LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Dennis Fritz

Thu, 18 Sep 2014 17:20:22 -0400

Gregg Owens

Thu, 18 Sep 2014 22:20:27 +0000

Steve Gregory

Thu, 18 Sep 2014 16:52:45 -0600

Stadem, Richard D.

Fri, 19 Sep 2014 11:30:03 +0000

Lum Wee Mei

Sat, 20 Sep 2014 07:16:31 +0000

Au embrittlement

Vladimir Igoshev

Fri, 19 Sep 2014 09:17:24 -0400

David Hillman

Fri, 19 Sep 2014 08:50:03 -0500

Vladimir Igoshev

Fri, 19 Sep 2014 09:54:26 -0400

Steve Gregory

Fri, 19 Sep 2014 07:54:54 -0600

Guy Ramsey

Fri, 19 Sep 2014 10:04:16 -0400

Yuan-chia Joyce Koo

Fri, 19 Sep 2014 10:05:40 -0400

Vladimir Igoshev

Fri, 19 Sep 2014 10:08:34 -0400

David Hillman

Fri, 19 Sep 2014 09:15:22 -0500

can ENIG be used for PCB card edge fingers?

Mike Fenner

Fri, 19 Sep 2014 21:28:52 +0100

Carl VanWormer

Wed, 17 Sep 2014 22:13:50 +0000

Re: can ENIG be used for PCB card edge fingers?

Yuan-chia Joyce Koo

Wed, 17 Sep 2014 21:07:30 -0400

Re: can ENIG be used for PCB card edge fingers?

Grunde Gjertsen

Thu, 18 Sep 2014 07:39:35 +0000

Re: can ENIG be used for PCB card edge fingers?

Louis Hart

Thu, 18 Sep 2014 12:19:18 +0000

Chamfered PCB

Kuczynski, Michael

Thu, 18 Sep 2014 14:52:37 +0000

Ed Popielarski

Thu, 18 Sep 2014 14:59:28 +0000

Giamis, Andy

Thu, 18 Sep 2014 09:59:57 -0500

Victor Hernandez

Thu, 18 Sep 2014 10:07:56 -0500

Kuczynski, Michael

Thu, 18 Sep 2014 15:18:34 +0000

Stadem, Richard D.

Thu, 18 Sep 2014 15:29:22 +0000

Gary Crowell

Thu, 18 Sep 2014 10:18:45 -0600

Stadem, Richard D.

Thu, 18 Sep 2014 17:08:33 +0000

Kuczynski, Michael

Thu, 18 Sep 2014 17:16:18 +0000

Chip Resistor termination end solder covering part marking.

Ed Popielarski

Thu, 18 Sep 2014 17:34:20 +0000

Jim West

Fri, 26 Sep 2014 17:00:45 +0000

FW: Chip Resistor termination end solder covering part marking.

Victor Hernandez

Fri, 26 Sep 2014 12:43:16 -0500

Re: Chip Resistor termination end solder covering part marking.

Jim West

Fri, 26 Sep 2014 17:56:49 +0000

Re: Chip Resistor termination end solder covering part marking.

Guy Ramsey

Fri, 26 Sep 2014 14:49:44 -0400

Re: Chip Resistor termination end solder covering part marking.

David Hillman

Fri, 26 Sep 2014 14:20:25 -0500

Re: Chip Resistor termination end solder covering part marking.

Rueda, Ernesto

Fri, 26 Sep 2014 12:35:52 -0700

Re: Chip Resistor termination end solder covering part marking.

Yuan-chia Joyce Koo

Fri, 26 Sep 2014 21:24:19 -0400

Re: Chip Resistor termination end solder covering part marking.

Ramon Essers | ETECH-trainingen

Sat, 27 Sep 2014 09:55:23 +0200

Re: Chip Resistor termination end solder covering part marking.

Yuan-chia Joyce Koo

Sat, 27 Sep 2014 08:30:54 -0400

Re: Chip Resistor termination end solder covering part marking.

