LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

October 2011

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:

Subject	From	Date
Re: standard industry silkscreened symbology for Pb-free assembly	Jack Olson	Sat, 1 Oct 2011 15:53:38 -0500
Re: standard industry silkscreened symbology for Pb-free assembly	Ahne Oosterhof	Sat, 1 Oct 2011 17:02:04 -0700
CALCE Prediction of Potential Failures Risks in Toyota Vehicles Confirmed by NASA Scientists	Bob Landman	Sun, 2 Oct 2011 15:14:51 -0400
Re: CALCE Prediction of Potential Failures Risks in Toyota Vehicles Confirmed by NASA Scientists	Inge Hernefjord	Mon, 3 Oct 2011 04:25:35 -0700
Jax Remix - PCBWest 2011	Jack Olson	Mon, 3 Oct 2011 10:48:02 -0500
Re: Board question	Leif Laerum	Mon, 3 Oct 2011 12:02:11 -0500
Re: Board question	vladimir Igoshev	Mon, 3 Oct 2011 17:15:52 +0000
Re: Board question	Reuven Rokah	Mon, 3 Oct 2011 19:41:21 +0200
used equipment	Linda Langley	Mon, 3 Oct 2011 13:50:54 -0400
Re: used equipment	Richard Hatano	Mon, 3 Oct 2011 11:03:10 -0700
Re: used equipment	Victor Hernandez	Mon, 3 Oct 2011 13:04:34 -0500
Denderetic Growth Clip	Richard Kraszewski	Mon, 3 Oct 2011 14:13:48 -0500
Re: Denderetic Growth Clip	Joyce Koo	Mon, 3 Oct 2011 15:22:55 -0400
AW: [TN] standard industry silkscreened symbology for Pb-free assembly	Neifer, Gebhard	Tue, 4 Oct 2011 08:29:05 +0000
Re: used equipment	Inge Hernefjord	Tue, 4 Oct 2011 10:58:12 +0200
Re: Denderetic Growth Clip	Inge Hernefjord	Tue, 4 Oct 2011 11:29:46 +0200
Re: Denderetic Growth Clip	Brian Ellis	Tue, 4 Oct 2011 14:31:30 +0300
Dielectric Constant of FR-4 over temperature	McGlaughlin, Jeffrey A	Tue, 4 Oct 2011 08:26:09 -0400
Re: Dielectric Constant of FR-4 over temperature	Fox, Ian	Tue, 4 Oct 2011 12:40:07 +0000
Re: used equipment	John Goulet	Tue, 4 Oct 2011 12:42:39 +0000
Re: Dielectric Constant of FR-4 over temperature	Louis Hart	Tue, 4 Oct 2011 12:58:28 +0000
PCBA Packaging Standards	Robert DeQuattro	Tue, 4 Oct 2011 13:56:34 +0000
Carbon Pads	Linda Langley	Tue, 4 Oct 2011 12:53:29 -0400
Re: Carbon Pads	Woolley, Mark D. (Mark)	Tue, 4 Oct 2011 10:59:27 -0600
Re: PCBA Packaging Standards	Reuven Rokah	Tue, 4 Oct 2011 19:35:40 +0200
R: [TN] PCBA Packaging Standards	SALA GABRIELE	Tue, 4 Oct 2011 19:56:36 +0200
Re: R: [TN] PCBA Packaging Standards	Reuven Rokah	Tue, 4 Oct 2011 20:14:26 +0200
Re: used equipment	Blair Hogg	Tue, 4 Oct 2011 13:44:53 -0500
Re: R: [TN] PCBA Packaging Standards	Robert DeQuattro	Tue, 4 Oct 2011 18:53:26 +0000
Re: PCBA Packaging Standards	Gregg Owens	Tue, 4 Oct 2011 13:09:58 -0700
R: [TN] PCBA Packaging Standards	SALA GABRIELE	Tue, 4 Oct 2011 22:24:56 +0200
R: [TN] PCBA Packaging Standards	SALA GABRIELE	Tue, 4 Oct 2011 22:34:31 +0200
Re: R: [TN] PCBA Packaging Standards	Robert DeQuattro	Tue, 4 Oct 2011 20:40:11 +0000
Re: Carbon Pads	Inge Hernefjord	Wed, 5 Oct 2011 00:10:28 +0200
Re: used equipment	Goodyear, Patrick	Tue, 4 Oct 2011 22:29:31 +0000
AW: [TN] Carbon Pads	Neifer, Gebhard	Wed, 5 Oct 2011 07:27:15 +0000
Re: Carbon Pads	Guy Ramsey	Wed, 5 Oct 2011 07:33:24 -0400
CTE Controlled Laminate	Marsico, James - ES	Wed, 5 Oct 2011 10:12:18 -0400
Re: CTE Controlled Laminate	Fox, Ian	Wed, 5 Oct 2011 16:32:06 +0000
Re: Dielectric Constant of FR-4 over temperature	Paul Edwards	Wed, 5 Oct 2011 16:47:34 -0700
Soldermask undercut definitions	winning	Thu, 6 Oct 2011 11:18:05 +0800
Soldermask recommendation	Glidden, Kevin	Thu, 6 Oct 2011 09:39:49 -0400
Re: Soldermask recommendation	Bob METCALF	Thu, 6 Oct 2011 08:11:06 -0700
Re: Soldermask recommendation	Joyce Koo	Thu, 6 Oct 2011 13:05:46 -0400
Re: Soldermask recommendation	Richard Hatano	Thu, 6 Oct 2011 14:44:47 -0700
Re: Soldermask recommendation	Bob METCALF	Thu, 6 Oct 2011 16:57:18 -0700
Re: Soldermask recommendation	Steve Gregory	Thu, 6 Oct 2011 20:16:00 -0400
Re: [DC] QFN layout	Steve Gregory	Thu, 6 Oct 2011 20:44:29 -0400
Re: Soldermask recommendation	Joyce Koo	Thu, 6 Oct 2011 22:46:18 -0400
