TECHNET Archives

July 2010

TechNet@IPC.ORG
Options: Hide Table of Contents

李义 (2 Messages)
<> (7 Messages)
Ahne Oosterhof (2 Messages)
Al Onderick (1 Message)
Alasdair Naisbitt (2 Messages)
Ashok Dhawan (2 Messages)
Bev Christian (17 Messages)
Blair Hogg (3 Messages)
Bob Landman (6 Messages)
Brad Saunders (10 Messages)
Brian Ellis (8 Messages)
Brooks, Bill (4 Messages)
Bruce Tostevin (2 Messages)
Bryon Boone (1 Message)
Carroll, Thomas A (1 Message)
Cedric ORAIN (4 Messages)
Charming Chan (1 Message)
Chris Mahanna (6 Messages)
Chuck Brummer (3 Messages)
colin mcvean (3 Messages)
Croslin, Robert (2 Messages)
Dan Skweres (2 Messages)
Darren Hitchcock (1 Message)
Dave Connitt (2 Messages)
David D. Hillman (15 Messages)
David Hoover (4 Messages)
David R1 Nelson (3 Messages)
Dharma Kemp-Bresett (5 Messages)
Douglas Pauls (16 Messages)
Drew meyer (15 Messages)
Dwight Mattix (3 Messages)
Ed Popielarski (8 Messages)
Eldon Sanders (1 Message)
Eric Christison (6 Messages)
Forrester, Michael (H USA) (3 Messages)
Fox, Ian (1 Message)
Frank Kriesch (1 Message)
Gene Felder (1 Message)
Genny Gibbard (2 Messages)
Gerald Gagnon (1 Message)
Glidden, Kevin (3 Messages)
Graham Collins (4 Messages)
Graham Naisbitt (3 Messages)
Gregg Owens (2 Messages)
Grunde Gjertsen (1 Message)
Gumpert, Ben (2 Messages)
Guy Ramsey (2 Messages)
Hart, Dale L CTR USAF AFMC AFRL/RXSA (2 Messages)
harvey (1 Message)
Hetal Shah (2 Messages)
Ian Hanna (6 Messages)
Inge (49 Messages)
Ioan Tempea (3 Messages)
J W (1 Message)
Jack Olson (6 Messages)
jan chen (2 Messages)
jan (1 Message)
Jeremias, Michael (1 Message)
Jim Henderson (1 Message)
Joe Macko (1 Message)
John Burke (5 Messages)
Joyce Koo (19 Messages)
Juan T. Marugan (2 Messages)
Kane, Joseph E (US SSA) (4 Messages)
Karl Sauter (3 Messages)
Ken Barton (2 Messages)
Ken Bloomquist (10 Messages)
Ken Harp (2 Messages)
Kenneth Wood (5 Messages)
Kim Sterling (1 Message)
Kinner, Phil (1 Message)
Krishnan (Radhakrishnan) Chezhian (1 Message)
Laroe, Michael (3 Messages)
Lars Wallin (1 Message)
Lee parker (1 Message)
Leif Erik Laerum (3 Messages)
Leif Laerum (1 Message)
Leland Woodall (1 Message)
Linda Langley (3 Messages)
Lon Weffers (1 Message)
Louis Hart (1 Message)
Luan Nguyen (1 Message)
Luis A. Gallegos (2 Messages)
Lum Wee Mei (2 Messages)
Marc Bituagan (1 Message)
Matthias Mansfeld (1 Message)
McGlaughlin, Jeffrey A (2 Messages)
Mel Parrish (1 Message)
Mike Bogden (1 Message)
Mike Buetow (1 Message)
Mike Fenner (7 Messages)
Mike Laroe (1 Message)
Mike Sewell (2 Messages)
MikeyMike (1 Message)
Neifer, Gebhard (2 Messages)
Neil Maloney (1 Message)
Nigel Burtt (9 Messages)
Nowland, Russell Howard (Russell) (1 Message)
Ofer Cohen-QM (1 Message)
Paul Edwards (8 Messages)
Paul Reid (14 Messages)
Pete Houwen (3 Messages)
