interconnect limits
Ahmad, Syed
Thu, 22 Mar 2018 16:07:10 +0000
New Sender BEV CHRISTIAN
Re: Bottom Termination Components (BTC) Voiding Limits
BEV CHRISTIAN
Mon, 5 Mar 2018 15:21:13 -0500
Is there such a thing as a 006003 chip component yet?
BEV CHRISTIAN
Tue, 6 Mar 2018 10:13:05 -0500
Re: Is there such a thing as a 006003 chip component yet?
BEV CHRISTIAN
Thu, 8 Mar 2018 11:35:55 -0500
Re: LTCC
BEV CHRISTIAN
Wed, 28 Mar 2018 15:52:47 -0400
Re: Solderbility testing SOT 666
BEV CHRISTIAN
Tue, 27 Mar 2018 12:56:40 -0400
Re: when is there too much rework on a circuit board
BEV CHRISTIAN
Wed, 28 Mar 2018 15:58:56 -0400
Re: when is there too much rework on a circuit board
BEV CHRISTIAN
Wed, 28 Mar 2018 20:49:47 -0400
Re: X-ray damage to components
BEV CHRISTIAN
Tue, 20 Mar 2018 12:37:06 -0400
Re: X-ray damage to components
BEV CHRISTIAN
Tue, 20 Mar 2018 13:22:47 -0400
New Sender Bhanu Sood
Re: Element Quiz Question
Bhanu Sood
Thu, 29 Mar 2018 18:07:05 -0400
Re: when is there too much rework on a circuit board
Bhanu Sood
Wed, 28 Mar 2018 14:03:00 -0400
New Sender Bob Wettermann
Re: BGA and other array package rework
Bob Wettermann
Sat, 31 Mar 2018 06:24:27 -0500
Jetting Solder Paste Eperiences?
Bob Wettermann
Tue, 20 Mar 2018 15:23:26 -0500
Re: LTCC
Bob Wettermann
Wed, 28 Mar 2018 14:45:01 -0500
Re: when is there too much rework on a circuit board
Bob Wettermann
Wed, 28 Mar 2018 15:17:20 -0500
New Sender Brian Ellis
Re: Element Quiz Question
Brian Ellis
Fri, 9 Mar 2018 14:09:50 +0200
Re: NTC My new book
Brian Ellis
Thu, 1 Mar 2018 17:22:03 +0200
New Sender Caitlen Gahm
Conformal Coating on Edge of CCA
Caitlen Gahm
Thu, 1 Mar 2018 09:45:26 -0600
New Sender CANTAGALLO Luigi
SnPb solder joints. Operating temperature
CANTAGALLO Luigi
Thu, 1 Mar 2018 08:13:00 +0100
New Sender Carl Van Wormer
Re: Element Quiz Question
Carl Van Wormer
Thu, 29 Mar 2018 21:46:25 +0000
Wave soldering with SMT parts on bottom of board
Carl Van Wormer
Mon, 12 Mar 2018 21:22:53 +0000
New Sender Carroll, Thomas A
Re: Element Quiz Question
Carroll, Thomas A
Fri, 9 Mar 2018 12:43:21 +0000
Re: Element Quiz Question
Carroll, Thomas A
Fri, 30 Mar 2018 11:58:46 +0000
New Sender Chris Mahanna
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Chris Mahanna
Thu, 8 Mar 2018 18:10:02 +0000
New Sender Dave Schaefer
BGA Heatsink Compression
Dave Schaefer
Wed, 14 Mar 2018 11:49:00 -0500
New Sender David Hillman
Re: AOI for Coating Inspection ???
