TECHNET Archives

December 2013

TechNet@IPC.ORG
Options: Hide Table of Contents

Ahmad, Syed (3 Messages)
Bernard (2 Messages)
Bev Christian (1 Message)
Bhanu Sood (3 Messages)
Bob Landman (3 Messages)
Brian Ellis (1 Message)
Brian (1 Message)
Bush, Brien (1 Message)
Chris Mahanna (2 Messages)
Chuck Brummer (4 Messages)
Cooke, Robert W. (JSC-NA)[SAIC] (1 Message)
David D. Hillman (23 Messages)
Dennis Fritz (1 Message)
Dick Hatano (1 Message)
Diljit Matharu (1 Message)
Don Vischulis (5 Messages)
Donald Vischulis (1 Message)
Douglas Pauls (8 Messages)
Drew meyer (1 Message)
Dwight Mattix (4 Messages)
Ed Hare (1 Message)
Ed Popielarski (2 Messages)
Gerry Gagnon (8 Messages)
Glidden, Kevin (3 Messages)
Graham Collins (1 Message)
Greg Munie (3 Messages)
Grunde Gjertsen (2 Messages)
Guy Ramsey (2 Messages)
harvey (2 Messages)
Heidi Havelka (1 Message)
James Head (1 Message)
Jason Zhao (1 Message)
Joyce Koo (20 Messages)
jrusseau.precisionanalysts.com (1 Message)
Larry Dzaugis (7 Messages)
Laura J Turbini (1 Message)
lduso - Diamond-MT.com (1 Message)
Lee Hitchens (2 Messages)
Leland Woodall (3 Messages)
[log in to unmask] (1 Message)
Louis Hart (1 Message)
Lyon Yuan (2 Messages)
MacFadden, Todd (1 Message)
MaryJane Chism (2 Messages)
Matthias Mansfeld (1 Message)
Mike Fenner (3 Messages)
Mordechai Kirshenbaum (1 Message)
Nigel Burtt (1 Message)
Nutting, Phil (1 Message)
Patrick Goodyear (2 Messages)
Paul Reid (19 Messages)
Pete (2 Messages)
Phil Bavaro (5 Messages)
Ramakrishnan Saravanan (1 Message)
Reuven Rokah (20 Messages)
Rivera, Raye (4 Messages)
Robert e. welch (2 Messages)
Robert Kondner (1 Message)
Robert Wolfe (1 Message)
Ron Feyereisen (1 Message)
Rueda, Ernesto (4 Messages)
SALA GABRIELE (1 Message)
Stadem, Richard D. (25 Messages)
Steve Gregory (9 Messages)
Steve Mikell (1 Message)
Sue Knight (1 Message)
Theodore J Tontis (4 Messages)
Vargas, Stephen M (1 Message)
Victor Hernandez (4 Messages)
Vladimir Igoshev. PhD (7 Messages)
Vladimir (1 Message)
Wayne Thayer (9 Messages)
Wenger, George M. [Contractor] (9 Messages)
Whittaker, Dewey (EHCOE) (7 Messages)
Zilber Gil (4 Messages)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender Ahmad, Syed
Re: Crazing
Ahmad, Syed
Mon, 9 Dec 2013 16:37:00 +0000
Re: Crazing - the pictures
Ahmad, Syed
Tue, 17 Dec 2013 19:58:55 +0000
Re: super fine score cuts
Ahmad, Syed
Tue, 31 Dec 2013 14:52:09 +0000
New Sender Bernard
Re: IPC-6012C Total Cu thickness
Bernard
Wed, 11 Dec 2013 12:37:53 -0800
Re: IPC-6012C Total Cu thickness
Bernard
Wed, 11 Dec 2013 17:19:17 -0800
New Sender Bev Christian
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Bev Christian
Fri, 20 Dec 2013 18:34:22 -0500
New Sender Bhanu Sood
Re: Crazing
Bhanu Sood
Mon, 9 Dec 2013 13:54:45 -0500
Re: Crazing
Bhanu Sood
Mon, 9 Dec 2013 16:34:53 -0500
Re: Crazing
Bhanu Sood
Tue, 10 Dec 2013 12:40:13 -0500
New Sender Bob Landman
Re: High Temperature Solder Migration/Creep
Bob Landman
Thu, 19 Dec 2013 13:27:55 -0500
Re: RF Shield sources for PWAs
Bob Landman
Wed, 11 Dec 2013 17:11:36 -0500
Re: RF Shield sources for PWAs
Bob Landman
Wed, 11 Dec 2013 17:16:40 -0500
New Sender Brian Ellis
Re: NTC Friday Element Quiz Question
Brian Ellis
Fri, 6 Dec 2013 16:37:45 +0200
New Sender Brian
Re: NTC Friday Element Quiz Question
Brian
Fri, 20 Dec 2013 12:52:02 +0200
New Sender Bush, Brien
Re: Pneumatic Board Support Tooling for Solder paste printers - Bayesian Filter detected spam
Bush, Brien
Thu, 12 Dec 2013 08:46:11 -0500
New Sender Chris Mahanna
High Temperature Solder Migration/Creep
Chris Mahanna
Tue, 17 Dec 2013 22:14:46 +0000
Re: High Temperature Solder Migration/Creep
Chris Mahanna
Thu, 19 Dec 2013 17:39:52 +0000
New Sender Chuck Brummer
Re: Crazing