Phil Nutting (3 Messages)
Phillip Bavaro (3 Messages)
Post, Scott E (2 Messages)
R Sedlak (5 Messages)
Rainer Taube (1 Message)
Randall L Bock (2 Messages)
Reuven Rokah (7 Messages)
Richard D. Krug (2 Messages)
Rob Strecker (1 Message)
Robert Kondner (7 Messages)
Roberts, Jon (SA-1) (6 Messages)
Roger Mack (2 Messages)
Shean Dalton (1 Message)
Simon Huetter (1 Message)
Stephen Pierce (3 Messages)
Steve Gregory (7 Messages)
Steve Kelly (1 Message)
Steve Smith (2 Messages)
Steven Creswick (5 Messages)
Sue Powers-Hartman (2 Messages)
Syed Ahmad (3 Messages)
Tan Geok Ang (2 Messages)
Thayer, Wayne - IIW (5 Messages)
Thomas E Kemp (1 Message)
Toby Carrier (1 Message)
Tontis, Theodore (2 Messages)
Tony Liu (1 Message)
Upton, Shawn (1 Message)
Victor Hernandez (5 Messages)
vladimir Igoshev (3 Messages)
Walt Manchin (1 Message)
Werner Engelmaier (26 Messages)
Whittaker, Dewey (EHCOE) (19 Messages)
Winning (1 Message)
Wrobel, Clayton (SA-1) (1 Message)

Subject

From Sorted by Sender, Alphabetically

Date
New Sender 李义
Re: Cracked 2208 smt resistor end joint
李义
Mon, 5 Jul 2010 15:11:28 +0800
Re: Single PCB back drilling
李义
Fri, 2 Jul 2010 09:38:58 +0800
New Sender <>
Re: Hand Soldering on Polyimide Rigid-Flex Assemblies
<>
Mon, 26 Jul 2010 11:52:13 -0400
Re: NTC Friday Element Quiz
<>
Fri, 9 Jul 2010 16:33:50 +0000
Re: NTC: Friday quiz
<>
Fri, 9 Jul 2010 13:03:57 -0500
Re: NTC: Friday quiz14
<>
Fri, 23 Jul 2010 15:43:19 +0000
PCB storage
<>
Thu, 15 Jul 2010 11:27:31 +0200
Re: PCB storage
<>
Thu, 15 Jul 2010 16:50:03 +0200
Re: PCB storage
<>
Fri, 16 Jul 2010 16:15:14 +0200
New Sender Ahne Oosterhof
Re: 0201 footprint requirements
Ahne Oosterhof
Wed, 14 Jul 2010 19:52:25 -0700
Re: 0201 footprint requirements
Ahne Oosterhof
Tue, 27 Jul 2010 10:20:53 -0700
New Sender Al Onderick
Re: Pass Fail criteria for HATS tests
Al Onderick
Tue, 13 Jul 2010 10:01:06 -0500
New Sender Alasdair Naisbitt
Re: NTC Friday Element Quiz - The Question
Alasdair Naisbitt
Fri, 16 Jul 2010 17:47:58 +0100
Re: NTC: Friday quiz 13
Alasdair Naisbitt
Mon, 19 Jul 2010 14:30:42 +0100
New Sender Ashok Dhawan
QFN : what is minimum solder thickness to rework
Ashok Dhawan
Mon, 5 Jul 2010 11:02:21 -0500
Re: QFN : what is minimum solder thickness to rework
Ashok Dhawan
Mon, 5 Jul 2010 22:50:08 -0500
New Sender Bev Christian
Re: Baking in tape & reel
Bev Christian
Wed, 21 Jul 2010 10:25:38 -0400
Re: Baking in tape & reel
Bev Christian
Wed, 21 Jul 2010 11:22:53 -0400
Re: BAKING OF PWB QUESTION
Bev Christian
Tue, 13 Jul 2010 12:29:40 -0400
Re: BAKING OF PWB QUESTION
Bev Christian
Wed, 14 Jul 2010 10:35:25 -0400
Re: BAKING OF PWB QUESTION
Bev Christian
Wed, 14 Jul 2010 13:15:54 -0400
Re: Departure
Bev Christian
Thu, 8 Jul 2010 17:21:58 -0400
Re: NTC Friday Element Quiz
Bev Christian