David Hillman
Tue, 20 Mar 2018 15:30:33 -0500
Re: Bottom Termination Components (BTC) Voiding Limits
David Hillman
Sat, 3 Mar 2018 18:53:54 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
David Hillman
Mon, 5 Mar 2018 13:50:10 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
David Hillman
Mon, 5 Mar 2018 18:43:09 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
David Hillman
Tue, 6 Mar 2018 07:50:38 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
David Hillman
Tue, 6 Mar 2018 17:04:06 -0600
Element Quiz Answer
David Hillman
Fri, 9 Mar 2018 15:00:06 -0600
Element Quiz Answer
David Hillman
Fri, 30 Mar 2018 12:59:50 -0500
Element Quiz Question
David Hillman
Fri, 9 Mar 2018 06:02:54 -0600
Element Quiz Question
David Hillman
Thu, 29 Mar 2018 16:40:38 -0500
Source for Welded Component Lead Extensions - Old School Technology
David Hillman
Thu, 22 Mar 2018 07:40:39 -0500
Re: when is there too much rework on a circuit board
David Hillman
Wed, 28 Mar 2018 13:06:44 -0500
Re: when is there too much rework on a circuit board
David Hillman
Wed, 28 Mar 2018 13:50:50 -0500
New Sender Decker, Scott UTAS
Re: when is there too much rework on a circuit board
Decker, Scott UTAS
Wed, 28 Mar 2018 20:19:04 +0000
Re: [External] Re: [TN] Conformal Coating on Edge of CCA
Decker, Scott UTAS
Mon, 5 Mar 2018 17:38:14 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 9 Mar 2018 15:45:39 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 9 Mar 2018 16:09:03 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Fri, 9 Mar 2018 16:17:12 +0000
Re: [External] [TN] Element Quiz Question
Decker, Scott UTAS
Thu, 29 Mar 2018 22:29:03 +0000
New Sender Douglas Pauls
Re: AOI for Coating Inspection ???
Douglas Pauls
Tue, 20 Mar 2018 16:08:50 -0500
Re: Conformal Coating on Edge of CCA
Douglas Pauls
Thu, 1 Mar 2018 08:24:09 -0800
Re: Conformal Coating on Edge of CCA
Douglas Pauls
Mon, 5 Mar 2018 10:18:15 -0600
Re: Element Quiz Answer
Douglas Pauls
Fri, 30 Mar 2018 15:32:09 -0500
LTCC
Douglas Pauls
Wed, 28 Mar 2018 13:20:20 -0500
Re: LTCC
Douglas Pauls
Thu, 29 Mar 2018 11:41:50 -0500
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Douglas Pauls
Thu, 8 Mar 2018 07:52:59 -0600
Re: [External] [TN] Element Quiz Question
Douglas Pauls
Fri, 9 Mar 2018 10:14:47 -0600
New Sender Drew meyer
Re: Element Quiz Answer
Drew meyer
Fri, 30 Mar 2018 18:31:05 +0000
Re: [External] [TN] Element Quiz Question
Drew meyer
Fri, 30 Mar 2018 12:18:30 +0000
New Sender Dwight Mattix
Re: Non Functioning pads
Dwight Mattix
Mon, 5 Mar 2018 16:51:31 +0000
Re: Non Functioning pads
Dwight Mattix
Mon, 5 Mar 2018 16:58:10 +0000
Re: Non Functioning pads
Dwight Mattix
Mon, 5 Mar 2018 17:59:33 +0000
Re: Non Functioning pads
Dwight Mattix
Mon, 5 Mar 2018 18:04:04 +0000
Re: Non Functioning pads
Dwight Mattix
Mon, 5 Mar 2018 19:27:39 +0000
New Sender Frank Kimmey
Re: [EXT] Re: [TN] Non Functioning pads
Frank Kimmey
Mon, 5 Mar 2018 19:21:44 +0000
New Sender FTL Quality
Re: [External] [TN] Element Quiz Question
FTL Quality
Fri, 30 Mar 2018 08:09:29 +0100
New Sender Gary Crowell
Re: Is there such a thing as a 006003 chip component yet?
Gary Crowell
Thu, 8 Mar 2018 09:39:17 -0700
New Sender Graham Naisbitt
Solderbility testing SOT 666
Graham Naisbitt
Tue, 27 Mar 2018 17:40:45 +0100
Re: Solderbility testing SOT 666
Graham Naisbitt
Wed, 28 Mar 2018 10:16:50 +0100
New Sender Guy Ramsey
BGA and other array package rework
Guy Ramsey
Fri, 30 Mar 2018 16:18:58 -0400
X-ray damage to components
Guy Ramsey
Tue, 20 Mar 2018 11:50:03 -0400
Re: X-ray damage to components
Guy Ramsey
Tue, 20 Mar 2018 12:47:14 -0400
New Sender Jack Olson
Re: Conformal Coating on Edge of CCA
Jack Olson
Mon, 5 Mar 2018 10:00:08 -0600
Re: Conformal Coating on Edge of CCA
Jack Olson
Mon, 5 Mar 2018 11:12:10 -0600
Re: Non Functioning pads
Jack Olson
Mon, 5 Mar 2018 09:48:43 -0600
Re: Non Functioning pads
Jack Olson
Mon, 5 Mar 2018 11:47:52 -0600
Re: Non Functioning pads
Jack Olson
Mon, 5 Mar 2018 12:01:10 -0600
Re: Non Functioning pads
Jack Olson
Mon, 5 Mar 2018 12:02:23 -0600
New Sender Joe Russeau
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Joe Russeau
Thu, 8 Mar 2018 11:34:14 -0500
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Joe Russeau
Thu, 8 Mar 2018 20:49:20 -0500
New Sender John Burke
Re: BGA and other array package rework
John Burke
Sat, 31 Mar 2018 15:39:53 +0000
Re: Element Quiz Question
John Burke
Fri, 9 Mar 2018 15:09:29 +0000
Re: Jetting Solder Paste Eperiences?