Yuan-chia Joyce Koo

Sat, 27 Sep 2014 08:32:54 -0400

Circuit Scribe

Patrick Goodyear

Tue, 9 Sep 2014 15:09:55 -0400

DIMM Socket press-fit Misalignment

Re: DIMM Socket press-fit Misalignment

McGrath, Jim

Wed, 24 Sep 2014 09:29:53 -0400

DIMM Socket press-fit Misaliment

Lyon

Wed, 24 Sep 2014 19:27:08 +0800

Re: DIMM Socket press-fit Misaliment

Lyon

Wed, 24 Sep 2014 19:34:13 +0800

Re: DIMM Socket press-fit Misaliment

Louis Hart

Wed, 24 Sep 2014 12:53:03 +0000

Re: DIMM Socket press-fit Misaliment

Theodore J Tontis

Wed, 24 Sep 2014 12:59:18 +0000

Electrical Spacing, Clearance to PTH copper barrel, IPC-6012C

Victor Hernandez

Mon, 22 Sep 2014 09:10:37 -0500

Electrical Spacing, Clearance to PTH copper barrel, IPC-6012C

Victor Hernandez

Mon, 22 Sep 2014 13:50:29 -0500

Re: Electrical Spacing, Clearance to PTH copper barrel, IPC-6012C

Louis Hart

Mon, 22 Sep 2014 19:19:55 +0000

Re: Electrical Spacing, Clearance to PTH copper barrel, IPC-6012C

Yuan-chia Joyce Koo

Mon, 22 Sep 2014 16:22:02 -0400

David Hillman

Fri, 5 Sep 2014 14:47:01 -0500

Graham Collins

Mon, 8 Sep 2014 07:59:52 -0300

David Hillman

Fri, 12 Sep 2014 13:34:15 -0500

Douglas Pauls

Fri, 12 Sep 2014 14:45:00 -0500

Bev Christian

Fri, 12 Sep 2014 20:43:50 -0400

Stadem, Richard D.

Mon, 15 Sep 2014 12:40:29 +0000

David Hillman

Mon, 15 Sep 2014 07:42:45 -0500

Douglas Pauls

Mon, 15 Sep 2014 07:46:40 -0500

Ed Popielarski

Mon, 15 Sep 2014 15:31:34 +0000

Brian Ellis

Mon, 15 Sep 2014 18:43:02 +0300

Craig Cullum

Mon, 15 Sep 2014 16:48:48 +0000

Douglas Pauls

Mon, 15 Sep 2014 12:02:22 -0500

Bev Christian

Mon, 15 Sep 2014 20:40:29 -0400

Stadem, Richard D.

Tue, 16 Sep 2014 12:17:17 +0000

James Head

Thu, 18 Sep 2014 16:57:04 +0100

David Hillman

Sun, 21 Sep 2014 20:20:17 -0500

David Hillman

Fri, 26 Sep 2014 14:10:48 -0500

Patrick Goodyear

Sat, 27 Sep 2014 02:05:31 -0400

David Hillman

Fri, 5 Sep 2014 06:30:02 -0500

James Head

Fri, 5 Sep 2014 12:34:11 +0100

Graham Collins

Fri, 5 Sep 2014 08:39:21 -0300

Brian Ellis

Fri, 5 Sep 2014 14:41:41 +0300

Craig Cullum

Fri, 5 Sep 2014 19:08:29 +0000

David Hillman

Fri, 12 Sep 2014 06:16:44 -0500

James Head

Fri, 12 Sep 2014 12:20:21 +0100

Keith Calhoun

Fri, 12 Sep 2014 07:21:49 -0400

Graham Collins

Fri, 12 Sep 2014 08:24:04 -0300

Douglas Pauls

Fri, 12 Sep 2014 07:39:34 -0500

Patrick Goodyear

Fri, 12 Sep 2014 13:28:09 -0400

David Hillman

Fri, 19 Sep 2014 07:06:06 -0500

MacFadden, Todd

Fri, 19 Sep 2014 12:08:13 +0000

Leland Woodall

Fri, 19 Sep 2014 12:10:58 +0000

May, William D (Dean) CIV NSWC Crane, GXSP

Fri, 19 Sep 2014 12:25:38 +0000

Brian Ellis

Fri, 19 Sep 2014 15:31:59 +0300

Bush, Brien

Fri, 19 Sep 2014 12:49:04 +0000

James Head

Fri, 19 Sep 2014 14:12:35 +0100

Jim West

Fri, 19 Sep 2014 13:20:26 +0000

Yuan-chia Joyce Koo

Fri, 19 Sep 2014 09:57:36 -0400

Douglas Pauls

Fri, 19 Sep 2014 09:01:55 -0500

Yuan-chia Joyce Koo

Fri, 19 Sep 2014 10:08:44 -0400

David Hillman

Fri, 19 Sep 2014 09:12:13 -0500

Stadem, Richard D.