Fri, 9 Jul 2010 14:30:35 -0400
Re: NTC Friday Element Quiz - The Question
Bev Christian
Fri, 30 Jul 2010 08:16:44 -0400
Re: NTC Friday Element Quiz - The Question
Bev Christian
Fri, 30 Jul 2010 08:45:02 -0400
Re: NTC Friday Element Quiz - The Question
Bev Christian
Fri, 30 Jul 2010 08:58:40 -0400
Re: NTC Friday Element Quiz The Question
Bev Christian
Fri, 2 Jul 2010 10:05:54 -0400
Re: Plasma Chamber Maintenance
Bev Christian
Fri, 30 Jul 2010 09:06:04 -0400
Removing gold and leaving nickel unaffected
Bev Christian
Mon, 19 Jul 2010 14:38:06 -0400
Re: Removing gold and leaving nickel unaffected
Bev Christian
Mon, 19 Jul 2010 16:44:22 -0400
Re: Removing gold and leaving nickel unaffected
Bev Christian
Mon, 19 Jul 2010 17:57:12 -0400
Re: The Queen's Visit to RIM
Bev Christian
Mon, 5 Jul 2010 11:49:40 -0400
Re: [SPAM] - Re: [TN] NTC Friday Element Quiz - Found word(s) list error in the Text body
Bev Christian
Fri, 9 Jul 2010 14:54:47 -0400
New Sender Blair Hogg
Re: Net List Discipline
Blair Hogg
Thu, 1 Jul 2010 13:50:55 -0500
Re: Net List Discipline
Blair Hogg
Thu, 1 Jul 2010 13:55:12 -0500
Re: NTC: Friday quiz 13
Blair Hogg
Fri, 30 Jul 2010 08:01:42 -0500
New Sender Bob Landman
Re: Bright tin
Bob Landman
Sat, 3 Jul 2010 15:21:54 -0400
Re: Bright tin
Bob Landman
Sat, 3 Jul 2010 15:43:30 -0400
Re: Departure
Bob Landman
Fri, 9 Jul 2010 17:13:25 -0400
Interposer for SAC BGA
Bob Landman
Fri, 9 Jul 2010 10:05:33 -0400
Re: Interposer for SAC BGA
Bob Landman
Fri, 9 Jul 2010 17:00:35 -0400
Re: The Queen's Visit to RIM
Bob Landman
Mon, 5 Jul 2010 18:01:49 -0400
New Sender Brad Saunders
Re: 0201 footprint requirements
Brad Saunders
Tue, 13 Jul 2010 15:58:46 -0400
Re: 0201 footprint requirements
Brad Saunders
Mon, 26 Jul 2010 22:20:49 -0400
Re: 0201 footprint requirements
Brad Saunders
Wed, 28 Jul 2010 08:27:57 -0400
Re: Hand Soldering on Polyimide Rigid-Flex Assemblies
Brad Saunders
Mon, 26 Jul 2010 21:29:35 -0400
Re: Interposer for SAC BGA
Brad Saunders
Tue, 13 Jul 2010 15:31:59 -0400
Re: Non-Hygroscopic" flex circuit material
Brad Saunders
Mon, 26 Jul 2010 20:56:30 -0400
Re: SFF-8087 PCB (Also call Min SAS)---Really need you help
Brad Saunders
Tue, 13 Jul 2010 15:43:54 -0400
Re: SFF-8087 PCB (Also call Min SAS)---Really need you help
Brad Saunders
Tue, 13 Jul 2010 16:07:38 -0400
Re: SMT PAD Current Capability
Brad Saunders
Mon, 26 Jul 2010 22:08:13 -0400
Re: solder joint height
Brad Saunders
Mon, 26 Jul 2010 21:55:55 -0400
New Sender Brian Ellis
Net List Discipline
Brian Ellis
Thu, 1 Jul 2010 08:38:41 +0300
Re: Net List Discipline
Brian Ellis
Thu, 1 Jul 2010 10:28:33 +0300
Re: non-functional pad removal
Brian Ellis
Tue, 13 Jul 2010 08:45:21 +0300
Re: NTC: Friday quiz 12
Brian Ellis
Fri, 9 Jul 2010 16:37:53 +0300
Re: NTC: Friday quiz 13