NTC Friday Element Quiz - the Question	David D. Hillman	Fri, 7 Oct 2011 00:10:59 -0500
Re: NTC Friday Element Quiz - the Question	Phil Kinner	Fri, 7 Oct 2011 07:02:57 +0100
Re: [DC] QFN layout	Braddock, Iain (UK)	Fri, 7 Oct 2011 09:10:59 +0100
Re: NTC Friday Element Quiz - the Question	Steven Creswick	Fri, 7 Oct 2011 05:32:04 -0400
Re: EXTERNAL: Re: [TN] [DC] QFN layout	Gumpert, Ben	Fri, 7 Oct 2011 06:01:28 -0400
Re: NTC Friday Element Quiz - the Question	Carroll, Thomas A	Fri, 7 Oct 2011 07:07:59 -0500
Re: NTC Friday Element Quiz - the Question	Fox, Ian	Fri, 7 Oct 2011 12:24:08 +0000
Re: NTC Friday Element Quiz - the Question	Stadem, Richard D.	Fri, 7 Oct 2011 07:41:25 -0500
Re: NTC Friday Element Quiz - the Question	Craig Sullivan	Fri, 7 Oct 2011 08:48:29 -0400
AW: [TN] NTC Friday Element Quiz - the Question	Neifer, Gebhard	Fri, 7 Oct 2011 13:29:33 +0000
Re: NTC Friday Element Quiz - the Question	Giamis, Andy	Fri, 7 Oct 2011 08:51:02 -0500
FR1	Victor Hernandez	Fri, 7 Oct 2011 11:31:36 -0500
Re: FR1	Victor Hernandez	Fri, 7 Oct 2011 13:32:11 -0500
Re: FR1	Victor Hernandez	Fri, 7 Oct 2011 14:24:44 -0500
Re: NTC Friday Element Quiz - the Question	Bryon Boone	Fri, 7 Oct 2011 20:03:27 -0400
The Use of Tack Soldering	David D. Hillman	Sun, 9 Oct 2011 21:32:31 -0500
Re: The Use of Tack Soldering	Stadem, Richard D.	Mon, 10 Oct 2011 08:24:38 -0500
Re: The Use of Tack Soldering	Whittaker, Dewey (EHCOE)	Mon, 10 Oct 2011 07:21:20 -0700
NTC Friday Element Quiz - the Answer	David D. Hillman	Mon, 10 Oct 2011 10:24:05 -0500
ORH1 flux residues	Phil Bavaro	Mon, 10 Oct 2011 16:49:06 -0700
Re: ORH1 flux residues	Robert Kondner	Mon, 10 Oct 2011 20:12:12 -0400
Re: ORH1 flux residues	Mumtaz Bora	Mon, 10 Oct 2011 17:35:46 -0700
Re: ORH1 flux residues	Julie Silk	Tue, 11 Oct 2011 00:28:11 -0500
Re: The Use of Tack Soldering	Julie Silk	Tue, 11 Oct 2011 00:34:03 -0500
AW: [TN] NTC Friday Element Quiz - the Answer	Neifer, Gebhard	Tue, 11 Oct 2011 06:41:29 +0000
Re: The Use of Tack Soldering	Graham Collins	Tue, 11 Oct 2011 07:32:00 -0300
Re: ORH1 flux residues	David D. Hillman	Tue, 11 Oct 2011 07:20:38 -0500
Re: AW: [TN] NTC Friday Element Quiz - the Answer	David D. Hillman	Tue, 11 Oct 2011 07:28:14 -0500
Re: ORH1 flux residues	Karen Tellefsen	Tue, 11 Oct 2011 08:52:22 -0400
Re: FR1	Karen Tellefsen	Tue, 11 Oct 2011 09:09:50 -0400
Re: [DC] QFN layout	Pete	Tue, 11 Oct 2011 08:32:22 -0500
Re: [DC] QFN layout	Robert Kondner	Tue, 11 Oct 2011 10:29:14 -0400
Re: [DC] QFN layout	Karen Tellefsen	Tue, 11 Oct 2011 10:39:18 -0400
Re: [DC] QFN layout	Robert Kondner	Tue, 11 Oct 2011 11:51:18 -0400
Re: [DC] QFN layout	Paul Edwards	Tue, 11 Oct 2011 09:08:56 -0700
Re: [DC] QFN layout	Paul Edwards	Tue, 11 Oct 2011 09:46:23 -0700
Re: [DC] QFN layout	Robert Kondner	Tue, 11 Oct 2011 12:48:46 -0400
Re: ORH1 flux residues	Shean Dalton	Tue, 11 Oct 2011 12:26:34 -0500
Re: ORH1 flux residues	Stadem, Richard D.	Tue, 11 Oct 2011 12:39:33 -0500
Re: ORH1 flux residues	Gerald Bogert	Tue, 11 Oct 2011 14:15:53 -0400
Re: [DC] QFN layout	Robert Kondner	Tue, 11 Oct 2011 14:59:22 -0400
Wire soldering question	Keith Calhoun	Tue, 11 Oct 2011 15:55:41 -0400
Exposed Copper Detection	Stadem, Richard D.	Tue, 11 Oct 2011 15:05:51 -0500
Re: Wire soldering question	David D. Hillman	Tue, 11 Oct 2011 15:12:59 -0500
Re: Exposed Copper Detection	R Sedlak	Tue, 11 Oct 2011 13:23:40 -0700
Re: Wire soldering question	Whittaker, Dewey (EHCOE)	Tue, 11 Oct 2011 13:33:34 -0700
Re: ORH1 flux residues	Phil Bavaro	Tue, 11 Oct 2011 16:54:23 -0700
Re: [DC] QFN layout	Paul Edwards	Tue, 11 Oct 2011 17:21:33 -0700
Re: Exposed Copper Detection	Bev Christian	Tue, 11 Oct 2011 21:07:15 -0400
Re: Wire soldering question	Inge	Wed, 12 Oct 2011 12:27:10 +0200
Re: Wire soldering question	Brian Ellis	Wed, 12 Oct 2011 13:59:43 +0300
Re: Wire soldering question	Inge	Wed, 12 Oct 2011 13:20:20 +0200
Re: Wire soldering question	Amol Kane	Wed, 12 Oct 2011 07:29:03 -0400