Chuck Brummer
Mon, 9 Dec 2013 11:28:35 -0800
Re: Crazing - the pictures
Chuck Brummer
Mon, 16 Dec 2013 10:02:14 -0800
Re: Crazing - the pictures
Chuck Brummer
Mon, 16 Dec 2013 10:04:30 -0800
Re: NTC Friday Element Quiz Question
Chuck Brummer
Thu, 19 Dec 2013 15:10:17 -0800
New Sender Cooke, Robert W. (JSC-NA)[SAIC]
Re: Press Fit
Cooke, Robert W. (JSC-NA)[SAIC]
Tue, 3 Dec 2013 18:38:08 +0000
New Sender David D. Hillman
Re: High Temperature Solder Migration/Creep
David D. Hillman
Tue, 17 Dec 2013 16:26:43 -0600
Re: High Temperature Solder Migration/Creep
David D. Hillman
Thu, 19 Dec 2013 15:22:18 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Fri, 20 Dec 2013 06:36:02 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Fri, 20 Dec 2013 07:04:36 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Fri, 20 Dec 2013 10:38:09 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Fri, 20 Dec 2013 13:37:10 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Fri, 20 Dec 2013 14:03:51 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Tue, 24 Dec 2013 10:05:42 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Tue, 24 Dec 2013 10:59:23 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
David D. Hillman
Mon, 30 Dec 2013 12:07:15 -0600
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 6 Dec 2013 12:55:52 -0600
Re: NTC Friday Element Quiz Answer
David D. Hillman
Fri, 6 Dec 2013 16:00:39 -0600
Re: NTC Friday Element Quiz Answer
David D. Hillman
Fri, 6 Dec 2013 16:09:04 -0600
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 13 Dec 2013 13:01:38 -0600
NTC Friday Element Quiz Answer and Holiday Wishes
David D. Hillman
Fri, 20 Dec 2013 07:24:32 -0600
NTC Friday Element Quiz Question
David D. Hillman
Fri, 6 Dec 2013 08:11:58 -0600
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 6 Dec 2013 09:20:06 -0600
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 13 Dec 2013 08:36:52 -0600
NTC Friday Element Quiz Question
David D. Hillman
Fri, 13 Dec 2013 09:03:50 -0600
NTC Friday Element Quiz Question
David D. Hillman
Thu, 19 Dec 2013 16:08:50 -0600
Re: NTC Friday Element Quiz Question
David D. Hillman
Fri, 20 Dec 2013 07:18:02 -0600
NTC Friday Element Quiz Question Notice
David D. Hillman
Thu, 19 Dec 2013 07:05:47 -0600
Re: Press Fit
David D. Hillman
Tue, 3 Dec 2013 11:32:22 -0600
New Sender Dennis Fritz
Re: IPC-6012C Total Cu thickness
Dennis Fritz
Thu, 12 Dec 2013 10:17:22 -0500
New Sender Dick Hatano
Re: RF Shield sources for PWAs
Dick Hatano
Wed, 11 Dec 2013 21:44:56 +0000
New Sender Diljit Matharu
Re: Moisture Level Determination of PCB
Diljit Matharu
Tue, 10 Dec 2013 17:36:45 +0000
New Sender Don Vischulis
Re: Crazing
Don Vischulis
Fri, 6 Dec 2013 08:03:07 -0700
Re: Crazing - the pictures
Don Vischulis
Fri, 13 Dec 2013 12:26:30 -0600
Re: IPC-6012C Total Cu thickness
Don Vischulis
Thu, 12 Dec 2013 06:13:26 -0600
Re: NTC Friday Element Quiz Question
Don Vischulis
Fri, 6 Dec 2013 07:39:52 -0700
Re: NTC Friday Element Quiz Question
Don Vischulis
Fri, 13 Dec 2013 08:29:41 -0600
New Sender Donald Vischulis
Re: NTC Friday Element Quiz Answer
Donald Vischulis
Fri, 6 Dec 2013 15:07:01 -0600
New Sender Douglas Pauls
Re: NTC Friday Element Quiz Answer
Douglas Pauls
Mon, 2 Dec 2013 08:42:13 -0600
Re: NTC Friday Element Quiz Answer
Douglas Pauls
Fri, 6 Dec 2013 13:27:00 -0600
Re: NTC Friday Element Quiz Answer
Douglas Pauls
Mon, 9 Dec 2013 07:35:45 -0600
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 6 Dec 2013 08:56:40 -0600
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 6 Dec 2013 09:22:58 -0600
Re: NTC Friday Element Quiz Question
Douglas Pauls
Fri, 6 Dec 2013 09:27:06 -0600
Re: Press fitting Molex Micro-fit connectors through conformal coating...