Fri, 19 Sep 2014 14:18:00 +0000

Larry Dzaugis

Fri, 19 Sep 2014 12:59:22 -0400

Phil Bavaro

Fri, 19 Sep 2014 17:16:39 +0000

Patrick Goodyear

Fri, 19 Sep 2014 14:35:29 -0400

David Hillman

Thu, 25 Sep 2014 17:30:31 -0500

Ed Popielarski

Thu, 25 Sep 2014 22:58:40 +0000

Ed Popielarski

Thu, 25 Sep 2014 23:00:11 +0000

Patrick Goodyear

Thu, 25 Sep 2014 23:13:22 -0400

James Head

Fri, 26 Sep 2014 11:12:58 +0100

Brian Ellis

Fri, 26 Sep 2014 16:59:38 +0300

Guy Ramsey

Fri, 26 Sep 2014 10:10:14 -0400

Jim West

Fri, 26 Sep 2014 17:46:29 +0000

Re: External foil separation

Bill Coleman

Fri, 26 Sep 2014 17:52:13 +0000

External foil separation

Pradeep Menon

Mon, 8 Sep 2014 13:51:05 +0000

Pradeep Menon

Mon, 8 Sep 2014 14:12:25 +0000

Re: External foil separation

Yuan-chia Joyce Koo

Mon, 8 Sep 2014 11:32:46 -0400

EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Gumpert, Ben

Fri, 5 Sep 2014 16:00:41 +0000

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Guy Ramsey

Fri, 5 Sep 2014 12:08:11 -0400

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Yuan-chia Joyce Koo

Fri, 5 Sep 2014 13:04:21 -0400

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Ahne Oosterhof

Fri, 5 Sep 2014 11:21:50 -0700

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Grunde Gjertsen

Mon, 8 Sep 2014 07:30:23 +0000

Re: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.

Tan Geok Ang

Mon, 8 Sep 2014 07:56:33 +0000

Failure Mode Analysis Engineer opportunity at CommScope

Giamis, Andy

Tue, 9 Sep 2014 11:42:05 -0500

Re: Failure Mode Analysis Engineer opportunity at CommScope

Stadem, Richard D.

Tue, 9 Sep 2014 17:36:09 +0000

Going from Laser Cut to Electroformed Stencil w/Nano Coating

Jim West

Thu, 11 Sep 2014 14:32:30 +0000

Re: Going from Laser Cut to Electroformed Stencil w/Nano Coating

Yuan-chia Joyce Koo

Thu, 11 Sep 2014 11:24:18 -0400

Jack McCullen passed away

Mike Buetow

Mon, 8 Sep 2014 13:33:42 -0400

Re: Jack McCullen passed away

Yuan-chia Joyce Koo

Mon, 8 Sep 2014 13:42:44 -0400

Re: Jack McCullen passed away

Mumtaz Bora

Mon, 8 Sep 2014 18:34:52 +0000

Re: Jack McCullen passed away

Syed Ahmad

Mon, 8 Sep 2014 18:48:45 +0000

lead free (RoHS) testing in manufacturing

Graham Collins

Tue, 16 Sep 2014 15:37:03 -0300

Ed Popielarski

Tue, 16 Sep 2014 18:54:08 +0000

Bev Christian

Tue, 16 Sep 2014 21:38:35 -0400

Patrick Goodyear

Tue, 16 Sep 2014 23:07:48 -0400

Wenger, George M. [Contractor]

Wed, 17 Sep 2014 08:44:09 -0500

Steve Gregory

Wed, 17 Sep 2014 09:37:59 -0600

Ioan TEMPEA

Wed, 17 Sep 2014 16:53:36 +0000

Julie Silk

Wed, 17 Sep 2014 12:02:11 -0500

Bev Christian

Wed, 17 Sep 2014 21:12:02 -0400

Grunde Gjertsen

Thu, 18 Sep 2014 08:24:02 +0000

Manual Soldering - 6-UFDFN

Julie Silk

Thu, 18 Sep 2014 10:54:09 -0500

Jean-Francois Bissonnette

Thu, 4 Sep 2014 15:06:26 -0400

Re: Manual Soldering - 6-UFDFN

Bob Wettermann

Thu, 4 Sep 2014 14:46:46 -0500

NOT Recognizing Panel Fiducials at paste printer.