Re: Wire soldering question - Utrasonics discussion	David D. Hillman	Wed, 12 Oct 2011 07:14:28 -0500
Re: Wire soldering question	Douglas Pauls	Wed, 12 Oct 2011 07:21:04 -0500
Re: Wire soldering question	Douglas Pauls	Wed, 12 Oct 2011 07:22:10 -0500
Re: ORH1 flux residues	Douglas Pauls	Wed, 12 Oct 2011 07:28:36 -0500
Re: Wire soldering question - Utrasonics discussion	Amol Kane	Wed, 12 Oct 2011 08:33:32 -0400
Re: ORH1 flux residues	Gerald Bogert	Wed, 12 Oct 2011 08:43:42 -0400
Re: Wire soldering question - Utrasonics discussion	David D. Hillman	Wed, 12 Oct 2011 07:58:05 -0500
Re: Wire soldering question - Utrasonics discussion	Steven Creswick	Wed, 12 Oct 2011 09:10:37 -0400
Re: Wire soldering question - Utrasonics discussion	Steven Creswick	Wed, 12 Oct 2011 09:27:50 -0400
Re: Wire soldering question - Utrasonics discussion	Brian Ellis	Wed, 12 Oct 2011 16:35:29 +0300
Re: Exposed Copper Detection	Stadem, Richard D.	Wed, 12 Oct 2011 08:41:12 -0500
Re: [DC] QFN layout	Jack Olson	Wed, 12 Oct 2011 08:49:53 -0500
Re: [DC] QFN layout	Pete	Wed, 12 Oct 2011 09:00:38 -0500
Re: Exposed Copper Detection	Ian Hanna	Wed, 12 Oct 2011 10:02:54 -0400
Re: Wire soldering question - Utrasonics discussion	David D. Hillman	Wed, 12 Oct 2011 09:05:10 -0500
Re: Wire soldering question - Utrasonics discussion	Stadem, Richard D.	Wed, 12 Oct 2011 09:05:47 -0500
Re: NTC [TN] Wire soldering question	Stadem, Richard D.	Wed, 12 Oct 2011 09:10:44 -0500
Re: [DC] QFN layout	Karen Tellefsen	Wed, 12 Oct 2011 10:16:24 -0400
Re: Wire soldering question - Utrasonics discussion	Stadem, Richard D.	Wed, 12 Oct 2011 09:24:35 -0500
Re: Exposed Copper Detection	Goodyear, Patrick	Wed, 12 Oct 2011 15:06:42 +0000
Re: Exposed Copper Detection	Whittaker, Dewey (EHCOE)	Wed, 12 Oct 2011 08:34:40 -0700
Re: ORH1 flux residues	Julie Silk	Wed, 12 Oct 2011 11:09:07 -0500
Re: ORH1 flux residues	Wenger, George M.	Wed, 12 Oct 2011 11:20:00 -0500
Re: Wire soldering question	Paul Edwards	Wed, 12 Oct 2011 09:38:29 -0700
Re: ORH1 flux residues	Shean Dalton	Wed, 12 Oct 2011 11:39:14 -0500
Re: Wire soldering question	Ahne Oosterhof	Wed, 12 Oct 2011 09:43:47 -0700
Re: [DC] QFN layout	Paul Edwards	Wed, 12 Oct 2011 10:13:47 -0700
Re: Wire soldering question - Utrasonics discussion	Amol Kane	Wed, 12 Oct 2011 13:32:08 -0400
Lacing tape	Phil Bavaro	Wed, 12 Oct 2011 16:30:01 -0700
Re: Lacing tape	Gregg Owens	Wed, 12 Oct 2011 17:14:23 -0700
Re: [DC] QFN layout	Tan Geok Ang	Thu, 13 Oct 2011 15:34:11 +0800
Re: Wire soldering question	Juan T. Marugán	Thu, 13 Oct 2011 05:18:00 -0500
Re: [DC] QFN layout	Bush, Brien	Thu, 13 Oct 2011 06:38:12 -0400
Re: [DC] QFN layout	Braddock, Iain (UK)	Thu, 13 Oct 2011 12:10:44 +0100
Re: [DC] QFN layout	Gumpert, Ben	Thu, 13 Oct 2011 08:06:34 -0400
Re: [DC] QFN layout	Guy Ramsey	Thu, 13 Oct 2011 08:17:50 -0400
Re: Wire soldering question - Utrasonics discussion	Steven Creswick	Thu, 13 Oct 2011 08:42:16 -0400
Re: Wire soldering question - Utrasonics discussion	Brian Ellis	Thu, 13 Oct 2011 16:18:51 +0300
Re: Wire soldering question - Utrasonics discussion	Steven Creswick	Thu, 13 Oct 2011 09:30:23 -0400
Re: Wire soldering question	Whittaker, Dewey (EHCOE)	Thu, 13 Oct 2011 06:40:46 -0700
Re: [DC] QFN layout	Robert Kondner	Thu, 13 Oct 2011 09:58:12 -0400
Re: [DC] QFN layout	Robert Kondner	Thu, 13 Oct 2011 10:01:35 -0400
Re: Wire soldering question - Utrasonics discussion	Stadem, Richard D.	Thu, 13 Oct 2011 10:14:14 -0500
Re: Wire soldering question - Utrasonics discussion	Stadem, Richard D.	Thu, 13 Oct 2011 10:16:05 -0500
Re: [DC] QFN layout	Guy Ramsey	Thu, 13 Oct 2011 11:40:17 -0400
Re: Wire soldering question	Inge Hernefjord	Thu, 13 Oct 2011 18:11:47 +0200
Re: [DC] QFN layout	Braddock, Iain (UK)	Thu, 13 Oct 2011 17:31:33 +0100
Re: [DC] QFN layout	Julie Silk	Thu, 13 Oct 2011 12:06:49 -0500
Re: [DC] QFN layout	Richard D. Krug	Thu, 13 Oct 2011 13:23:36 -0400
Solder Mask Request	Gregg Owens	Thu, 13 Oct 2011 16:21:33 -0700