Douglas Pauls
Wed, 11 Dec 2013 13:23:09 -0600
Re: Press fitting Molex Micro-fit connectors through conformal coating...
Douglas Pauls
Thu, 12 Dec 2013 07:22:12 -0600
New Sender Drew meyer
Re: NTC Friday Element Quiz Question
Drew meyer
Fri, 6 Dec 2013 08:18:47 -0600
New Sender Dwight Mattix
Re: Crazing
Dwight Mattix
Tue, 17 Dec 2013 10:04:54 -0800
Re: Press Fit Connector Drill size/finish size
Dwight Mattix
Mon, 2 Dec 2013 10:31:47 -0800
Re: Press Fit Connector Drill size/finish size
Dwight Mattix
Mon, 2 Dec 2013 10:32:39 -0800
Re: Press Fit Connector Drill size/finish size
Dwight Mattix
Mon, 2 Dec 2013 10:34:06 -0800
New Sender Ed Hare
Re: Crazing
Ed Hare
Thu, 5 Dec 2013 13:32:10 -0800
New Sender Ed Popielarski
Re: NTC Friday Element Quiz Answer
Ed Popielarski
Fri, 6 Dec 2013 19:55:42 +0000
Re: NTC Friday Element Quiz Question
Ed Popielarski
Fri, 6 Dec 2013 15:49:42 +0000
New Sender Gerry Gagnon
Re: Crazing
Gerry Gagnon
Fri, 6 Dec 2013 08:20:37 -0500
Re: Crazing
Gerry Gagnon
Fri, 6 Dec 2013 10:44:22 -0500
Re: Crazing
Gerry Gagnon
Fri, 13 Dec 2013 20:48:50 -0500
Re: Crazing
Gerry Gagnon
Thu, 19 Dec 2013 02:28:05 -0500
Re: IPC-6012C Total Cu thickness
Gerry Gagnon
Fri, 13 Dec 2013 20:10:21 -0500
Re: Press Fit
Gerry Gagnon
Tue, 3 Dec 2013 13:38:49 -0500
Re: Press Fit
Gerry Gagnon
Tue, 3 Dec 2013 14:40:24 -0500
Re: Press Fit
Gerry Gagnon
Tue, 3 Dec 2013 16:05:27 -0500
New Sender Glidden, Kevin
Re: Press Fit
Glidden, Kevin
Tue, 3 Dec 2013 16:00:55 +0000
Re: Press Fit
Glidden, Kevin
Tue, 3 Dec 2013 19:49:56 +0000
Re: Press Fit
Glidden, Kevin
Tue, 3 Dec 2013 20:14:22 +0000
New Sender Graham Collins
Re: NTC Friday Element Quiz Question
Graham Collins
Fri, 20 Dec 2013 09:27:21 -0400
New Sender Greg Munie
Re: NTC Friday Element Quiz Answer
Greg Munie
Fri, 13 Dec 2013 19:02:06 +0000
Re: NTC Friday Element Quiz Question
Greg Munie
Fri, 13 Dec 2013 15:12:04 +0000
Re: NTC Friday Element Quiz Question
Greg Munie
Fri, 20 Dec 2013 02:13:26 +0000
New Sender Grunde Gjertsen
Re: IPC-6012C Total Cu thickness
Grunde Gjertsen
Wed, 11 Dec 2013 20:23:27 +0000
Re: Moisture Level Determination of PCB
Grunde Gjertsen
Tue, 10 Dec 2013 23:23:28 +0000
New Sender Guy Ramsey
super fine score cuts
Guy Ramsey
Tue, 31 Dec 2013 08:30:48 -0500
Re: super fine score cuts
Guy Ramsey
Tue, 31 Dec 2013 09:37:01 -0500
New Sender harvey
Re: High Temperature Solder Migration/Creep
harvey
Tue, 17 Dec 2013 21:54:24 -0800
Fw: [TN] IPC-A-610E, Voids in Thermal exposed pad of QFNs
harvey
Mon, 23 Dec 2013 09:21:47 -0800
New Sender Heidi Havelka
Re: NTC Friday Element Quiz Question
Heidi Havelka
Fri, 6 Dec 2013 09:48:01 -0500
New Sender James Head
Re: NTC Friday Element Quiz Answer
James Head
Mon, 9 Dec 2013 14:01:52 +0000
New Sender Jason Zhao
Re: IPC-6012C Total Cu thickness
Jason Zhao
Tue, 10 Dec 2013 18:38:11 -0600
