LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

Goodyear, Patrick

Mon, 27 Feb 2012 17:52:08 +0000

Larry Dzaugis

Fri, 24 Feb 2012 14:03:28 -0600

Stadem, Richard D.

Fri, 24 Feb 2012 12:06:17 -0600

Mike Fenner

Fri, 24 Feb 2012 17:07:50 +0000

Bev Christian

Thu, 23 Feb 2012 18:58:31 -0500

Mike Fenner

Thu, 23 Feb 2012 23:45:07 +0000

David D. Hillman

Thu, 23 Feb 2012 07:14:11 -0600

Steven Creswick

Thu, 23 Feb 2012 04:57:23 -0500

Brian Ellis

Thu, 23 Feb 2012 09:52:07 +0200

Larry Dzaugis

Wed, 22 Feb 2012 21:00:25 -0600

Bev Christian

Wed, 22 Feb 2012 21:29:43 -0500

Steve Gregory

Wed, 22 Feb 2012 21:06:51 -0500

Joyce Koo

Thu, 23 Feb 2012 01:50:13 +0000

Air Bubbles in Syringes of Solder Paste...

Steve Gregory

Wed, 22 Feb 2012 19:58:55 -0500

Steve Gregory

Wed, 22 Feb 2012 19:51:58 -0500

Aluminum 3003-H14

Re: Aluminum 3003-H14

Inge Hernefjord

Fri, 17 Feb 2012 00:19:31 +0100

Aluminum 3003-H14

Harp, Ken

Thu, 16 Feb 2012 21:44:09 +0000

Antwort: RE [TN] Antwort: [TN] R: [TN] Microballs

Frank Kriesch

Thu, 23 Feb 2012 15:23:08 +0100

Antwort: [TN] R: [TN] Microballs

Frank Kriesch

Wed, 22 Feb 2012 11:21:06 +0100

Apex

Re: Apex

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Fri, 24 Feb 2012 07:47:34 -0600

Apex

Thu, 23 Feb 2012 19:28:04 -0800

APEX

Louis Hart

Wed, 22 Feb 2012 23:40:29 +0000

APEX 2012 Technetters

Re: APEX 2012 Technetters

Ian Hanna

Thu, 23 Feb 2012 16:08:15 -0500

Re: APEX 2012 Technetters

Joyce Koo

Thu, 23 Feb 2012 21:05:55 +0000

Are Rosin and Resin Fluxes TRULY equivalent?

Re: Are Rosin and Resin Fluxes TRULY equivalent?

Mike Fenner

Sat, 18 Feb 2012 20:44:45 +0000

Are Rosin and Resin Fluxes TRULY equivalent?

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Fri, 17 Feb 2012 15:32:15 -0600

ASTM 4130 steel

Re: ASTM 4130 steel

Fox, Ian

Mon, 6 Feb 2012 08:54:38 +0000

Re: ASTM 4130 steel

R Sedlak

Fri, 3 Feb 2012 13:38:51 -0800

Re: ASTM 4130 steel

Giamis, Andy

Fri, 3 Feb 2012 09:28:01 -0600

ASTM 4130 steel

Victor Hernandez

Fri, 3 Feb 2012 09:17:20 -0600

AW: Gerber files viewer

Torsten Hagge

Tue, 28 Feb 2012 15:15:28 +0000

baking after strip of plating resist

Louis Hart

Tue, 14 Feb 2012 17:12:18 +0000

Cleaning ESD Floor Mats

Re: Cleaning ESD Floor Mats

Goodyear, Patrick

Thu, 23 Feb 2012 22:32:40 +0000

Cleaning ESD Floor Mats

Blair Hogg

Thu, 23 Feb 2012 13:53:29 -0600

Conf Coating in Cold and Clammy

Chris Mahanna

Wed, 15 Feb 2012 12:59:54 -0500

Steven Creswick

Wed, 15 Feb 2012 12:14:20 -0500

Whittaker, Dewey (EHCOE)

Wed, 15 Feb 2012 14:42:42 +0000

Douglas Pauls

Tue, 14 Feb 2012 16:04:14 -0600

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Tue, 14 Feb 2012 15:53:10 -0600