Brian Ellis
Mon, 19 Jul 2010 07:24:33 +0300
Re: NTC: Friday quiz14
Brian Ellis
Fri, 23 Jul 2010 08:24:33 +0300
NTC: Photos
Brian Ellis
Wed, 21 Jul 2010 18:52:11 +0300
Re: NTC: Photos
Brian Ellis
Thu, 22 Jul 2010 15:33:30 +0300
New Sender Brooks, Bill
0201 footprint requirements
Brooks, Bill
Wed, 7 Jul 2010 11:37:37 -0700
Re: 0201 footprint requirements
Brooks, Bill
Thu, 8 Jul 2010 10:09:41 -0700
Re: 0201 footprint requirements
Brooks, Bill
Tue, 27 Jul 2010 09:43:19 -0700
Re: SMT PAD Current Capability
Brooks, Bill
Thu, 22 Jul 2010 10:03:46 -0700
New Sender Bruce Tostevin
Re: NTC: Friday quiz 12
Bruce Tostevin
Fri, 9 Jul 2010 12:12:10 -0400
Re: NTC: Friday quiz14
Bruce Tostevin
Fri, 23 Jul 2010 11:05:11 -0400
New Sender Bryon Boone
UHV Soldering
Bryon Boone
Fri, 30 Jul 2010 16:23:45 -0400
New Sender Carroll, Thomas A
Re: NTC: Friday quiz 12
Carroll, Thomas A
Fri, 9 Jul 2010 07:19:33 -0500
New Sender Cedric ORAIN
Re: Bright tin
Cedric ORAIN
Thu, 1 Jul 2010 10:40:02 +0200
Re: Bright tin
Cedric ORAIN
Thu, 1 Jul 2010 14:35:09 +0200
Re: FW: Failing leds due to conformal coating?
Cedric ORAIN
Thu, 15 Jul 2010 16:38:29 +0200
Re: Interposer for SAC BGA
Cedric ORAIN
Fri, 9 Jul 2010 16:23:12 +0200
New Sender Charming Chan
Board thickness tolerance on IPC spec?
Charming Chan
Wed, 7 Jul 2010 11:42:41 -0400
New Sender Chris Mahanna
Re: BAKING OF PWB QUESTION
Chris Mahanna
Wed, 14 Jul 2010 10:29:02 -0400
Re: BAKING OF PWB QUESTION
Chris Mahanna
Wed, 14 Jul 2010 12:33:01 -0400
Re: BAKING OF PWB QUESTION
Chris Mahanna
Wed, 14 Jul 2010 12:41:45 -0400
Re: Bombsite PCB drill
Chris Mahanna
Fri, 2 Jul 2010 07:20:35 -0400
Re: Single PCB backdrilling
Chris Mahanna
Thu, 1 Jul 2010 09:33:16 -0400
Re: Single PCB backdrilling
Chris Mahanna
Thu, 1 Jul 2010 13:04:18 -0400
New Sender Chuck Brummer
Re: Bombsite PCB drill
Chuck Brummer
Thu, 1 Jul 2010 15:25:51 -0700
Re: NTC Friday Element Quiz
Chuck Brummer
Fri, 9 Jul 2010 07:53:13 -0700
Re: NTC. World Cup
Chuck Brummer
Wed, 7 Jul 2010 14:01:47 -0700
New Sender colin mcvean
Friday quiz 14
colin mcvean
Fri, 23 Jul 2010 00:18:40 +0000
Re: FW: Inventory of CNSE Property
colin mcvean
Fri, 30 Jul 2010 00:04:49 +0000
Re: PCB Discoloration
colin mcvean
Fri, 30 Jul 2010 08:38:24 +0000
New Sender Croslin, Robert
Re: Friday quiz 14
Croslin, Robert
Fri, 23 Jul 2010 14:40:20 -0400
Re: Obsolete Part Cross-reference Resource
Croslin, Robert
Fri, 16 Jul 2010 10:42:37 -0400
New Sender Dan Skweres
Re: Non-Hygroscopic" flex circuit material
Dan Skweres
Mon, 26 Jul 2010 15:24:41 -0400
Re: PCB Discoloration
Dan Skweres
Fri, 30 Jul 2010 12:59:16 -0400
New Sender Darren Hitchcock
Re: Board thickness tolerance on IPC spec?
Darren Hitchcock
Thu, 8 Jul 2010 11:44:42 -0500
New Sender Dave Connitt
Re: Board thickness tolerance on IPC spec?