New Sender Joyce Koo
Re: Crazing
Joyce Koo
Thu, 5 Dec 2013 21:57:52 +0000
Re: Crazing
Joyce Koo
Mon, 9 Dec 2013 15:35:20 +0000
Re: Crazing
Joyce Koo
Mon, 9 Dec 2013 16:20:58 +0000
Re: High Temperature Solder Migration/Creep
Joyce Koo
Wed, 18 Dec 2013 11:23:40 +0000
Re: High Temperature Solder Migration/Creep
Joyce Koo
Wed, 18 Dec 2013 11:35:56 +0000
Re: High Temperature Solder Migration/Creep
Joyce Koo
Thu, 19 Dec 2013 18:23:26 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Fri, 20 Dec 2013 12:45:53 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Fri, 20 Dec 2013 16:18:02 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Fri, 20 Dec 2013 16:44:02 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Fri, 20 Dec 2013 23:37:02 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Mon, 23 Dec 2013 17:30:14 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Thu, 26 Dec 2013 15:14:17 +0000
Re: Moisture Level Determination of PCB
Joyce Koo
Tue, 10 Dec 2013 19:18:42 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 17:49:04 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 19:02:50 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 19:04:38 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 19:45:13 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 20:04:02 +0000
Re: Press Fit
Joyce Koo
Tue, 3 Dec 2013 21:18:00 +0000
Re: Fw: [TN] IPC-A-610E, Voids in Thermal exposed pad of QFNs
Joyce Koo
Mon, 23 Dec 2013 18:21:00 +0000
New Sender jrusseau.precisionanalysts.com
Re: NTC Friday Element Quiz Question
jrusseau.precisionanalysts.com
Thu, 19 Dec 2013 17:31:52 -0500
New Sender Larry Dzaugis
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Larry Dzaugis
Sat, 21 Dec 2013 07:46:18 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Larry Dzaugis
Sat, 21 Dec 2013 09:09:53 -0600
Re: Moisture Level Determination of PCB
Larry Dzaugis
Thu, 12 Dec 2013 12:54:45 -0600
Re: Moisture Level Determination of PCB
Larry Dzaugis
Thu, 12 Dec 2013 16:40:20 -0600
Re: NTC Friday Element Quiz Answer and Holiday Wishes
Larry Dzaugis
Sat, 21 Dec 2013 09:35:07 -0600
Re: NTC Friday Element Quiz Question
Larry Dzaugis
Thu, 19 Dec 2013 16:15:21 -0600
Re: Pneumatic Board Support Tooling for Solder paste printers - Bayesian Filter detected spam
Larry Dzaugis
Thu, 12 Dec 2013 12:20:20 -0600
New Sender Laura J Turbini
Re: Crazing - the pictures
Laura J Turbini
Tue, 17 Dec 2013 14:42:52 -0500
New Sender lduso - Diamond-MT.com
Re: Press fitting Molex Micro-fit connectors through conformal coating...
lduso - Diamond-MT.com
Wed, 11 Dec 2013 14:54:28 -0500
New Sender Lee Hitchens
Re: Press fitting Molex Micro-fit connectors through conformal coating...
Lee Hitchens
Thu, 12 Dec 2013 01:06:30 +0000
Re: Press fitting Molex Micro-fit connectors through conformal coating...