Douglas Pauls

Tue, 14 Feb 2012 15:50:11 -0600

David D. Hillman

Tue, 14 Feb 2012 07:02:21 -0600

Robert Kondner

Mon, 13 Feb 2012 18:54:13 -0500

Phil Bavaro

Mon, 13 Feb 2012 15:44:59 -0800

Robert Kondner

Mon, 13 Feb 2012 18:14:42 -0500

David D. Hillman

Mon, 13 Feb 2012 16:53:43 -0600

Joyce Koo

Mon, 13 Feb 2012 21:42:51 +0000

Chris Mahanna

Mon, 13 Feb 2012 16:24:14 -0500

Steven Creswick

Sat, 11 Feb 2012 12:06:14 -0500

Conf Coating in Cold and Clammy

Joyce Koo

Fri, 10 Feb 2012 23:53:50 +0000

Douglas Pauls

Fri, 10 Feb 2012 15:42:04 -0600

Congratulations, Mr.Hillman!

Inge Hernefjord

Fri, 3 Feb 2012 20:59:56 +0100

David D. Hillman

Fri, 3 Feb 2012 13:55:50 -0600

Victor Hernandez

Fri, 3 Feb 2012 12:20:04 -0600

Joyce Koo

Fri, 3 Feb 2012 18:19:12 +0000

Mike Buetow

Fri, 3 Feb 2012 13:14:56 -0500

Congratulations, Mr.Hillman!

Karen Tellefsen

Fri, 3 Feb 2012 13:10:21 -0500

Jack Olson

Fri, 3 Feb 2012 11:37:38 -0600

Correlation Factors for ROSE Testing

Whittaker, Dewey (EHCOE)

Fri, 17 Feb 2012 20:32:36 +0000

Joyce Koo

Fri, 17 Feb 2012 20:21:23 +0000

Graham Naisbitt

Fri, 17 Feb 2012 20:14:12 +0000

Richard Kraszewski

Fri, 17 Feb 2012 13:53:00 -0600

Whittaker, Dewey (EHCOE)

Fri, 17 Feb 2012 15:26:03 +0000

Douglas Pauls

Fri, 17 Feb 2012 08:23:05 -0600

Whittaker, Dewey (EHCOE)

Fri, 17 Feb 2012 14:16:50 +0000

Whittaker, Dewey (EHCOE)

Fri, 17 Feb 2012 13:41:05 +0000

PIRES Fabrice

Fri, 17 Feb 2012 09:03:48 +0100

Bev Christian

Thu, 16 Feb 2012 20:10:07 -0500

Brian Ellis

Fri, 17 Feb 2012 00:47:31 +0200

Graham Naisbitt

Thu, 16 Feb 2012 22:00:42 +0000

Lamar Young

Thu, 16 Feb 2012 16:08:42 -0500

Lamar Young

Thu, 16 Feb 2012 15:59:21 -0500

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Thu, 16 Feb 2012 14:57:27 -0600

Victor Hernandez

Thu, 16 Feb 2012 14:55:24 -0600

Douglas Pauls

Thu, 16 Feb 2012 14:38:15 -0600

Louis Hart

Thu, 16 Feb 2012 20:06:28 +0000

Correlation Factors for ROSE Testing

Glidden, Kevin

Thu, 16 Feb 2012 15:06:15 -0500

Richard Kraszewski

Thu, 16 Feb 2012 13:59:50 -0600

Correlation Factors for ROSE Testing & Cpk

Amol Kane (Asteelflash,US)

Tue, 21 Feb 2012 06:34:08 -0800

Richard Kraszewski

Sat, 18 Feb 2012 14:25:58 -0600

Brian Ellis

Sat, 18 Feb 2012 12:55:30 +0200

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Fri, 17 Feb 2012 14:54:39 -0600

Joyce Koo

Fri, 17 Feb 2012 20:31:02 +0000

Counterfeit Suspension Memo...

Richard Kraszewski

Fri, 17 Feb 2012 14:22:18 -0600

Re: Counterfeit Suspension Memo...

Gerald Bogert

Fri, 10 Feb 2012 11:49:21 -0500

Re: Counterfeit Suspension Memo...

Rick Bell

Fri, 10 Feb 2012 09:49:51 -0600

Re: Counterfeit Suspension Memo...

Steven Creswick

Fri, 10 Feb 2012 10:35:47 -0500

Counterfeit Suspension Memo...