Re: [DC] QFN layout	Tan Geok Ang	Fri, 14 Oct 2011 11:53:53 +0800
Pre-tinning Oxidized IC Leads	Forrester, Michael (H USA)	Fri, 14 Oct 2011 08:58:08 -0400
automated response	Jonathan Griffiths Merlin Circuit Technology Ltd	Fri, 14 Oct 2011 13:58:17 +0100
Re: Pre-tinning Oxidized IC Leads	Wenger, George M.	Fri, 14 Oct 2011 09:00:29 -0500
Re: FR1	Victor Hernandez	Fri, 14 Oct 2011 09:55:01 -0500
Re: [DC] QFN layout	Steve Gregory	Fri, 14 Oct 2011 12:15:56 -0400
Re: [DC] QFN layout	Robert Kondner	Fri, 14 Oct 2011 13:10:35 -0400
Re: [DC] QFN layout	Robert Kondner	Fri, 14 Oct 2011 13:11:51 -0400
Re: [DC] QFN layout	Steve Gregory	Fri, 14 Oct 2011 13:15:55 -0400
Re: [DC] QFN layout	Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]	Fri, 14 Oct 2011 12:16:55 -0500
Re: [DC] QFN layout	Upton, Shawn	Fri, 14 Oct 2011 19:05:29 +0000
dimensional measurements	Louis Hart	Fri, 14 Oct 2011 21:33:20 +0000
Re: Laser Depaneling	Stephan Schmidt	Sat, 15 Oct 2011 00:17:33 +0000
Re: Pre-tinning Oxidized IC Leads	David D. Hillman	Fri, 14 Oct 2011 21:27:55 -0500
Re: Pre-tinning Oxidized IC Leads	Inge Hernefjord	Sat, 15 Oct 2011 10:54:42 +0200
NTC Friday Element Quiz - the Question	David D. Hillman	Sat, 15 Oct 2011 19:41:29 -0500
Re: NTC Friday Element Quiz - the Question	Blair Hogg	Sat, 15 Oct 2011 20:16:07 -0500
Re: NTC Friday Element Quiz - the Question	Brian Ellis	Sun, 16 Oct 2011 08:03:29 +0300
Re: NTC Friday Element Quiz - the Question	Steven Creswick	Sun, 16 Oct 2011 10:05:18 -0400
Re: NTC Friday Element Quiz - the Question	Joyce Koo	Sun, 16 Oct 2011 13:29:13 -0400
Re: NTC Friday Element Quiz - the Question	Fox, Ian	Mon, 17 Oct 2011 07:46:24 +0000
Re: NTC Friday Element Quiz - the Question	David D. Hillman	Mon, 17 Oct 2011 08:35:12 -0500
Re: NTC Friday Element Quiz - the Question	Brian Ellis	Mon, 17 Oct 2011 16:41:53 +0300
Re: NTC Friday Element Quiz - the Question	Carroll, Thomas A	Mon, 17 Oct 2011 08:51:51 -0500
Re: NTC Friday Element Quiz - the Question	Carroll, Thomas A	Mon, 17 Oct 2011 08:57:25 -0500
Re: NTC Friday Element Quiz - the Question	Steven Creswick	Mon, 17 Oct 2011 10:10:02 -0400
Re: NTC Friday Element Quiz - the Question	Goodyear, Patrick	Mon, 17 Oct 2011 14:53:46 +0000
Re: NTC Friday Element Quiz - the Question	Blair Hogg	Mon, 17 Oct 2011 09:54:05 -0500
Re: NTC Friday Element Quiz - the Question	Stadem, Richard D.	Mon, 17 Oct 2011 10:01:31 -0500
Re: NTC Friday Element Quiz - the Question	Frederick Miller	Mon, 17 Oct 2011 11:08:05 -0400
Re: NTC Friday Element Quiz - the Question	Phil Bavaro	Mon, 17 Oct 2011 08:27:11 -0700
Reflow of BGA	Goodyear, Patrick	Mon, 17 Oct 2011 17:10:29 +0000
Re: Reflow of BGA	Ioan Tempea	Mon, 17 Oct 2011 13:15:44 -0400
Re: Reflow of BGA	David Tremmel	Mon, 17 Oct 2011 12:21:09 -0500
Re: Reflow of BGA	Chris Knudsen	Mon, 17 Oct 2011 13:32:26 -0400
Re: Reflow of BGA	Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]	Mon, 17 Oct 2011 12:40:11 -0500
Re: Reflow of BGA	Guy Ramsey	Mon, 17 Oct 2011 13:54:57 -0400
Re: Reflow of BGA	Harp, Ken	Mon, 17 Oct 2011 17:56:38 +0000
High Phosphorous content on ENIG PCB	Fabien Guizelin	Tue, 18 Oct 2011 00:39:22 +0000
Re: High Phosphorous content on ENIG PCB	Bob METCALF	Mon, 17 Oct 2011 19:07:22 -0700
NTC Friday Element Quiz - the Answer	David D. Hillman	Mon, 17 Oct 2011 22:41:35 -0500
Re: High Phosphorous content on ENIG PCB	Fabien Guizelin	Tue, 18 Oct 2011 04:30:55 +0000
Re: NTC Friday Element Quiz - the Answer	Fox, Ian	Tue, 18 Oct 2011 08:40:45 +0000
AW: [TN] NTC Friday Element Quiz - the Answer	Neifer, Gebhard	Tue, 18 Oct 2011 10:13:43 +0000
Component sectioning labs	Gavin B. Fowdur	Tue, 18 Oct 2011 06:00:49 -0500
Re: NTC Friday Element Quiz - the Answer	Carroll, Thomas A	Tue, 18 Oct 2011 06:29:48 -0500
SMD Component spacing guideline -- help required	prashant chopra	Tue, 18 Oct 2011 17:42:10 +0530
Re: SMD Component spacing guideline -- help required	Upton, Shawn	Tue, 18 Oct 2011 12:16:02 +0000