Lee Hitchens
Fri, 13 Dec 2013 08:54:38 +0800
New Sender Leland Woodall
Re: Crazing
Leland Woodall
Tue, 10 Dec 2013 15:38:05 +0000
Re: Moisture Level Determination of PCB
Leland Woodall
Tue, 10 Dec 2013 17:51:52 +0000
Re: NTC Friday Element Quiz Question
Leland Woodall
Fri, 13 Dec 2013 15:21:55 +0000
New Sender [log in to unmask]
Re: Crazing
[log in to unmask]
Mon, 9 Dec 2013 21:11:34 +0000
New Sender Louis Hart
Re: IPC-6012C Total Cu thickness
Louis Hart
Wed, 11 Dec 2013 14:21:25 +0000
New Sender Lyon Yuan
solder can not be extended on test point of OSP board
Lyon Yuan
Sun, 8 Dec 2013 09:39:54 +0800
Re: solder can not be extended on test point of OSP board
Lyon Yuan
Sun, 8 Dec 2013 10:05:56 +0800
New Sender MacFadden, Todd
Re: IPC-6012C Total Cu thickness
MacFadden, Todd
Wed, 11 Dec 2013 14:48:36 +0000
New Sender MaryJane Chism
Moisture Level Determination of PCB
MaryJane Chism
Tue, 10 Dec 2013 12:20:30 -0500
PCB Moisture Level
MaryJane Chism
Tue, 17 Dec 2013 08:30:04 -0500
New Sender Matthias Mansfeld
Re: NTC Friday Element Quiz Question
Matthias Mansfeld
Fri, 6 Dec 2013 19:15:41 +0100
New Sender Mike Fenner
Re: High Temperature Solder Migration/Creep
Mike Fenner
Wed, 18 Dec 2013 10:43:42 +0000
Re: Press Fit
Mike Fenner
Tue, 3 Dec 2013 17:07:32 +0000
Re: Press Fit
Mike Fenner
Wed, 4 Dec 2013 09:39:27 +0000
New Sender Mordechai Kirshenbaum
Re: NTC Friday Element Quiz Question
Mordechai Kirshenbaum
Fri, 20 Dec 2013 03:24:41 -0800
New Sender Nigel Burtt
Re: NTC Friday Element Quiz Question
Nigel Burtt
Fri, 20 Dec 2013 02:40:56 -0600
New Sender Nutting, Phil
Re: Through-hole rework station...
Nutting, Phil
Fri, 13 Dec 2013 22:22:44 +0000
New Sender Patrick Goodyear
Re: NTC Friday Element Quiz Question
Patrick Goodyear
Fri, 20 Dec 2013 02:00:23 -0500
Re: Through-hole rework station...
Patrick Goodyear
Sat, 14 Dec 2013 01:30:30 -0500
New Sender Paul Reid
Crazing
Paul Reid
Thu, 5 Dec 2013 16:05:41 -0500
Re: Crazing
Paul Reid
Fri, 6 Dec 2013 08:26:12 -0500
Re: Crazing
Paul Reid
Fri, 6 Dec 2013 08:32:37 -0500
Re: Crazing
Paul Reid
Fri, 6 Dec 2013 10:10:38 -0500
Re: Crazing
Paul Reid
Fri, 6 Dec 2013 11:07:51 -0500
Re: Crazing
Paul Reid
Mon, 9 Dec 2013 10:58:14 -0500
Re: Crazing
Paul Reid
Tue, 10 Dec 2013 11:11:29 -0500
Re: Crazing
Paul Reid
Tue, 10 Dec 2013 11:19:37 -0500
Re: Crazing
Paul Reid
Tue, 10 Dec 2013 11:25:05 -0500
Re: Crazing
Paul Reid
Tue, 10 Dec 2013 11:30:03 -0500
Re: Crazing
Paul Reid
Tue, 17 Dec 2013 10:03:25 -0500
Re: Crazing
Paul Reid
Tue, 17 Dec 2013 13:31:10 -0500
Re: Crazing
Paul Reid
Thu, 19 Dec 2013 08:47:18 -0500
Crazing - the pictures
Paul Reid
Fri, 13 Dec 2013 12:49:01 -0500
Re: Crazing - the pictures
Paul Reid
Fri, 13 Dec 2013 16:04:57 -0500
Re: Crazing - the pictures
Paul Reid
Fri, 13 Dec 2013 16:09:10 -0500
Re: Crazing - the pictures
Paul Reid
Tue, 17 Dec 2013 09:09:44 -0500
Re: Crazing - the pictures
Paul Reid
Tue, 17 Dec 2013 09:31:56 -0500
Re: Separation between the BGA solder ball and pad on the PCB
Paul Reid
Mon, 2 Dec 2013 09:31:13 -0500
New Sender Pete
Re: Crazing
Pete
Tue, 10 Dec 2013 08:41:48 -0600
Re: IPC-6012C Total Cu thickness
Pete
Thu, 12 Dec 2013 08:37:24 -0600
New Sender Phil Bavaro
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Phil Bavaro
Fri, 20 Dec 2013 17:26:23 +0000
NTC RE: [TN] IPC-6012C Total Cu thickness
Phil Bavaro
Thu, 12 Dec 2013 16:20:08 +0000
RF Shield sources for PWAs
Phil Bavaro
Wed, 11 Dec 2013 21:28:07 +0000
Re: RF Shield sources for PWAs
Phil Bavaro
Wed, 11 Dec 2013 23:50:53 +0000
Re: super fine score cuts
Phil Bavaro
Tue, 31 Dec 2013 17:25:46 +0000
New Sender Ramakrishnan Saravanan
Difference between HATS & IST
Ramakrishnan Saravanan
Tue, 17 Dec 2013 08:35:31 -0600
New Sender Reuven Rokah
Re: IPC-6012C Total Cu thickness
Reuven Rokah
Wed, 11 Dec 2013 07:59:49 +0200