Steve Gregory

Fri, 10 Feb 2012 10:01:32 -0500

Cu - dissolution and IMC growth rate

David D. Hillman

Thu, 2 Feb 2012 16:02:19 -0600

Mike Fenner

Thu, 2 Feb 2012 21:19:12 +0000

Guy Ramsey

Thu, 2 Feb 2012 14:48:37 -0500

Cu - dissolution and IMC growth rate

Rex Waygood

Thu, 2 Feb 2012 15:48:43 +0000

Stewart McCracken

Thu, 2 Feb 2012 10:11:55 +0000

Cu dissolution and IMC thickness questions

Stewart McCracken

Wed, 8 Feb 2012 09:55:43 +0000

ENIG thickness

Mike Fenner

Thu, 2 Feb 2012 21:09:10 +0000

David D. Hillman

Thu, 2 Feb 2012 13:40:48 -0600

Guy Ramsey

Thu, 2 Feb 2012 11:52:39 -0500

Whittaker, Dewey (EHCOE)

Thu, 2 Feb 2012 16:42:23 +0000

Rex Waygood

Thu, 2 Feb 2012 16:40:58 +0000

David D. Hillman

Thu, 2 Feb 2012 10:36:04 -0600

Guy Ramsey

Thu, 2 Feb 2012 11:25:18 -0500

Wenger, George M.

Thu, 2 Feb 2012 10:21:28 -0600

EXTERNAL: Re: [TN] Is this a gull wing lead?

John Burke

Thu, 2 Feb 2012 08:00:39 -0800

ENIG thickness

Victor Hernandez

Thu, 2 Feb 2012 09:37:46 -0600

Re: EXTERNAL: Re: [TN] Is this a gull wing lead?

Gumpert, Ben

Thu, 23 Feb 2012 21:22:37 +0000

Field Return Product w/corrosion product

Steve Gregory

Wed, 29 Feb 2012 14:41:42 -0500

Joyce Koo

Wed, 29 Feb 2012 18:14:38 +0000

Brian Ellis

Wed, 29 Feb 2012 20:01:30 +0200

Inge Hernefjord

Wed, 29 Feb 2012 18:32:27 +0100

Steven Creswick

Wed, 29 Feb 2012 12:06:20 -0500

Field Return Product w/corrosion product

Phil Bavaro

Wed, 29 Feb 2012 08:19:11 -0800

Victor Hernandez

Wed, 29 Feb 2012 08:53:17 -0600

Gerber files viewer

Brian Chandler

Tue, 28 Feb 2012 09:02:17 -0600

Blair Hogg

Tue, 28 Feb 2012 07:16:19 -0600

Steve Gregory

Mon, 27 Feb 2012 10:42:18 -0500

Karen Tellefsen

Mon, 27 Feb 2012 08:44:16 -0500

Gumpert, Ben

Mon, 27 Feb 2012 13:33:55 +0000

Montanher, Mickael Canassa

Mon, 27 Feb 2012 14:29:27 +0100

halides in water soluble fluxes

James Head

Mon, 27 Feb 2012 13:28:16 +0000

Gerber files viewer

Jim West

Mon, 27 Feb 2012 08:14:44 -0500

Phil Nutting

Wed, 29 Feb 2012 09:52:44 -0500

Brian Ellis

Wed, 29 Feb 2012 15:47:26 +0200

Joyce Koo

Wed, 29 Feb 2012 13:27:09 +0000

Amol Kane (Asteelflash,US)

Wed, 29 Feb 2012 05:22:45 -0800

Brian Ellis

Wed, 29 Feb 2012 13:57:05 +0200

Joyce Koo

Wed, 29 Feb 2012 11:07:29 +0000

Brian Ellis

Wed, 29 Feb 2012 12:32:53 +0200

Brian Ellis

Wed, 29 Feb 2012 09:48:43 +0200

Mike Fenner

Tue, 28 Feb 2012 22:23:24 +0000

Inge Hernefjord

Tue, 28 Feb 2012 23:14:51 +0100

halides in water soluble fluxes

Inge Hernefjord

Tue, 28 Feb 2012 23:11:46 +0100

Phil Nutting

Tue, 28 Feb 2012 14:12:36 -0500

High temperature inside Printer Machine

Re: High temperature inside Printer Machine

Inge Hernefjord

Fri, 17 Feb 2012 10:17:03 +0100

Re: High temperature inside Printer Machine

Joyce Koo

Thu, 16 Feb 2012 17:16:33 +0000

High temperature inside Printer Machine

Juliano Pacheco

Thu, 16 Feb 2012 15:12:55 -0200

How can I remove solder mask?