Re: SMD Component spacing guideline -- help required	Guy Ramsey	Tue, 18 Oct 2011 08:27:24 -0400
Re: SMD Component spacing guideline -- help required	Upton, Shawn	Tue, 18 Oct 2011 12:35:53 +0000
Re: NTC Friday Element Quiz - the Answer	David D. Hillman	Tue, 18 Oct 2011 07:40:43 -0500
Re: High Phosphorous content on ENIG PCB	David D. Hillman	Tue, 18 Oct 2011 07:49:05 -0500
Re: Component sectioning labs	Ahmad, Syed	Tue, 18 Oct 2011 05:51:56 -0700
Re: Component sectioning labs	Ahmad, Syed	Tue, 18 Oct 2011 05:53:22 -0700
BGA corner "L" shape glue removal process	Victor Hernandez	Tue, 18 Oct 2011 08:05:25 -0500
Re: Component sectioning labs	Marino Verderio	Tue, 18 Oct 2011 15:36:26 +0200
Re: Component sectioning labs	Francesco Di Maio	Tue, 18 Oct 2011 15:37:21 +0200
Re: High Phosphorous content on ENIG PCB	Pete	Tue, 18 Oct 2011 08:54:43 -0500
Re: SMD Component spacing guideline -- help required	Guy Ramsey	Tue, 18 Oct 2011 10:00:07 -0400
Re: High Phosphorous content on ENIG PCB	Inge Hernefjord	Tue, 18 Oct 2011 16:28:03 +0200
Re: SMD Component spacing guideline -- help required	Brian Ellis	Tue, 18 Oct 2011 17:32:06 +0300
Re: BGA corner "L" shape glue removal process	Phil Bavaro	Tue, 18 Oct 2011 08:19:19 -0700
Re: Component sectioning labs	Ahne Oosterhof	Tue, 18 Oct 2011 08:41:09 -0700
Re: BGA corner "L" shape glue removal process	Victor Hernandez	Tue, 18 Oct 2011 10:43:19 -0500
Strength of 63/37 at Various Temperatures	Richard Kraszewski	Tue, 18 Oct 2011 11:37:49 -0500
Re: Strength of 63/37 at Various Temperatures	Joyce Koo	Tue, 18 Oct 2011 17:55:30 -0400
Re: Strength of 63/37 at Various Temperatures	Fox, Ian	Wed, 19 Oct 2011 09:34:02 +0000
Re: SMD Component spacing guideline -- help required	Pete	Wed, 19 Oct 2011 07:56:20 -0500
Re: SMD Component spacing guideline -- help required	Robert Kondner	Wed, 19 Oct 2011 09:40:28 -0400
Re: High Phosphorous content on ENIG PCB	Bob METCALF	Wed, 19 Oct 2011 09:06:48 -0700
Re: Strength of 63/37 at Various Temperatures	Inge Hernefjord	Thu, 20 Oct 2011 18:34:33 +0200
Query on extra NPTH	Nagaraj U	Fri, 21 Oct 2011 16:48:37 +0000
How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]	Fri, 21 Oct 2011 13:31:08 -0500
Discoloration on plated over vias	Ioan Tempea	Fri, 21 Oct 2011 16:26:17 -0400
Re: Discoloration on plated over vias	Vladimir Igoshev. PhD	Fri, 21 Oct 2011 17:46:43 -0400
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Joyce Koo	Fri, 21 Oct 2011 19:16:21 -0400
NTC Friday Element Quiz - the Question	David D. Hillman	Fri, 21 Oct 2011 21:11:10 -0500
Re: NTC Friday Element Quiz - the Question	Giamis, Andy	Fri, 21 Oct 2011 21:27:39 -0500
Re: Discoloration on plated over vias	Inge Hernefjord	Sat, 22 Oct 2011 16:30:31 +0200
Re: Discoloration on plated over vias	Victor Hernandez	Sat, 22 Oct 2011 09:38:54 -0500
Re: Discoloration on plated over vias	Chuck Brummer	Sat, 22 Oct 2011 08:16:59 -0700
Re: NTC Friday Element Quiz - the Question	Bev Christian	Sat, 22 Oct 2011 12:22:52 -0400
Re: High Phosphorous content on ENIG PCB	Bob Landman	Sat, 22 Oct 2011 12:43:50 -0400
Re: Discoloration on plated over vias	Joyce Koo	Sat, 22 Oct 2011 15:49:46 -0400
Re: High Phosphorous content on ENIG PCB	Joyce Koo	Sat, 22 Oct 2011 15:57:20 -0400
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	David D. Hillman	Sat, 22 Oct 2011 17:03:14 -0500
Re: High Phosphorous content on ENIG PCB	Reuven Rokah	Sun, 23 Oct 2011 08:14:55 +0200
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Reuven Rokah	Sun, 23 Oct 2011 11:03:21 +0200
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Inge Hernefjord	Sun, 23 Oct 2011 14:50:17 +0200
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Bev Christian	Sun, 23 Oct 2011 09:48:13 -0400
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Reuven Rokah	Sun, 23 Oct 2011 16:31:16 +0200
Re: Cleaning/Contamination Book	Brian Ellis	Mon, 24 Oct 2011 11:30:19 +0300
Re: Discoloration on plated over vias	Ioan Tempea	Mon, 24 Oct 2011 07:54:05 -0400