Re: IPC-6012C Total Cu thickness
Reuven Rokah
Wed, 11 Dec 2013 22:05:41 +0200
IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Fri, 20 Dec 2013 08:45:14 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Fri, 20 Dec 2013 18:18:07 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Fri, 20 Dec 2013 20:27:02 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Fri, 20 Dec 2013 21:51:05 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Fri, 20 Dec 2013 22:22:57 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Sat, 21 Dec 2013 09:03:32 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Mon, 23 Dec 2013 18:03:53 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Tue, 24 Dec 2013 19:29:22 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Tue, 24 Dec 2013 19:42:55 +0200
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Reuven Rokah
Thu, 26 Dec 2013 20:24:10 +0200
Re: Moisture Level Determination of PCB
Reuven Rokah
Tue, 10 Dec 2013 20:11:21 +0200
Re: Moisture Level Determination of PCB
Reuven Rokah
Tue, 10 Dec 2013 21:33:15 +0200
Re: Press Fit
Reuven Rokah
Tue, 3 Dec 2013 17:54:50 +0200
Re: Press Fit
Reuven Rokah
Tue, 3 Dec 2013 19:56:39 +0200
Re: Press Fit Connector Drill size/finish size
Reuven Rokah
Mon, 2 Dec 2013 13:22:47 +0200
Re: Press Fit Connector Drill size/finish size
Reuven Rokah
Mon, 2 Dec 2013 16:08:58 +0200
Re: Press Fit Connector Drill size/finish size
Reuven Rokah
Mon, 2 Dec 2013 16:41:49 +0200
Re: Press Fit Connector Drill size/finish size
Reuven Rokah
Mon, 2 Dec 2013 18:44:03 +0200
New Sender Rivera, Raye
IPC-6012C Total Cu thickness
Rivera, Raye
Tue, 10 Dec 2013 09:13:19 -0800
Re: IPC-6012C Total Cu thickness
Rivera, Raye
Wed, 11 Dec 2013 08:58:49 -0800
Re: IPC-6012C Total Cu thickness
Rivera, Raye
Wed, 11 Dec 2013 16:48:41 -0800
Re: NTC Friday Element Quiz Question
Rivera, Raye
Fri, 6 Dec 2013 08:38:37 -0800
New Sender Robert e. welch
Re: NTC Friday Element Quiz Question
Robert e. welch
Fri, 6 Dec 2013 15:10:06 +0000
Re: NTC Friday Element Quiz Question
Robert e. welch
Thu, 19 Dec 2013 22:36:53 +0000
New Sender Robert Kondner
Re: NTC Friday Element Quiz Question
Robert Kondner
Fri, 6 Dec 2013 09:32:54 -0500
New Sender Robert Wolfe
Re: NTC Friday Element Quiz Question
Robert Wolfe
Thu, 19 Dec 2013 17:18:23 -0500
New Sender Ron Feyereisen
Re: RF Shield sources for PWAs
Ron Feyereisen
Wed, 11 Dec 2013 21:43:08 +0000
New Sender Rueda, Ernesto
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Rueda, Ernesto
Thu, 26 Dec 2013 08:26:18 -0800
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Rueda, Ernesto
Thu, 26 Dec 2013 10:49:00 -0800
Pneumatic Board Support Tooling for Solder paste printers
Rueda, Ernesto
Wed, 11 Dec 2013 17:02:32 -0800
Re: Pneumatic Board Support Tooling for Solder paste printers - Bayesian Filter detected spam
Rueda, Ernesto
Thu, 12 Dec 2013 11:22:44 -0800
New Sender SALA GABRIELE
R: [TN] IPC-A-610E, Voids in Thermal exposed pad of QFNs
SALA GABRIELE
Mon, 23 Dec 2013 19:33:52 +0100
New Sender Stadem, Richard D.
Re: Crazing
Stadem, Richard D.
Mon, 9 Dec 2013 12:52:28 +0000
Re: Crazing
Stadem, Richard D.
Mon, 9 Dec 2013 17:08:16 +0000
Re: IPC-6012C Total Cu thickness
Stadem, Richard D.
Thu, 12 Dec 2013 14:52:37 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Mon, 23 Dec 2013 15:30:16 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Mon, 23 Dec 2013 17:04:59 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Tue, 24 Dec 2013 16:53:01 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Tue, 24 Dec 2013 17:08:31 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Thu, 26 Dec 2013 14:01:07 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Thu, 26 Dec 2013 16:45:51 +0000
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Stadem, Richard D.