Carl VanWormer

Mon, 13 Feb 2012 07:16:20 -0800

Blakley, Peggi J CIV NSWC CRANE, GXSQ

Mon, 13 Feb 2012 08:01:24 -0500

Inge Hernefjord

Sat, 11 Feb 2012 07:48:40 +0100

Paul Edwards

Fri, 10 Feb 2012 16:44:01 -0800

How can I remove solder mask?

Steve Gregory

Thu, 9 Feb 2012 18:29:43 -0500

Carl VanWormer

Thu, 9 Feb 2012 10:00:00 -0800

IPC-4562 - Copper Foil Ductility

Harp, Ken

Thu, 2 Feb 2012 23:27:41 +0000

IPC-STD-030 underfill standard

Re: IPC-STD-030 underfill standard

Joyce Koo

Wed, 29 Feb 2012 15:57:38 +0000

IPC-STD-030 underfill standard

Joyce Koo

Mon, 27 Feb 2012 17:27:45 +0000

IR Reflow Oven capability

Nigel Burtt

Thu, 16 Feb 2012 10:07:13 -0600

Mike Fenner

Thu, 16 Feb 2012 11:35:14 +0000

Watson, Howard A

Wed, 15 Feb 2012 20:09:24 +0000

Guy Ramsey

Wed, 15 Feb 2012 13:04:46 -0500

IR Reflow Oven capability

David D. Hillman

Wed, 15 Feb 2012 10:47:15 -0600

Watson, Howard A

Wed, 15 Feb 2012 15:44:24 +0000

Is 99% USP IPA what most folks use?

Robert Kondner

Sun, 5 Feb 2012 14:54:13 -0500

Brian Ellis

Sun, 5 Feb 2012 09:55:27 +0200

Inge Hernefjord

Sun, 5 Feb 2012 08:33:38 +0100

Is 99% USP IPA what most folks use?

Phil Bavaro

Sat, 4 Feb 2012 17:40:21 -0800

Robert Kondner

Sat, 4 Feb 2012 19:24:33 -0500

Is this a gull wing lead?

Re: Is this a gull wing lead?

Larry Dzaugis

Wed, 22 Feb 2012 15:31:29 -0600

Is this a gull wing lead?