Re: Discoloration on plated over vias	Ioan Tempea	Mon, 24 Oct 2011 08:01:43 -0400
Re: NTC Friday Element Quiz - the Answer	David D. Hillman	Mon, 24 Oct 2011 07:16:46 -0500
Re: Discoloration on plated over vias	Stadem, Richard D.	Mon, 24 Oct 2011 08:34:19 -0500
Re: Discoloration on plated over vias	Stadem, Richard D.	Mon, 24 Oct 2011 08:39:57 -0500
Re: Discoloration on plated over vias	Wenger, George M.	Mon, 24 Oct 2011 08:40:52 -0500
Re: NTC Friday Element Quiz - the Answer	Giamis, Andy	Mon, 24 Oct 2011 09:26:12 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Jack Olson	Mon, 24 Oct 2011 09:26:55 -0500
Re: Query on extra NPTH	Pete	Mon, 24 Oct 2011 09:33:21 -0500
Re: Discoloration on plated over vias	Ioan Tempea	Mon, 24 Oct 2011 11:41:10 -0400
Re: Discoloration on plated over vias	Wenger, George M.	Mon, 24 Oct 2011 10:47:45 -0500
Re: Discoloration on plated over vias	vladimir Igoshev	Mon, 24 Oct 2011 16:06:16 +0000
In-Circuit Testing Standards	Doug Schueller	Mon, 24 Oct 2011 20:24:36 +0000
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Inge Hernefjord	Mon, 24 Oct 2011 14:43:18 -0700
Re: In-Circuit Testing Standards	Blair Hogg	Mon, 24 Oct 2011 16:56:02 -0500
SV: [TN] How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Per-Erik Tegehall	Tue, 25 Oct 2011 09:51:00 +0200
Component mass?	Braddock, Iain (UK)	Tue, 25 Oct 2011 12:45:58 +0100
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Tue, 25 Oct 2011 08:08:23 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Jack Olson	Tue, 25 Oct 2011 08:28:56 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Reuven. ROKAH	Tue, 25 Oct 2011 15:40:06 +0200
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Inge Hernefjord	Tue, 25 Oct 2011 17:41:27 +0200
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Goodyear, Patrick	Tue, 25 Oct 2011 15:57:48 +0000
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Ian Hanna	Tue, 25 Oct 2011 12:52:45 -0400
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Tue, 25 Oct 2011 12:37:47 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Tue, 25 Oct 2011 13:08:06 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Phil Bavaro	Tue, 25 Oct 2011 11:10:44 -0700
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Tue, 25 Oct 2011 13:54:03 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Tue, 25 Oct 2011 17:23:43 -0500
Re: How do we determine the Maximum Acceptable Moisture Content (MAMC) for a board?	Stadem, Richard D.	Wed, 26 Oct 2011 07:49:06 -0500
Re: Discoloration on plated over vias	Ioan Tempea	Wed, 26 Oct 2011 12:21:14 -0400
Re: Discoloration on plated over vias	vladimir Igoshev	Wed, 26 Oct 2011 16:42:18 +0000
Re: Discoloration on plated over vias	Stadem, Richard D.	Wed, 26 Oct 2011 11:55:22 -0500
Re: Discoloration on plated over vias	Whittaker, Dewey (EHCOE)	Wed, 26 Oct 2011 10:03:25 -0700
Re: Discoloration on plated over vias	vladimir Igoshev	Wed, 26 Oct 2011 17:08:02 +0000
Re: Discoloration on plated over vias	Ioan Tempea	Wed, 26 Oct 2011 13:27:21 -0400
Plan for IPC APEX EXPO 2012	Gayle Pervos	Wed, 26 Oct 2011 17:41:33 +0000
Re: Discoloration on plated over vias	vladimir Igoshev	Wed, 26 Oct 2011 17:50:16 +0000
Re: Discoloration on plated over vias	Ioan Tempea	Wed, 26 Oct 2011 13:55:29 -0400
Re: Discoloration on plated over vias	vladimir Igoshev	Wed, 26 Oct 2011 18:00:20 +0000
Re: Discoloration on plated over vias	Stadem, Richard D.	Wed, 26 Oct 2011 13:17:51 -0500
Re: Discoloration on plated over vias	Stadem, Richard D.	Wed, 26 Oct 2011 13:19:15 -0500
Re: Discoloration on plated over vias	Wenger, George M.	Wed, 26 Oct 2011 13:33:41 -0500
Re: Discoloration on plated over vias	vladimir Igoshev	Wed, 26 Oct 2011 18:37:26 +0000
Re: Discoloration on plated over vias	Victor Hernandez	Wed, 26 Oct 2011 13:39:10 -0500
Re: Discoloration on plated over vias	Victor Hernandez	Wed, 26 Oct 2011 13:41:46 -0500