Dave Connitt
Thu, 8 Jul 2010 10:10:00 -0400
Laminate and prepreg question
Dave Connitt
Fri, 23 Jul 2010 10:38:29 -0400
New Sender David D. Hillman
Re: BAKING OF PWB QUESTION
David D. Hillman
Wed, 14 Jul 2010 09:38:53 -0500
Re: Interposer for SAC BGA
David D. Hillman
Fri, 9 Jul 2010 10:40:49 -0500
Re: Ni in Eutectic SnPb solder
David D. Hillman
Wed, 7 Jul 2010 16:17:19 -0500
NTC Friday Element Quiz
David D. Hillman
Fri, 9 Jul 2010 07:39:44 -0500
NTC Friday Element Quiz - The Answer
David D. Hillman
Mon, 19 Jul 2010 07:04:08 -0500
NTC Friday Element Quiz - The Answer
David D. Hillman
Fri, 30 Jul 2010 13:10:23 -0500
NTC Friday Element Quiz - The Question
David D. Hillman
Fri, 16 Jul 2010 07:39:05 -0500
NTC Friday Element Quiz - The Question
David D. Hillman
Fri, 30 Jul 2010 07:08:58 -0500
NTC Friday Element Quiz Answer
David D. Hillman
Fri, 9 Jul 2010 14:05:26 -0500
NTC Friday Element Quiz The Question
David D. Hillman
Fri, 2 Jul 2010 08:59:10 -0500
NTC Friday Element Quiz The Question
David D. Hillman
Fri, 2 Jul 2010 15:00:33 -0500
Re: NTC: Friday quiz 11
David D. Hillman
Fri, 2 Jul 2010 10:35:39 -0500
Re: silver solders and thermal fatigue resistance
David D. Hillman
Thu, 15 Jul 2010 07:17:54 -0500
Re: solder joint height
David D. Hillman
Tue, 20 Jul 2010 08:37:27 -0500
Re: Underfill as a Remedy for Electro Migration?
David D. Hillman
Thu, 8 Jul 2010 07:50:59 -0500
New Sender David Hoover
New Definition for the Term "P Charts"
David Hoover
Tue, 27 Jul 2010 20:25:24 -0700
Re: New Definition for the Term "P Charts"
David Hoover
Wed, 28 Jul 2010 07:40:04 -0700
Re: PCB Discoloration
David Hoover
Fri, 30 Jul 2010 06:27:48 -0700
Re: PCB Discoloration
David Hoover
Fri, 30 Jul 2010 08:38:47 -0700
New Sender David R1 Nelson
Ni in Eutectic SnPb solder
David R1 Nelson
Wed, 7 Jul 2010 14:58:56 -0500
Re: Ni in Eutectic SnPb solder
David R1 Nelson
Wed, 7 Jul 2010 15:33:40 -0500
Re: Underfill as a Remedy for Electro Migration?
David R1 Nelson
Wed, 14 Jul 2010 14:50:11 -0500
New Sender Dharma Kemp-Bresett
Re: NTC: Friday quiz 12
Dharma Kemp-Bresett
Fri, 9 Jul 2010 12:37:21 -0400
Re: NTC: Friday quiz 12
Dharma Kemp-Bresett
Fri, 9 Jul 2010 12:40:08 -0400
Re: NTC: Friday quiz 12
Dharma Kemp-Bresett
Fri, 9 Jul 2010 12:46:55 -0400
Re: NTC: Friday quiz 13
Dharma Kemp-Bresett
Mon, 19 Jul 2010 09:31:13 -0400
Re: NTC: Friday quiz14
Dharma Kemp-Bresett
Fri, 23 Jul 2010 08:46:05 -0400
New Sender Douglas Pauls
Re: Good News about the Canadian Chemicals Management Plan
Douglas Pauls
Thu, 1 Jul 2010 10:22:17 -0500
Re: NTC Friday Element Quiz
Douglas Pauls
Fri, 9 Jul 2010 13:24:17 -0500
Re: NTC Friday Element Quiz - The Question
Douglas Pauls
Fri, 30 Jul 2010 07:20:23 -0500
Re: NTC Friday Element Quiz - The Question
Douglas Pauls
Fri, 30 Jul 2010 07:30:24 -0500
Re: NTC Friday Element Quiz - The Question
Douglas Pauls
Fri, 30 Jul 2010 07:38:53 -0500
Re: NTC Friday Element Quiz - The Question
Douglas Pauls
Fri, 30 Jul 2010 07:57:49 -0500
Re: NTC Friday Element Quiz The Question
Douglas Pauls
Fri, 2 Jul 2010 10:35:09 -0500
Re: NTC: Friday quiz 11
Douglas Pauls
Wed, 7 Jul 2010 07:35:14 -0500
Re: NTC: Friday quiz 13
Douglas Pauls
Fri, 30 Jul 2010 07:00:57 -0500
Plasma Chamber Maintenance
Douglas Pauls
Fri, 30 Jul 2010 08:01:03 -0500
Re: Plasma Chamber Maintenance
Douglas Pauls
Fri, 30 Jul 2010 09:51:44 -0500
Re: Underfill as a Remedy for Electro Migration?