John Burke
Tue, 20 Mar 2018 13:41:24 -0700
Re: X-ray damage to components
John Burke
Tue, 20 Mar 2018 16:01:21 +0000
New Sender Jose A Rios
Re: Non Functioning pads
Jose A Rios
Mon, 5 Mar 2018 16:50:37 +0000
Re: Non Functioning pads
Jose A Rios
Mon, 5 Mar 2018 18:43:39 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Jose A Rios
Thu, 8 Mar 2018 15:40:26 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Jose A Rios
Thu, 8 Mar 2018 15:51:32 +0000
Re: when is there too much rework on a circuit board
Jose A Rios
Wed, 28 Mar 2018 19:15:11 +0000
New Sender Larry Dzaugis
Re: Element Quiz Question
Larry Dzaugis
Fri, 9 Mar 2018 10:03:16 -0500
Re: Solderbility testing SOT 666
Larry Dzaugis
Tue, 27 Mar 2018 13:30:28 -0400
Re: when is there too much rework on a circuit board
Larry Dzaugis
Wed, 28 Mar 2018 17:47:17 -0400
New Sender lduso - Diamond-MT.com
Re: AOI for Coating Inspection ???
lduso - Diamond-MT.com
Tue, 20 Mar 2018 12:15:19 -0400
Re: Conformal Coating on Edge of CCA
lduso - Diamond-MT.com
Thu, 1 Mar 2018 11:01:16 -0500
New Sender Leland Woodall
Re: Element Quiz Question
Leland Woodall
Fri, 9 Mar 2018 13:08:25 +0000
New Sender Matthias Mansfeld
Re: 0402 suitable for solder wave?
Matthias Mansfeld
Wed, 7 Mar 2018 12:02:41 +0100
Re: X-ray damage to components
Matthias Mansfeld
Tue, 20 Mar 2018 21:10:10 +0100
New Sender Mumtaz Bora
ENEPIG Solderability Test Failure for LGA Package
Mumtaz Bora
Mon, 12 Mar 2018 16:25:35 +0000
New Sender Nigel Burtt
Re: Is there such a thing as a 006003 chip component yet?
Nigel Burtt
Thu, 8 Mar 2018 10:21:05 -0600
Re: X-ray damage to components
Nigel Burtt
Wed, 21 Mar 2018 04:13:39 -0500
New Sender Nutting, Phil
when is there too much rework on a circuit board
Nutting, Phil
Wed, 28 Mar 2018 17:40:17 +0000
Re: when is there too much rework on a circuit board
Nutting, Phil
Wed, 28 Mar 2018 18:41:11 +0000
Re: when is there too much rework on a circuit board
Nutting, Phil
Wed, 28 Mar 2018 19:53:12 +0000
New Sender Richard Kraszewski
AOI for Coating Inspection ???
Richard Kraszewski
Tue, 20 Mar 2018 16:00:50 +0000
New Sender Robert Kondner
Re: Jetting Solder Paste Experiences?
Robert Kondner
Tue, 20 Mar 2018 17:34:34 -0400
New Sender Ron Feyereisen
Re: Element Quiz Question
Ron Feyereisen
Fri, 9 Mar 2018 14:58:10 +0000
New Sender SALA GABRIELE
R: [TN] 0402 suitable for solder wave?