Re: Discoloration on plated over vias	Ioan Tempea	Wed, 26 Oct 2011 14:43:47 -0400
Re: Discoloration on plated over vias	Ioan Tempea	Wed, 26 Oct 2011 14:44:44 -0400
Re: Discoloration on plated over vias	Wenger, George M.	Wed, 26 Oct 2011 13:59:57 -0500
Re: Discoloration on plated over vias	Stadem, Richard D.	Wed, 26 Oct 2011 14:00:18 -0500
Delam or Inner Core Bond Enhance Anomaly or something else?	John Balchunas	Thu, 27 Oct 2011 09:56:59 -0500
Re: Delam or Inner Core Bond Enhance Anomaly or something else?	vladimir Igoshev	Thu, 27 Oct 2011 15:30:24 +0000
Re: Delam or Inner Core Bond Enhance Anomaly or something else?	Ian Hanna	Thu, 27 Oct 2011 14:17:21 -0400
Re: Delam or Inner Core Bond Enhance Anomaly or something else?	John Balchunas	Thu, 27 Oct 2011 14:19:40 -0500
ESD packaging material issue	E-Mail Forum Wayne Knapp	Thu, 27 Oct 2011 15:12:47 -0500
Re: ESD packaging material issue	Phil Bavaro	Thu, 27 Oct 2011 13:58:11 -0700
Re: ESD packaging material issue	Douglas Pauls	Thu, 27 Oct 2011 16:11:49 -0500
Re: ESD packaging material issue	Stadem, Richard D.	Thu, 27 Oct 2011 16:26:28 -0500
Re: ESD packaging material issue	Stadem, Richard D.	Thu, 27 Oct 2011 16:26:59 -0500
Re: ESD packaging material issue	Phil Kinner	Thu, 27 Oct 2011 22:41:20 +0100
Re: ESD packaging material issue	Whittaker, Dewey (EHCOE)	Thu, 27 Oct 2011 14:44:22 -0700
Re: ESD packaging material issue	Lum Wee Mei	Fri, 28 Oct 2011 10:50:15 +0800
NTC Friday Element Quiz - the Question	David D. Hillman	Fri, 28 Oct 2011 07:13:45 -0500
maximum height of artifacts above the soldermask	Amol Kane	Fri, 28 Oct 2011 08:45:13 -0400
Re: NTC Friday Element Quiz - the Question	Carroll, Thomas A	Fri, 28 Oct 2011 07:52:40 -0500
Re: maximum height of artifacts above the soldermask	Steve Gregory	Fri, 28 Oct 2011 09:05:37 -0400
Rookie question on RMA fluxes	Ioan Tempea	Fri, 28 Oct 2011 09:07:53 -0400
Re: Rookie question on RMA fluxes	Phil Nutting	Fri, 28 Oct 2011 09:45:00 -0400
Re: Rookie question on RMA fluxes	Amol Kane	Fri, 28 Oct 2011 09:53:24 -0400
Re: Rookie question on RMA fluxes	Robert Kondner	Fri, 28 Oct 2011 09:54:24 -0400
Re: Rookie question on RMA fluxes	Robert Kondner	Fri, 28 Oct 2011 10:08:24 -0400
Re: Rookie question on RMA fluxes	Wenger, George M.	Fri, 28 Oct 2011 09:18:13 -0500
Re: Rookie question on RMA fluxes	Whittaker, Dewey (EHCOE)	Fri, 28 Oct 2011 07:25:04 -0700
Re: maximum height of artifacts above the soldermask	Amol Kane	Fri, 28 Oct 2011 10:34:57 -0400
Re: Rookie question on RMA fluxes	Bob METCALF	Fri, 28 Oct 2011 08:35:45 -0700
Re: Rookie question on RMA fluxes	Phil Nutting	Fri, 28 Oct 2011 11:49:36 -0400
Re: Rookie question on RMA fluxes	Larry Dzaugis	Fri, 28 Oct 2011 10:54:10 -0500
Re: Rookie question on RMA fluxes	Karen Tellefsen	Fri, 28 Oct 2011 12:01:48 -0400
Re: Rookie question on RMA fluxes	Karen Tellefsen	Fri, 28 Oct 2011 12:03:29 -0400
Re: Rookie question on RMA fluxes	Douglas Pauls	Fri, 28 Oct 2011 11:28:13 -0500
Re: Rookie question on RMA fluxes	Ioan Tempea	Fri, 28 Oct 2011 12:42:26 -0400
FW: [TN] Rookie question on RMA fluxes	Whittaker, Dewey (EHCOE)	Fri, 28 Oct 2011 10:24:53 -0700
Re: FW: [TN] Rookie question on RMA fluxes	Phil Bavaro	Fri, 28 Oct 2011 11:03:30 -0700
Re: NTC Friday Element Quiz - the Question	Phil Bavaro	Fri, 28 Oct 2011 11:20:10 -0700
Re: FW: [TN] Rookie question on RMA fluxes	Ian Hanna	Fri, 28 Oct 2011 14:33:36 -0400
Re: NTC Friday Element Quiz - the Question	Blair Hogg	Fri, 28 Oct 2011 13:55:14 -0500
Re: Rookie question on RMA fluxes	Robert DeQuattro	Fri, 28 Oct 2011 19:16:03 +0000
Whiskers from Immersion Tin Finish?	Jack Olson	Fri, 28 Oct 2011 15:19:24 -0500
Re: Whiskers from Immersion Tin Finish?	Joyce Koo	Fri, 28 Oct 2011 16:52:42 -0400
Re: maximum height of artifacts above the soldermask	Phil Bavaro	Fri, 28 Oct 2011 13:55:45 -0700
Re: maximum height of artifacts above the soldermask	Inge Hernefjord	Sat, 29 Oct 2011 08:19:35 +0200
Re: Whiskers from Immersion Tin Finish?	Terry Munson	Sat, 29 Oct 2011 10:10:08 -0400