Thu, 26 Dec 2013 19:57:09 +0000
Re: Moisture Level Determination of PCB
Stadem, Richard D.
Tue, 10 Dec 2013 18:50:36 +0000
Re: Moisture Level Determination of PCB
Stadem, Richard D.
Tue, 10 Dec 2013 19:20:14 +0000
Re: Moisture Level Determination of PCB
Stadem, Richard D.
Wed, 11 Dec 2013 13:32:19 +0000
Re: Moisture Level Determination of PCB
Stadem, Richard D.
Wed, 11 Dec 2013 14:49:42 +0000
Re: Moisture Level Determination of PCB
Stadem, Richard D.
Thu, 12 Dec 2013 20:29:52 +0000
Re: NTC Friday Element Quiz Answer
Stadem, Richard D.
Mon, 9 Dec 2013 13:51:50 +0000
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Fri, 13 Dec 2013 15:14:23 +0000
Re: NTC Friday Element Quiz Question
Stadem, Richard D.
Fri, 13 Dec 2013 15:25:29 +0000
Re: Press Fit
Stadem, Richard D.
Tue, 3 Dec 2013 15:56:53 +0000
Re: Separation between the BGA sodler ball and pad on the PCB
Stadem, Richard D.
Mon, 2 Dec 2013 16:54:59 +0000
Re: super fine score cuts
Stadem, Richard D.
Tue, 31 Dec 2013 13:50:07 +0000
Re: super fine score cuts
Stadem, Richard D.
Tue, 31 Dec 2013 13:57:29 +0000
Re: super fine score cuts
Stadem, Richard D.
Tue, 31 Dec 2013 16:18:01 +0000
Re: super fine score cuts
Stadem, Richard D.
Tue, 31 Dec 2013 16:20:38 +0000
Re: super fine score cuts
Stadem, Richard D.
Tue, 31 Dec 2013 16:23:26 +0000
New Sender Steve Gregory
Re: Moisture Level Determination of PCB
Steve Gregory
Wed, 11 Dec 2013 06:59:34 -0700
Re: NTC Friday Element Quiz Question
Steve Gregory
Fri, 6 Dec 2013 07:31:27 -0700
Re: NTC Friday Element Quiz Question
Steve Gregory
Fri, 6 Dec 2013 08:57:42 -0700
Re: Press Fit
Steve Gregory
Tue, 3 Dec 2013 09:18:15 -0700
Re: Press Fit
Steve Gregory
Tue, 3 Dec 2013 11:18:43 -0700
Press fitting Molex Micro-fit connectors through conformal coating...
Steve Gregory
Wed, 11 Dec 2013 11:46:28 -0700
Re: super fine score cuts
Steve Gregory
Tue, 31 Dec 2013 07:59:47 -0700
Through-hole rework station...
Steve Gregory
Fri, 13 Dec 2013 10:00:30 -0700
Re: Through-hole rework station...
Steve Gregory
Fri, 13 Dec 2013 15:38:13 -0700
New Sender Steve Mikell
Re: NTC Friday Element Quiz Question
Steve Mikell
Thu, 19 Dec 2013 17:20:21 -0500
New Sender Sue Knight
Re: NTC Friday Element Quiz Question
Sue Knight
Fri, 6 Dec 2013 16:01:18 +0000
New Sender Theodore J Tontis
Re: Crazing
Theodore J Tontis
Mon, 9 Dec 2013 14:41:47 +0000
Re: Crazing
Theodore J Tontis
Mon, 9 Dec 2013 16:22:40 +0000
Re: Crazing
Theodore J Tontis
Mon, 9 Dec 2013 18:48:38 +0000
Re: RF Shield sources for PWAs
Theodore J Tontis
Wed, 11 Dec 2013 21:39:39 +0000
New Sender Vargas, Stephen M
Press Fit
Vargas, Stephen M
Tue, 3 Dec 2013 15:36:19 +0000
New Sender Victor Hernandez
Re: Crazing
Victor Hernandez
Tue, 10 Dec 2013 09:13:53 -0600
Re: Moisture Level Determination of PCB
Victor Hernandez
Wed, 11 Dec 2013 05:43:41 -0600
Re: Separation between the BGA sodler ball and pad on the PCB
Victor Hernandez
Mon, 2 Dec 2013 05:48:32 -0600
Re: Separation between the BGA solder ball and pad on the PCB
Victor Hernandez
Mon, 2 Dec 2013 05:53:50 -0600
New Sender Vladimir Igoshev. PhD
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Vladimir Igoshev. PhD
Tue, 24 Dec 2013 12:34:37 -0500
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Vladimir Igoshev. PhD
Thu, 26 Dec 2013 09:22:12 -0500
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Vladimir Igoshev. PhD
Thu, 26 Dec 2013 13:18:21 -0500
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Vladimir Igoshev. PhD