Douglas Pauls
Thu, 8 Jul 2010 07:01:06 -0500
Re: Underfill as a Remedy for Electro Migration?
Douglas Pauls
Thu, 8 Jul 2010 07:11:38 -0500
Re: Underfill as a Remedy for Electro Migration?
Douglas Pauls
Thu, 8 Jul 2010 07:45:55 -0500
Re: Underfill as a Remedy for Electro Migration?
Douglas Pauls
Thu, 8 Jul 2010 09:28:55 -0500
Re: Underfill as a Remedy for Electro Migration?
Douglas Pauls
Wed, 14 Jul 2010 14:42:33 -0500
New Sender Drew meyer
Re: Friday quiz 14
Drew meyer
Fri, 23 Jul 2010 13:18:15 -0500
Re: NTC Friday Element Quiz
Drew meyer
Fri, 9 Jul 2010 08:34:15 -0500
Re: NTC Friday Element Quiz - The Question
Drew meyer
Fri, 16 Jul 2010 12:53:10 -0500
Re: NTC: Friday quiz 11
Drew meyer
Thu, 8 Jul 2010 06:49:05 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 06:50:19 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 08:21:34 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 11:36:55 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 11:41:38 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 11:51:50 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 13:33:37 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 13:43:17 -0500
Re: NTC: Friday quiz 12
Drew meyer
Fri, 9 Jul 2010 14:30:31 -0500
Re: NTC: Friday quiz 13
Drew meyer
Mon, 19 Jul 2010 07:30:46 -0500
Re: NTC: Friday quiz 13
Drew meyer
Mon, 19 Jul 2010 09:44:45 -0500
Re: NTC: Friday quiz 13
Drew meyer
Mon, 19 Jul 2010 10:31:50 -0500
New Sender Dwight Mattix
Re: Mica and heat sink slug and TO-220
Dwight Mattix
Thu, 15 Jul 2010 21:49:29 -0700
Re: Question about FR4 Curing
Dwight Mattix
Tue, 6 Jul 2010 08:33:45 -0700
Re: Single PCB back drilling
Dwight Mattix
Fri, 2 Jul 2010 10:11:54 -0700
New Sender Ed Popielarski
Re: 答复: [TN] OSP Coating
Ed Popielarski
Mon, 19 Jul 2010 09:22:42 -0700
Re: BAKING OF PWB QUESTION
Ed Popielarski
Tue, 13 Jul 2010 09:46:41 -0700
Bombsite PCB drill
Ed Popielarski
Thu, 1 Jul 2010 14:33:05 -0700
Re: Bombsite PCB drill
Ed Popielarski
Thu, 1 Jul 2010 15:29:56 -0700
Re: Friday quiz 14
Ed Popielarski
Fri, 23 Jul 2010 08:16:35 -0700
Re: NTC Friday Element Quiz
Ed Popielarski
Fri, 9 Jul 2010 09:23:18 -0700
Wave soldering compliant pins
Ed Popielarski
Tue, 13 Jul 2010 09:23:48 -0700
Re: [SPAM] - Re: [TN] NTC Friday Element Quiz - Found word(s) list error in the Text body
Ed Popielarski
Fri, 9 Jul 2010 11:52:55 -0700
New Sender Eldon Sanders
Cracked 2208 smt resistor end joint
Eldon Sanders
Fri, 2 Jul 2010 18:31:15 -0500
New Sender Eric Christison
Re: Hybrid precap q