Gumpert, Ben

Wed, 22 Feb 2012 19:42:07 +0000

Late Friday Question

Re: Late Friday Question

Inge Hernefjord

Fri, 17 Feb 2012 23:45:57 +0100

Re: Late Friday Question

Joyce Koo

Fri, 17 Feb 2012 22:53:26 +0000

Late Friday Question

Steven Kelly

Fri, 17 Feb 2012 22:13:14 +0000

Lead Free Fillet Lift

Re: Lead Free Fillet Lift

David D. Hillman

Fri, 17 Feb 2012 18:42:37 -0600

Lead Free Fillet Lift

Jeff Popp

Fri, 17 Feb 2012 18:52:35 +0000

Lead to Hole Ratio for Wave and Selective Soldering

Re: Lead to Hole Ratio for Wave and Selective Soldering

Larry Dzaugis

Wed, 22 Feb 2012 16:01:47 -0600

Re: Lead to Hole Ratio for Wave and Selective Soldering

Mark Larson

Wed, 22 Feb 2012 09:11:14 -0600

Re: Lead to Hole Ratio for Wave and Selective Soldering

Mark Larson

Wed, 22 Feb 2012 09:05:34 -0600

Re: Lead to Hole Ratio for Wave and Selective Soldering

Jack Olson

Wed, 22 Feb 2012 08:33:34 -0600

Re: Lead to Hole Ratio for Wave and Selective Soldering

Mark Larson

Tue, 21 Feb 2012 10:02:36 -0600

Re: Lead to Hole Ratio for Wave and Selective Soldering

Reuven Rokah

Thu, 16 Feb 2012 09:01:05 +0200

Lead to Hole Ratio for Wave and Selective Soldering

Carl Ray

Wed, 15 Feb 2012 16:48:41 -0500

looking for suggestions for no-clean flux-core PB-free wire solder

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Robert Kondner

Mon, 27 Feb 2012 11:53:17 -0500

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Carl VanWormer

Mon, 27 Feb 2012 08:35:39 -0800

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Fox, Ian

Mon, 27 Feb 2012 16:31:41 +0000

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Karen Tellefsen

Mon, 27 Feb 2012 11:30:35 -0500

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Julie Silk

Mon, 27 Feb 2012 10:21:09 -0600

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Nigel Burtt

Mon, 27 Feb 2012 09:57:50 -0600

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Karen Tellefsen

Mon, 27 Feb 2012 08:53:51 -0500

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Phil Nutting

Mon, 27 Feb 2012 08:51:16 -0500

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Robert Kondner

Mon, 27 Feb 2012 07:46:02 -0500

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Nigel Burtt

Mon, 27 Feb 2012 02:55:17 -0600

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Nigel Burtt

Mon, 27 Feb 2012 02:53:25 -0600

Re: looking for suggestions for no-clean flux-core PB-free wire solder

Reuven Rokah

Sun, 26 Feb 2012 21:11:33 +0200

looking for suggestions for no-clean flux-core PB-free wire solder

Carl VanWormer

Sun, 26 Feb 2012 10:34:27 -0800

Max downward pressure applied to BGA with heat sink

Re: Max downward pressure applied to BGA with heat sink

Scott Lefebvre

Fri, 17 Feb 2012 10:44:54 -0800

Re: Max downward pressure applied to BGA with heat sink

Joyce Koo

Fri, 17 Feb 2012 18:14:40 +0000

Max downward pressure applied to BGA with heat sink

Scott Lefebvre

Fri, 17 Feb 2012 10:09:17 -0800

Measure of "How long after printing can parts be placed."

Re: Measure of "How long after printing can parts be placed."

Mike Fenner

Wed, 22 Feb 2012 22:10:13 +0000

Measure of "How long after printing can parts be placed."

Robert Kondner

Wed, 22 Feb 2012 08:11:01 -0700

Microballs

Inge Hernefjord

Wed, 22 Feb 2012 20:26:24 +0100

Inge Hernefjord

Wed, 22 Feb 2012 20:15:51 +0100

Phil Bavaro

Wed, 22 Feb 2012 08:25:13 -0800

Wed, 22 Feb 2012 09:04:30 +0100

Reuven Rokah

Wed, 22 Feb 2012 08:52:33 +0200

Microballs

Wed, 22 Feb 2012 07:33:12 +0100

Brian Ellis

Sat, 25 Feb 2012 10:39:03 +0200

Aleks Lozinsky

Fri, 24 Feb 2012 22:01:35 +0000

David D. Hillman

Fri, 24 Feb 2012 14:37:47 -0600

Stadem, Richard D.

Fri, 24 Feb 2012 14:08:45 -0600

Gregg Owens

Fri, 24 Feb 2012 20:07:27 +0000

Douglas Pauls

Fri, 24 Feb 2012 14:04:10 -0600

Graham Collins

Fri, 24 Feb 2012 15:49:26 -0400

David D. Hillman

Fri, 24 Feb 2012 13:43:52 -0600

Guy Ramsey

Mon, 20 Feb 2012 08:36:16 -0500

Bev Christian

Sat, 18 Feb 2012 09:06:46 -0500

Brian Ellis

Sat, 18 Feb 2012 14:19:16 +0200

David D. Hillman

Fri, 17 Feb 2012 17:54:09 -0600

David D. Hillman

Fri, 10 Feb 2012 15:54:00 -0600

Fox, Ian

Mon, 6 Feb 2012 08:41:32 +0000

Douglas Pauls

Fri, 3 Feb 2012 15:54:57 -0600

David D. Hillman

Fri, 3 Feb 2012 15:46:14 -0600

Stadem, Richard D.