Thu, 26 Dec 2013 15:30:19 -0500
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Vladimir Igoshev. PhD
Mon, 30 Dec 2013 13:50:24 -0500
Re: Separation between the BGA sodler ball and pad on the PCB
Vladimir Igoshev. PhD
Tue, 3 Dec 2013 17:24:50 -0500
Re: Separation between the BGA solder ball and pad on the PCB
Vladimir Igoshev. PhD
Tue, 3 Dec 2013 17:17:27 -0500
New Sender Vladimir
Re: High Temperature Solder Migration/Creep
Vladimir
Tue, 17 Dec 2013 22:21:27 +0000
New Sender Wayne Thayer
Re: Crazing
Wayne Thayer
Fri, 6 Dec 2013 16:43:05 +0000
Re: Crazing - the pictures
Wayne Thayer
Fri, 13 Dec 2013 18:13:05 +0000
Re: Crazing - the pictures
Wayne Thayer
Fri, 13 Dec 2013 19:16:46 +0000
Re: High Temperature Solder Migration/Creep
Wayne Thayer
Wed, 18 Dec 2013 14:21:56 +0000
Re: High Temperature Solder Migration/Creep
Wayne Thayer
Thu, 19 Dec 2013 18:52:54 +0000
Re: Press Fit Connector Drill size/finish size
Wayne Thayer
Mon, 2 Dec 2013 18:37:48 +0000
Re: Press fitting Molex Micro-fit connectors through conformal coating...
Wayne Thayer
Wed, 11 Dec 2013 18:59:04 +0000
Re: Separation between the BGA sodler ball and pad on the PCB
Wayne Thayer
Mon, 2 Dec 2013 18:30:20 +0000
Re: super fine score cuts
Wayne Thayer
Tue, 31 Dec 2013 14:41:34 +0000
New Sender Wenger, George M. [Contractor]
Re: High Temperature Solder Migration/Creep
Wenger, George M. [Contractor]
Tue, 17 Dec 2013 16:28:35 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Wenger, George M. [Contractor]
Tue, 24 Dec 2013 10:40:56 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Wenger, George M. [Contractor]
Tue, 24 Dec 2013 11:20:12 -0600
Re: IPC-A-610E, Voids in Thermal exposed pad of QFNs
Wenger, George M. [Contractor]
Thu, 26 Dec 2013 08:57:32 -0600
Re: Separation between the BGA sodler ball and pad on the PCB
Wenger, George M. [Contractor]
Mon, 2 Dec 2013 08:08:58 -0600
Re: Separation between the BGA sodler ball and pad on the PCB
Wenger, George M. [Contractor]
Tue, 3 Dec 2013 16:30:37 -0600
Re: Separation between the BGA solder ball and pad on the PCB
Wenger, George M. [Contractor]
Mon, 2 Dec 2013 08:00:47 -0600
Re: solder can not be extended on test point of OSP board
Wenger, George M. [Contractor]
Sat, 7 Dec 2013 19:53:29 -0600
Re: solder can not be extended on test point of OSP board
Wenger, George M. [Contractor]
Sat, 7 Dec 2013 20:35:26 -0600
New Sender Whittaker, Dewey (EHCOE)
Re: Crazing
Whittaker, Dewey (EHCOE)
Mon, 9 Dec 2013 17:16:17 +0000
Re: IPC-6012C Total Cu thickness
Whittaker, Dewey (EHCOE)
Thu, 12 Dec 2013 14:39:49 +0000
Re: IPC-6012C Total Cu thickness
Whittaker, Dewey (EHCOE)
Thu, 12 Dec 2013 15:04:41 +0000
Re: Moisture Level Determination of PCB
Whittaker, Dewey (EHCOE)
Wed, 11 Dec 2013 15:28:56 +0000
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Mon, 2 Dec 2013 14:16:47 +0000
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Mon, 2 Dec 2013 15:36:30 +0000
Re: NTC Friday Element Quiz Answer
Whittaker, Dewey (EHCOE)
Mon, 9 Dec 2013 14:16:09 +0000
New Sender Zilber Gil
Press Fit Connector Drill size/finish size
Zilber Gil
Mon, 2 Dec 2013 11:01:01 +0000
Re: Press Fit Connector Drill size/finish size
Zilber Gil
Mon, 2 Dec 2013 12:14:03 +0000
Re: Press Fit Connector Drill size/finish size
Zilber Gil
Mon, 2 Dec 2013 14:28:14 +0000
Re: Press Fit Connector Drill size/finish size
Zilber Gil
Mon, 2 Dec 2013 16:13:13 +0000

ATOM RSS1 RSS2