Jim West

Thu, 4 Sep 2014 19:54:41 +0000

Re: NOT Recognizing Panel Fiducials at paste printer.

Stephen Gregory

Thu, 4 Sep 2014 14:29:05 -0600

Re: NOT Recognizing Panel Fiducials at paste printer.

Wenger, George M. [Contractor]

Thu, 4 Sep 2014 15:38:32 -0500

Re: NOT Recognizing Panel Fiducials at paste printer.

Ioan TEMPEA

Fri, 5 Sep 2014 11:52:14 +0000

Re: NOT Recognizing Panel Fiducials at paste printer.

Jim West

Fri, 5 Sep 2014 13:47:06 +0000

Re: NOT Recognizing Panel Fiducials at paste printer.

Weller, Tim

Fri, 5 Sep 2014 08:59:34 -0500

Re: NOT Recognizing Panel Fiducials at paste printer.

Guy Ramsey

Fri, 5 Sep 2014 11:34:21 -0400

Re: NOT Recognizing Panel Fiducials at paste printer.

Jerry Dengler

Fri, 5 Sep 2014 11:42:07 -0400

Re: NOT Recognizing Panel Fiducials at paste printer.

Brian Chandler

Mon, 8 Sep 2014 10:18:56 -0500

R: [TN] Chip Resistor termination end solder covering part marking.

SALA GABRIELE

Sat, 27 Sep 2014 10:26:30 +0200

R: [TN] fluids covered by RoHS?

Robert Kondner

Mon, 1 Sep 2014 11:31:56 -0400

Yuan-chia Joyce Koo

Mon, 1 Sep 2014 14:21:21 -0400

Olav Folland

Tue, 2 Sep 2014 08:58:13 -0700

R: [TN] lead free (RoHS) testing in manufacturing

Drew meyer

Tue, 2 Sep 2014 11:13:01 -0500

SALA GABRIELE

Tue, 16 Sep 2014 23:52:45 +0200

Reballing validation

Juan T. Marugán

Tue, 30 Sep 2014 16:13:31 -0500

Re: Reballing validation

Steve Gregory

Tue, 30 Sep 2014 15:41:21 -0600

RES: [TN] selective soldering - what machine?

Datacom - Juliano Ribeiro

Thu, 4 Sep 2014 15:32:11 -0300

selective soldering - what machine?

Graham Collins

Thu, 4 Sep 2014 14:54:29 -0300

Larry Dzaugis

Thu, 4 Sep 2014 14:57:24 -0400

Bush, Brien

Fri, 5 Sep 2014 15:55:45 +0000

Stadem, Richard D.

Fri, 5 Sep 2014 16:06:43 +0000

SMT capture pad, Side 2 - Bayesian Filter detected spam

Richard Krug

Fri, 5 Sep 2014 19:45:33 +0000

SMT capture pad, Side 2

Victor Hernandez

Thu, 4 Sep 2014 12:22:06 -0500

Re: SMT capture pad, Side 2 - Bayesian Filter detected spam

Bush, Brien

Fri, 5 Sep 2014 15:50:19 +0000

tinning wires - flux entrapment and long term reliability

Re: tinning wires - flux entrapment and long term reliability

Nutting, Phil

Fri, 5 Sep 2014 16:55:43 +0000

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Fri, 5 Sep 2014 20:00:26 +0000