Fri, 24 Feb 2012 08:13:47 -0600

Brian Ellis

Fri, 24 Feb 2012 15:47:41 +0200

Fox, Ian

Fri, 24 Feb 2012 13:33:33 +0000

Brian Ellis

Fri, 24 Feb 2012 15:27:05 +0200

Paul Reid

Fri, 24 Feb 2012 08:27:34 -0500

Aleks Lozinsky

Fri, 24 Feb 2012 13:26:49 +0000

Brian Ellis

Fri, 24 Feb 2012 15:17:02 +0200

David D. Hillman

Fri, 24 Feb 2012 07:07:47 -0600

Rivera, Raye

Fri, 17 Feb 2012 08:46:14 -0800

Nigel Burtt

Fri, 17 Feb 2012 08:23:36 -0600

Joyce Koo

Fri, 17 Feb 2012 14:04:25 +0000

Pietro Novati

Fri, 17 Feb 2012 14:34:14 +0100

Giamis, Andy

Fri, 17 Feb 2012 07:34:52 -0600

Raffaella Rognoni

Fri, 17 Feb 2012 14:04:27 +0100

G Sidney Cox

Fri, 17 Feb 2012 08:10:24 -0500

Robert Kondner

Fri, 17 Feb 2012 07:50:45 -0500

Brian Ellis

Fri, 17 Feb 2012 14:45:42 +0200

James Head

Fri, 17 Feb 2012 12:38:55 +0000

David D. Hillman

Fri, 17 Feb 2012 06:31:43 -0600

Chuck Brummer

Fri, 10 Feb 2012 08:45:04 -0800

Chuck Brummer

Fri, 10 Feb 2012 08:41:00 -0800

Anslow, Phillip (UK)

Fri, 10 Feb 2012 11:53:42 +0000

Steve Mikell

Fri, 10 Feb 2012 01:05:37 -0500

David D. Hillman

Thu, 9 Feb 2012 21:10:45 -0600

Dennis Fritz

Fri, 3 Feb 2012 15:32:12 -0500

Blair Hogg

Fri, 3 Feb 2012 14:26:16 -0600

Chuck Brummer

Fri, 3 Feb 2012 07:52:21 -0800

Dwight Mattix

Fri, 3 Feb 2012 06:42:21 -0800

Whittaker, Dewey (EHCOE)

Fri, 3 Feb 2012 14:35:01 +0000

Douglas Pauls

Fri, 3 Feb 2012 07:45:13 -0600

James Head

Fri, 3 Feb 2012 13:14:25 +0000

Fox, Ian

Fri, 3 Feb 2012 13:06:15 +0000

NTC: APEX 2012 TechNetters

David D. Hillman

Fri, 3 Feb 2012 06:53:02 -0600

Re: NTC: APEX 2012 TechNetters

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Mon, 27 Feb 2012 09:01:25 -0600

Brown, Dock

Mon, 27 Feb 2012 06:52:02 -0800

Phil Bavaro

Sun, 26 Feb 2012 14:53:44 -0800

Gregg Owens

Sat, 25 Feb 2012 07:15:00 +0000

Leland Woodall

Sat, 25 Feb 2012 02:30:38 +0000

Gregg Owens

Thu, 23 Feb 2012 23:37:21 +0000

NTC: APEX 2012 Technetters

Bev Christian

Thu, 23 Feb 2012 18:25:09 -0500

Kim Sterling

Thu, 23 Feb 2012 20:58:09 +0000

Ahne Oosterhof

Thu, 23 Feb 2012 09:40:11 -0800

Karen Tellefsen

Thu, 23 Feb 2012 12:38:34 -0500

Chuck Brummer

Thu, 23 Feb 2012 08:43:46 -0800

Goodyear, Patrick

Thu, 23 Feb 2012 16:05:03 +0000

Douglas Pauls

Thu, 23 Feb 2012 10:01:08 -0600

Pete

Thu, 23 Feb 2012 08:43:19 -0600

Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]