Eric Christison
Wed, 7 Jul 2010 17:34:45 +0100
Re: NTC Friday Element Quiz The Question
Eric Christison
Fri, 2 Jul 2010 15:26:25 +0100
Re: NTC Friday Element Quiz The Question
Eric Christison
Fri, 2 Jul 2010 16:17:09 +0100
Re: NTC Friday Element Quiz The Question
Eric Christison
Fri, 2 Jul 2010 16:29:18 +0100
Question about FR4 Curing
Eric Christison
Fri, 2 Jul 2010 16:12:27 +0100
Re: Question about FR4 Curing
Eric Christison
Fri, 2 Jul 2010 17:10:08 +0100
New Sender Forrester, Michael (H USA)
Masking to Protect Solder Pads During Teflon Coating Process
Forrester, Michael (H USA)
Fri, 2 Jul 2010 17:01:50 -0400
SMT PAD Current Capability
Forrester, Michael (H USA)
Tue, 20 Jul 2010 11:34:24 -0400
Re: SMT PAD Current Capability
Forrester, Michael (H USA)
Tue, 20 Jul 2010 12:14:51 -0400
New Sender Fox, Ian
Re: NTC Friday Element Quiz The Question
Fox, Ian
Mon, 5 Jul 2010 08:24:00 +0100
New Sender Frank Kriesch
Re: PCB storage
Frank Kriesch
Fri, 16 Jul 2010 09:49:45 +0200
New Sender Gene Felder
Re: ESD Mat Standards
Gene Felder
Thu, 8 Jul 2010 09:48:37 -0700
New Sender Genny Gibbard
Carbon Emissions
Genny Gibbard
Thu, 8 Jul 2010 11:37:44 -0600
Re: Obsolete Part Cross-reference Resource
Genny Gibbard
Fri, 16 Jul 2010 14:45:40 -0600
New Sender Gerald Gagnon
Re: non-functional pad removal
Gerald Gagnon
Tue, 13 Jul 2010 11:36:23 -0400
New Sender Glidden, Kevin
silver solders and thermal fatigue resistance
Glidden, Kevin
Wed, 14 Jul 2010 13:24:47 -0400
Re: silver solders and thermal fatigue resistance
Glidden, Kevin
Wed, 14 Jul 2010 14:56:35 -0400
Re: silver solders and thermal fatigue resistance
Glidden, Kevin
Fri, 16 Jul 2010 09:29:55 -0400
New Sender Graham Collins
Re: Frida quiz 13
Graham Collins
Tue, 20 Jul 2010 07:30:23 -0300
Re: Friday quiz 14
Graham Collins
Fri, 23 Jul 2010 14:10:35 -0300
Re: NTC: Friday quiz 12
Graham Collins
Fri, 9 Jul 2010 13:33:22 -0300
Re: NTC: Friday quiz 12
Graham Collins
Fri, 9 Jul 2010 14:00:46 -0300
New Sender Graham Naisbitt
Re: NTC Friday Element Quiz - The Question
Graham Naisbitt
Fri, 16 Jul 2010 18:08:33 +0100
Re: NTC: Photos
Graham Naisbitt
Thu, 22 Jul 2010 12:41:43 +0100
Re: Underfill as a Remedy for Electro Migration?
Graham Naisbitt
Thu, 8 Jul 2010 15:09:07 +0100
New Sender Gregg Owens
Re: Liquid Solder Mask for Etch-Cuts exposed to Wave
Gregg Owens
Wed, 28 Jul 2010 13:03:24 -0700
Re: Silk Screen Ink Pen
Gregg Owens
Fri, 2 Jul 2010 11:56:07 -0700
New Sender Grunde Gjertsen
Re: Board thickness tolerance on IPC spec?