SALA GABRIELE
Wed, 7 Mar 2018 12:01:00 +0100
R: [TN] Bottom Termination Components (BTC) Voiding Limits
SALA GABRIELE
Mon, 5 Mar 2018 18:26:19 +0100
R: [TN] Bottom Termination Components (BTC) Voiding Limits
SALA GABRIELE
Mon, 5 Mar 2018 21:02:08 +0100
R: [TN] Solderbility testing SOT 666
SALA GABRIELE
Tue, 27 Mar 2018 23:08:33 +0200
New Sender Stadem, Richard D
Re: Bottom Termination Components (BTC) Voiding Limits
Stadem, Richard D
Mon, 5 Mar 2018 14:04:08 +0000
Re: Bottom Termination Components (BTC) Voiding Limits
Stadem, Richard D
Tue, 6 Mar 2018 13:06:57 +0000
Re: Bottom Termination Components (BTC) Voiding Limits
Stadem, Richard D
Tue, 6 Mar 2018 14:59:46 +0000
Re: Industrial scanners
Stadem, Richard D
Mon, 26 Mar 2018 12:30:32 +0000
Re: Is there such a thing as a 006003 chip component yet?
Stadem, Richard D
Tue, 6 Mar 2018 16:20:46 +0000
Re: Is there such a thing as a 006003 chip component yet?
Stadem, Richard D
Thu, 8 Mar 2018 17:04:20 +0000
Re: Jetting Solder Paste Experiences?
Stadem, Richard D
Tue, 20 Mar 2018 21:46:07 +0000
Re: LTCC
Stadem, Richard D
Thu, 29 Mar 2018 12:12:41 +0000
Re: LTCC
Stadem, Richard D
Thu, 29 Mar 2018 18:52:28 +0000
Re: LTCC NTC
Stadem, Richard D
Thu, 29 Mar 2018 19:11:42 +0000
Re: R: [TN] 0402 suitable for solder wave?
Stadem, Richard D
Wed, 7 Mar 2018 13:56:23 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Stadem, Richard D
Thu, 8 Mar 2018 14:31:01 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Stadem, Richard D
Thu, 8 Mar 2018 15:23:18 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Stadem, Richard D
Thu, 8 Mar 2018 16:59:48 +0000
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Stadem, Richard D
Thu, 8 Mar 2018 19:32:13 +0000
New Sender Steve Gregory
Re: BGA and other array package rework
Steve Gregory
Fri, 30 Mar 2018 14:41:19 -0600
Re: BGA Heatsink Compression
Steve Gregory
Wed, 14 Mar 2018 11:06:53 -0600
Re: NTC My new book
Steve Gregory
Thu, 1 Mar 2018 08:06:14 -0700
Re: Wave soldering with SMT parts on bottom of board
Steve Gregory
Mon, 12 Mar 2018 16:44:16 -0600
New Sender Tan Geok Ang
Re: Conductive Epoxy Inspection Criteria on Flex for LED
Tan Geok Ang
Sat, 3 Mar 2018 01:24:45 +0000
LCC package pads/terminals qualification test
Tan Geok Ang
Sat, 3 Mar 2018 00:42:14 +0000
Re: LCC package pads/terminals qualification test
Tan Geok Ang
Mon, 5 Mar 2018 07:00:21 +0000
New Sender Tempea, Ioan
Industrial scanners
Tempea, Ioan
Wed, 14 Mar 2018 18:55:12 +0000
Re: Industrial scanners
Tempea, Ioan
Fri, 23 Mar 2018 18:18:43 +0000
Re: Industrial scanners
Tempea, Ioan
Fri, 23 Mar 2018 18:32:49 +0000
Re: Wave soldering with SMT parts on bottom of board
Tempea, Ioan
Wed, 14 Mar 2018 11:56:06 +0000
New Sender Tom Newton
Re: IPC-J-DTD-003C w/amend1, Solder Float Test
Tom Newton
Mon, 5 Mar 2018 17:59:58 +0000
New Sender Upton, Shawn
Re: Is there such a thing as a 006003 chip component yet?
Upton, Shawn
Tue, 6 Mar 2018 15:21:41 +0000
New Sender Wayne Showers
Re: BGA Heatsink Compression
Wayne Showers
Wed, 14 Mar 2018 15:07:00 -0500
Bottom Termination Components (BTC) Voiding Limits
Wayne Showers
Sat, 3 Mar 2018 18:18:00 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
Wayne Showers
Mon, 5 Mar 2018 15:51:16 -0600
Re: Bottom Termination Components (BTC) Voiding Limits
Wayne Showers
Tue, 6 Mar 2018 08:36:48 -0600
Re: Element Quiz Answer
Wayne Showers
Fri, 30 Mar 2018 13:13:10 -0500
Re: Industrial scanners
Wayne Showers
Wed, 14 Mar 2018 14:41:05 -0500
Re: Is there such a thing as a 006003 chip component yet?