Re: NTC Friday Element Quiz - the Question	Bev Christian	Sat, 29 Oct 2011 18:59:20 -0400
Re: NTC Friday Element Quiz - the Question	Larry Dzaugis	Sat, 29 Oct 2011 18:13:27 -0500
Re: ESD packaging material issue	Grunde Gjertsen	Mon, 31 Oct 2011 07:10:24 +0000
Re: Whiskers from Immersion Tin Finish?	Dennis Fritz	Mon, 31 Oct 2011 08:14:38 -0400
Re: Whiskers from Immersion Tin Finish?	Steve Gregory	Mon, 31 Oct 2011 08:42:45 -0400
Re: FW: [TN] Rookie question on RMA fluxes	Whittaker, Dewey (EHCOE)	Mon, 31 Oct 2011 06:34:22 -0700
Re: maximum height of artifacts above the soldermask	Stadem, Richard D.	Mon, 31 Oct 2011 08:49:57 -0500
Re: maximum height of artifacts above the soldermask	Steve Gregory	Mon, 31 Oct 2011 10:00:15 -0400
Re: ESD packaging material issue	Stadem, Richard D.	Mon, 31 Oct 2011 09:03:33 -0500
Re: Whiskers from Immersion Tin Finish?	Jack Olson	Mon, 31 Oct 2011 09:12:16 -0500
Re: Rookie question on RMA fluxes	Garcia, Rigo (GSFC-300.0)[MANTECH SRS TECHNOLOGIES]	Mon, 31 Oct 2011 09:54:04 -0500
Re: ESD packaging material issue	Knapp, Wayne B	Mon, 31 Oct 2011 10:01:45 -0500
Re: Rookie question on RMA fluxes	Stadem, Richard D.	Mon, 31 Oct 2011 10:34:21 -0500
Re: Rookie question on RMA fluxes	Goodyear, Patrick	Mon, 31 Oct 2011 15:43:39 +0000
Re: Whiskers from Immersion Tin Finish?	Dennis Fritz	Mon, 31 Oct 2011 11:54:39 -0400
Re: Whiskers from Immersion Tin Finish?	Steve Gregory	Mon, 31 Oct 2011 11:59:32 -0400
Re: Rookie question on RMA fluxes	Steve Gregory	Mon, 31 Oct 2011 12:02:33 -0400
Re: Rookie question on RMA fluxes	Whittaker, Dewey (EHCOE)	Mon, 31 Oct 2011 09:07:44 -0700
Re: Rookie question on RMA fluxes	Whittaker, Dewey (EHCOE)	Mon, 31 Oct 2011 09:17:44 -0700
Re: Rookie question on RMA fluxes	Karen Tellefsen	Mon, 31 Oct 2011 12:25:36 -0400
Re: Rookie question on RMA fluxes	Phil Nutting	Mon, 31 Oct 2011 12:36:33 -0400
Re: Rookie question on RMA fluxes	Goodyear, Patrick	Mon, 31 Oct 2011 16:42:16 +0000
Re: Rookie question on RMA fluxes	Stadem, Richard D.	Mon, 31 Oct 2011 11:43:05 -0500
Re: Whiskers from Immersion Tin Finish?	Dennis Fritz	Mon, 31 Oct 2011 12:49:01 -0400
Re: Rookie question on RMA fluxes	Larry Dzaugis	Mon, 31 Oct 2011 11:53:56 -0500
Re: Rookie question on RMA fluxes	Robert Kondner	Mon, 31 Oct 2011 13:04:24 -0400
Re: Rookie question on RMA fluxes	Karen Tellefsen	Mon, 31 Oct 2011 13:13:12 -0400
Re: Rookie question on RMA fluxes	Goodyear, Patrick	Mon, 31 Oct 2011 18:01:26 +0000
Re: FW: [TN] Rookie question on RMA fluxes	Inge Hernefjord	Mon, 31 Oct 2011 20:01:10 +0100
Re: NTC Friday Element Quiz - the Question	Goodyear, Patrick	Mon, 31 Oct 2011 19:49:03 +0000
Re: NTC Friday Element Quiz - the Question	David D. Hillman	Mon, 31 Oct 2011 15:21:14 -0500
Re: Whiskers from Immersion Tin Finish?	David D. Hillman	Mon, 31 Oct 2011 15:27:13 -0500
Re: Whiskers from Immersion Tin Finish?	David D. Hillman	Mon, 31 Oct 2011 15:32:31 -0500
Re: NTC Friday Element Quiz - the Question	Stadem, Richard D.	Mon, 31 Oct 2011 15:34:53 -0500
Re: NTC Friday Element Quiz - the Question	Leland Woodall	Mon, 31 Oct 2011 20:37:45 +0000
Re: NTC Friday Element Quiz - the Question	Goodyear, Patrick	Mon, 31 Oct 2011 21:32:10 +0000
Re: NTC Friday Element Quiz - the Question	Stadem, Richard D.	Mon, 31 Oct 2011 16:34:27 -0500
Re: NTC Friday Element Quiz - the Question	Phil Bavaro	Mon, 31 Oct 2011 15:25:40 -0700
Re: NTC Friday Element Quiz - the Question	Bev Christian	Mon, 31 Oct 2011 19:31:01 -0400
Re: NTC Friday Element Quiz - the Question	Goodyear, Patrick	Mon, 31 Oct 2011 23:33:54 +0000
NTC Friday Element Quiz - the Answer	David D. Hillman	Mon, 31 Oct 2011 19:20:33 -0500
Re: NTC Friday Element Quiz - the Answer	Bev Christian	Mon, 31 Oct 2011 21:09:08 -0400
Re: Rookie question on RMA fluxes	Richard Kraszewski	Mon, 31 Oct 2011 21:17:28 -0500

ATOM RSS1 RSS2

LISTSERV.IPC.ORG

TECHNET Archives

October 2011

TechNet@IPC.ORG

Subject

From

Date