Thu, 23 Feb 2012 07:34:04 -0600

Bev Christian

Wed, 22 Feb 2012 21:33:42 -0500

John Burke

Thu, 23 Feb 2012 03:15:56 +0100

Leland Woodall

Thu, 23 Feb 2012 01:12:49 +0000

Ahne Oosterhof

Wed, 22 Feb 2012 15:01:08 -0800

Gregg Owens

Wed, 22 Feb 2012 21:46:51 +0000

Phil Bavaro

Wed, 22 Feb 2012 13:38:05 -0800

Larry Dzaugis

Wed, 22 Feb 2012 15:23:28 -0600

Brown, Dock

Wed, 22 Feb 2012 12:53:13 -0800

Karen Tellefsen

Wed, 22 Feb 2012 14:21:59 -0500

NTC: APEX 2012 Technetters

Douglas Pauls

Wed, 22 Feb 2012 13:11:09 -0600

Phil Bavaro

Wed, 22 Feb 2012 10:59:25 -0800

Old Harddisk for Mydata PnP

Re: Old Harddisk for Mydata PnP

Blair Hogg

Thu, 16 Feb 2012 11:55:30 -0600

Re: Old Harddisk for Mydata PnP

Carl VanWormer

Wed, 15 Feb 2012 06:28:22 -0800

Re: Old Harddisk for Mydata PnP

Poh KH

Wed, 15 Feb 2012 21:46:23 +0800

Post Thermal Cycle induced solder stress-fractures

Victor Hernandez

Fri, 17 Feb 2012 10:19:41 -0600

Query -- Fiducial

Re: Query -- Fiducial

James Head

Mon, 20 Feb 2012 09:53:55 +0000

Re: Query -- Fiducial

Rex Waygood

Mon, 20 Feb 2012 09:37:35 +0000

Query -- Fiducial

prashant chopra

Mon, 20 Feb 2012 15:04:38 +0530

R: [TN] Cu - dissolution and IMC growth rate

Inge Hernefjord

Fri, 3 Feb 2012 23:38:19 +0100

Douglas Pauls

Fri, 3 Feb 2012 15:56:10 -0600

R: [TN] Cu - dissolution and IMC growth rate

Inge Hernefjord

Fri, 3 Feb 2012 21:48:34 +0100

SALA GABRIELE

Thu, 2 Feb 2012 23:58:35 +0100

R: [TN] Cu - dissolution and IMC growth rate

Joyce Koo

Thu, 2 Feb 2012 16:42:49 +0000

SALA GABRIELE

Thu, 2 Feb 2012 17:20:22 +0100

R: [TN] Microballs

Re: R: [TN] Microballs

Inge

Fri, 24 Feb 2012 13:07:51 +0100

R: [TN] Microballs

Fri, 24 Feb 2012 12:53:07 +0100

Re: R: [TN] Microballs

Thu, 23 Feb 2012 16:02:59 +0100

Re: R: [TN] Microballs

Victor Hernandez

Wed, 22 Feb 2012 05:43:24 -0600

R: [TN] Microballs

SALA GABRIELE

Wed, 22 Feb 2012 09:06:44 +0100

R: [TN] R: [TN] Microballs

Re: R: [TN] R: [TN] Microballs

Victor Hernandez

Wed, 22 Feb 2012 05:46:14 -0600

R: [TN] R: [TN] Microballs

SALA GABRIELE

Wed, 22 Feb 2012 11:21:33 +0100

R: [TN] Restoration of Humidity Indicator Cards

SALA GABRIELE

Tue, 14 Feb 2012 22:46:06 +0100

RE [TN] Antwort: [TN] R: [TN] Microballs

Thu, 23 Feb 2012 07:15:11 +0100

RES: Gerber files viewer

Juliano Pacheco

Mon, 27 Feb 2012 10:33:41 -0300

RES: High temperature inside Printer Machine

Re: RES: High temperature inside Printer Machine

Phil Bavaro

Thu, 16 Feb 2012 09:40:42 -0800

RES: High temperature inside Printer Machine

Juliano Pacheco

Thu, 16 Feb 2012 15:27:57 -0200

Restoration of Humidity Indicator Cards

Re: Restoration of Humidity Indicator Cards

Chuck Brummer

Tue, 14 Feb 2012 13:39:43 -0800

Restoration of Humidity Indicator Cards

Blair Hogg

Tue, 14 Feb 2012 15:12:17 -0600

Sanding board edges after reflow

John Burke

Mon, 20 Feb 2012 15:14:06 -0800

Bob Landman

Mon, 20 Feb 2012 17:57:43 -0500

Tontis, Theodore

Mon, 20 Feb 2012 15:04:41 -0500

Phil Bavaro

Mon, 20 Feb 2012 10:52:53 -0800

Graham Collins

Mon, 20 Feb 2012 14:51:38 -0400

Bob Landman

Mon, 20 Feb 2012 13:46:49 -0500

Sanding board edges after reflow

Amol Kane (Asteelflash,US)

Mon, 20 Feb 2012 08:40:02 -0800

Bob Landman

Sat, 18 Feb 2012 14:23:04 -0500

Setting special nozzle on fuji flexa

Juliano Pacheco

Wed, 15 Feb 2012 11:50:28 -0200

Siliporite molecular sieve

Cedric ORAIN

Fri, 24 Feb 2012 17:48:18 +0100

Stadem, Richard D.