Wayne Showers
Tue, 6 Mar 2018 09:47:19 -0600
Re: LTCC
Wayne Showers
Wed, 28 Mar 2018 14:51:25 -0500
Re: Solderbility testing SOT 666
Wayne Showers
Tue, 27 Mar 2018 12:19:02 -0500
Re: Wave soldering with SMT parts on bottom of board
Wayne Showers
Wed, 14 Mar 2018 15:22:15 -0500
Re: when is there too much rework on a circuit board
Wayne Showers
Wed, 28 Mar 2018 14:34:03 -0500
Re: [External] [TN] Element Quiz Question
Wayne Showers
Thu, 29 Mar 2018 20:14:51 -0500
New Sender Wayne Thayer
Re: Industrial scanners
Wayne Thayer
Fri, 23 Mar 2018 11:06:42 -0700
Re: Industrial scanners
Wayne Thayer
Fri, 23 Mar 2018 11:26:47 -0700
Re: Solder interconnect limits
Wayne Thayer
Fri, 23 Mar 2018 11:20:43 -0700
Re: Wave soldering with SMT parts on bottom of board
Wayne Thayer
Mon, 12 Mar 2018 20:13:42 -0700
Re: Wave soldering with SMT parts on bottom of board
Wayne Thayer
Tue, 13 Mar 2018 21:15:35 -0700
New Sender Yow GawChern
0402 suitable for solder wave?
Yow GawChern
Wed, 7 Mar 2018 04:14:30 -0600
New Sender Yuan-chia Joyce Koo
Re: BGA Heatsink Compression
Yuan-chia Joyce Koo
Wed, 14 Mar 2018 13:21:29 -0400
Re: Bottom Termination Components (BTC) Voiding Limits
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 10:31:08 -0500
Re: Bottom Termination Components (BTC) Voiding Limits
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 10:35:53 -0500
Re: Bottom Termination Components (BTC) Voiding Limits
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 16:30:24 -0500
Re: Bottom Termination Components (BTC) Voiding Limits
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 17:02:14 -0500
Re: Conformal Coating on Edge of CCA
Yuan-chia Joyce Koo
Thu, 1 Mar 2018 12:47:24 -0500
Re: Element Quiz Answer
Yuan-chia Joyce Koo
Fri, 30 Mar 2018 17:04:51 -0400
Re: Element Quiz Question
Yuan-chia Joyce Koo
Fri, 9 Mar 2018 07:52:10 -0500
Re: Element Quiz Question
Yuan-chia Joyce Koo
Thu, 29 Mar 2018 17:53:40 -0400
Re: LTCC
Yuan-chia Joyce Koo
Wed, 28 Mar 2018 16:46:27 -0400
Re: LTCC
Yuan-chia Joyce Koo
Thu, 29 Mar 2018 12:56:13 -0400
Re: Non Functioning pads
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 11:00:47 -0500
Re: Non Functioning pads
Yuan-chia Joyce Koo
Mon, 5 Mar 2018 14:21:16 -0500
Re: NTC My new book
Yuan-chia Joyce Koo
Thu, 1 Mar 2018 10:42:27 -0500
Re: SnPb solder joints. Operating temperature
Yuan-chia Joyce Koo
Thu, 1 Mar 2018 06:14:27 -0500
Re: Solder interconnect limits
Yuan-chia Joyce Koo
Thu, 22 Mar 2018 14:36:48 -0400
Re: Solder interconnect limits
Yuan-chia Joyce Koo
Thu, 22 Mar 2018 14:38:55 -0400
Re: Solder interconnect limits
Yuan-chia Joyce Koo
Fri, 23 Mar 2018 17:12:41 -0400
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Yuan-chia Joyce Koo
Thu, 8 Mar 2018 09:18:51 -0500
Re: TM-650-2.1.1; 2.1.1.2 & 2.6.8
Yuan-chia Joyce Koo
Fri, 9 Mar 2018 04:49:40 -0500
Re: Wave soldering with SMT parts on bottom of board
Yuan-chia Joyce Koo
Tue, 13 Mar 2018 08:25:43 -0400
Re: when is there too much rework on a circuit board
Yuan-chia Joyce Koo
Wed, 28 Mar 2018 16:31:25 -0400
Re: when is there too much rework on a circuit board
Yuan-chia Joyce Koo
Wed, 28 Mar 2018 17:06:13 -0400
Re: X-ray damage to components
Yuan-chia Joyce Koo
Tue, 20 Mar 2018 15:39:36 -0400

ATOM RSS1 RSS2