Re: tinning wires - flux entrapment and long term reliability

David Hillman

Fri, 5 Sep 2014 16:02:42 -0500

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 12:28:39 +0000

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 08:58:29 -0400

Re: tinning wires - flux entrapment and long term reliability

Karen Tellefsen

Mon, 8 Sep 2014 09:02:20 -0400

Re: tinning wires - flux entrapment and long term reliability

Karen Tellefsen

Mon, 8 Sep 2014 09:05:00 -0400

Re: tinning wires - flux entrapment and long term reliability

David Hillman

Mon, 8 Sep 2014 08:22:31 -0500

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 09:57:32 -0400

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 14:00:56 +0000

Re: tinning wires - flux entrapment and long term reliability

David Hillman

Mon, 8 Sep 2014 09:09:44 -0500

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 10:28:55 -0400

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 10:34:49 -0400

Re: tinning wires - flux entrapment and long term reliability

David Hillman

Mon, 8 Sep 2014 09:43:20 -0500

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 11:15:52 -0400

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 15:26:43 +0000

Re: tinning wires - flux entrapment and long term reliability

Guy Ramsey

Mon, 8 Sep 2014 11:28:00 -0400

Re: tinning wires - flux entrapment and long term reliability

David Hillman

Mon, 8 Sep 2014 10:34:19 -0500

Re: tinning wires - flux entrapment and long term reliability

Yuan-chia Joyce Koo

Mon, 8 Sep 2014 11:41:08 -0400

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 12:01:35 -0400

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 12:04:34 -0400

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Mon, 8 Sep 2014 12:19:47 -0400

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 17:22:36 +0000

Re: tinning wires - flux entrapment and long term reliability

Yuan-chia Joyce Koo

Mon, 8 Sep 2014 13:37:09 -0400

Re: tinning wires - flux entrapment and long term reliability

Wenger, George M. [Contractor]

Mon, 8 Sep 2014 13:00:48 -0500

Re: tinning wires - flux entrapment and long term reliability

Douglas Pauls

Mon, 8 Sep 2014 13:46:53 -0500

Re: tinning wires - flux entrapment and long term reliability

Steve Gregory

Mon, 8 Sep 2014 13:19:11 -0600

Re: tinning wires - flux entrapment and long term reliability

Steve Gregory

Mon, 8 Sep 2014 14:44:22 -0600

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 21:04:19 +0000

Re: tinning wires - flux entrapment and long term reliability

Douglas Pauls

Mon, 8 Sep 2014 16:05:05 -0500

Re: tinning wires - flux entrapment and long term reliability

Stadem, Richard D.

Mon, 8 Sep 2014 21:08:06 +0000

Re: tinning wires - flux entrapment and long term reliability

Nutting, Phil

Wed, 10 Sep 2014 13:18:15 +0000

Re: tinning wires - flux entrapment and long term reliability

Nutting, Phil

Wed, 10 Sep 2014 14:09:18 +0000

Re: tinning wires - flux entrapment and long term reliability

Robert Kondner

Wed, 10 Sep 2014 10:57:33 -0400

Re: tinning wires - flux entrapment and long term reliability

Nutting, Phil

Wed, 10 Sep 2014 15:04:05 +0000

Re: tinning wires - flux entrapment and long term reliability

Victor Hernandez

Wed, 10 Sep 2014 10:07:10 -0500

TM 650 Max misregistration measurement, 2.2.11

Victor Hernandez

Tue, 16 Sep 2014 11:26:40 -0500

Re: TM 650 Max misregistration measurement, 2.2.11

Douglas Pauls

Tue, 16 Sep 2014 11:48:32 -0500

Re: TM 650 Max misregistration measurement, 2.2.11

Bush, Brien

Tue, 16 Sep 2014 16:53:09 +0000

Re: TM 650 Max misregistration measurement, 2.2.11

Victor Hernandez

Tue, 16 Sep 2014 12:16:50 -0500

URL link to upload attachment

Victor Hernandez

Wed, 17 Sep 2014 08:20:32 -0500

Re: URL link to upload attachment

Ed Popielarski

Wed, 17 Sep 2014 15:27:39 +0000

[TN] DIMM Socket press-fit Misalignment

Victor Hernandez

Wed, 24 Sep 2014 12:34:15 -0500

Wayne Thayer

Mon, 29 Sep 2014 11:35:25 +0000

Tan Geok Ang

Tue, 30 Sep 2014 03:12:19 +0000

Victor Hernandez

Tue, 30 Sep 2014 05:39:32 -0500

Wayne Thayer

Tue, 30 Sep 2014 13:19:30 +0000

Guy Ramsey

Tue, 30 Sep 2014 09:37:50 -0400

Tan Geok Ang

Wed, 1 Oct 2014 02:44:18 +0000