Fri, 24 Feb 2012 08:09:24 -0600

Cedric ORAIN

Fri, 24 Feb 2012 14:14:22 +0100

Siliporite molecular sieve

Bev Christian

Fri, 24 Feb 2012 06:36:44 -0500

Cedric ORAIN

Fri, 24 Feb 2012 11:20:30 +0100

Silver immersion with gold fingers

Re: Silver immersion with gold fingers

Joyce Koo

Thu, 16 Feb 2012 20:02:13 +0000

Re: Silver immersion with gold fingers

Inge Hernefjord

Thu, 16 Feb 2012 19:37:23 +0100

Re: Silver immersion with gold fingers

Thomas E Kemp

Fri, 10 Feb 2012 10:01:01 -0600

Silver immersion with gold fingers

John Burke

Fri, 10 Feb 2012 07:48:48 -0800

Solder etchant, Sn-99.3-Cu-0.7, Post Thermal Cycle induced fractures

Re: Solder etchant, Sn-99.3-Cu-0.7, Post Thermal Cycle induced fractures

Jac Kroeker

Fri, 17 Feb 2012 13:57:22 -0800

Re: Solder etchant, Sn-99.3-Cu-0.7, Post Thermal Cycle induced fractures

Inge Hernefjord

Fri, 17 Feb 2012 20:21:13 +0100

Re: Solder etchant, Sn-99.3-Cu-0.7, Post Thermal Cycle induced fractures

Victor Hernandez

Fri, 17 Feb 2012 10:11:33 -0600

Soldermask adhesion test

Douglas Pauls

Tue, 7 Feb 2012 12:59:59 -0600

Amol Kane (Asteelflash,US)

Tue, 7 Feb 2012 10:34:44 -0800

Guy Ramsey

Tue, 7 Feb 2012 13:27:51 -0500

Surface Finish for Backplane Board

Inge Hernefjord

Tue, 7 Feb 2012 17:15:59 +0100

Soldermask adhesion test

Amol Kane (Asteelflash,US)

Tue, 7 Feb 2012 06:59:25 -0800

Re: Surface Finish for Backplane Board

Whittaker, Dewey (EHCOE)

Fri, 10 Feb 2012 13:42:00 +0000

Re: Surface Finish for Backplane Board

Joyce Koo

Fri, 10 Feb 2012 08:05:30 +0000

Re: Surface Finish for Backplane Board

Reuven Rokah

Fri, 10 Feb 2012 09:55:37 +0200

Surface Finish for Backplane Board

prashant chopra

Fri, 10 Feb 2012 10:55:09 +0530

TechNet Archives

Keach Sasamori

Fri, 3 Feb 2012 16:10:42 +0000

Jack Olson

Fri, 3 Feb 2012 09:26:12 -0600

Keach Sasamori

Thu, 2 Feb 2012 18:10:50 +0000

Steven Creswick

Thu, 2 Feb 2012 12:54:43 -0500

David Bergman

Thu, 2 Feb 2012 16:40:40 +0000

TechNet Archives

Jack Olson

Wed, 1 Feb 2012 12:08:14 -0600

Tin Pest

Whittaker, Dewey (EHCOE)

Fri, 10 Feb 2012 13:27:13 +0000

Bob METCALF

Thu, 9 Feb 2012 19:38:52 -0800

Douglas Pauls

Thu, 9 Feb 2012 16:11:03 -0600

Whittaker, Dewey (EHCOE)

Thu, 9 Feb 2012 21:45:13 +0000

Typical ROSE Test Duration

Mike Fenner

Thu, 9 Feb 2012 20:37:03 +0000

Tin Pest

Chris Hunt

Thu, 9 Feb 2012 13:22:09 +0000

Tin/Zinc whiskers

Re: Tin/Zinc whiskers

Inge Hernefjord

Fri, 17 Feb 2012 16:41:58 +0100

Re: Tin/Zinc whiskers

Dennis Fritz

Fri, 17 Feb 2012 10:20:00 -0500

Tin/Zinc whiskers

Victor Hernandez

Fri, 17 Feb 2012 09:06:52 -0600

Brian Ellis

Thu, 2 Feb 2012 23:55:28 +0200

Brian Ellis

Wed, 1 Feb 2012 16:26:22 +0200

Brian Ellis

Wed, 1 Feb 2012 16:19:04 +0200

Douglas Pauls

Wed, 1 Feb 2012 07:51:54 -0600