Grunde Gjertsen
Thu, 8 Jul 2010 08:39:33 +0200
New Sender Gumpert, Ben
Re: EXTERNAL: Re: [TN] NTC Friday Element Quiz The Question
Gumpert, Ben
Tue, 6 Jul 2010 07:11:56 -0400
Re: QFN pads design-QPI-3
Gumpert, Ben
Wed, 7 Jul 2010 06:55:24 -0400
New Sender Guy Ramsey
Re: Question about FR4 Curing
Guy Ramsey
Fri, 2 Jul 2010 11:40:18 -0400
Re: Question about FR4 Curing
Guy Ramsey
Tue, 6 Jul 2010 08:53:14 -0400
New Sender Hart, Dale L CTR USAF AFMC AFRL/RXSA
solder joint height
Hart, Dale L CTR USAF AFMC AFRL/RXSA
Tue, 20 Jul 2010 09:23:32 -0400
Re: solder joint height
Hart, Dale L CTR USAF AFMC AFRL/RXSA
Tue, 20 Jul 2010 12:51:02 -0400
New Sender harvey
Re: Non-Hygroscopic" flex circuit material
harvey
Mon, 26 Jul 2010 13:03:51 -0700
New Sender Hetal Shah
Re: Conformal Coating measurment
Hetal Shah
Mon, 5 Jul 2010 06:48:39 -0700
unsubsribe us
Hetal Shah
Mon, 26 Jul 2010 07:05:27 -0700
New Sender Ian Hanna
Re: BAKING OF PWB QUESTION
Ian Hanna
Tue, 13 Jul 2010 12:58:44 -0400
Re: Board thickness tolerance on IPC spec?
Ian Hanna
Fri, 9 Jul 2010 11:03:05 -0400
Re: NTC Friday Element Quiz
Ian Hanna
Fri, 9 Jul 2010 14:44:20 -0400
Re: NTC Friday Element Quiz The Question
Ian Hanna
Tue, 6 Jul 2010 11:09:09 -0400
Re: NTC: Photos
Ian Hanna
Wed, 21 Jul 2010 12:32:12 -0400
Re: Removing gold and leaving nickel unaffected
Ian Hanna
Mon, 19 Jul 2010 14:49:21 -0400
New Sender Inge
Re: Bright tin
Inge
Sun, 4 Jul 2010 08:04:42 +0200
Re: Carbon Emissions
Inge
Thu, 8 Jul 2010 23:30:31 +0200
Re: Departure
Inge
Thu, 8 Jul 2010 23:01:44 +0200
Re: Friday quiz 14
Inge
Fri, 23 Jul 2010 19:02:02 +0200
Re: Friday quiz 14
Inge
Fri, 23 Jul 2010 22:20:23 +0200
Re: Friday quiz 14
Inge
Fri, 23 Jul 2010 22:37:09 +0200
Hybrid precap q
Inge
Wed, 7 Jul 2010 12:16:08 +0200
Re: Hybrid precap q
Inge
Wed, 7 Jul 2010 18:33:57 +0200
Re: Hybrid precap q
Inge
Wed, 7 Jul 2010 19:19:32 +0200
Re: Net List Discipline
Inge
Fri, 2 Jul 2010 17:24:27 +0200
NTC Friday Quiz 13
Inge
Mon, 19 Jul 2010 22:03:29 +0200
NTC: Frida quiz 13
Inge
Mon, 19 Jul 2010 22:21:59 +0200
Re: NTC: Friday quiz 11
Inge
Fri, 2 Jul 2010 16:40:26 +0200
Re: NTC: Friday quiz 11
Inge
Wed, 7 Jul 2010 19:09:14 +0200
Re: NTC: Friday quiz 11
Inge
Wed, 7 Jul 2010 22:17:01 +0200
Re: NTC: Friday quiz 11
Inge
Wed, 7 Jul 2010 23:45:40 +0200
Re: NTC: Friday quiz 12
Inge
Thu, 8 Jul 2010 19:59:30 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:07:00 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:10:09 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:12:26 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:14:38 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:15:31 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:17:13 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:19:24 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:23:47 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:39:16 +0200
Re: NTC: Friday quiz 12
Inge
Fri, 9 Jul 2010 18:43:03 +0200
NTC: Friday quiz 13
Inge
Fri, 16 Jul 2010 21:23:18 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 07:43:09 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 16:19:02 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 16:21:37 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 16:36:52 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 17:12:52 +0200
Re: NTC: Friday quiz 13
Inge
Mon, 19 Jul 2010 21:19:25 +0200
NTC: Friday quiz 13
Inge
Thu, 29 Jul 2010 18:23:09 +0200
Re: NTC: Friday quiz 13
Inge
Fri, 30 Jul 2010 18:34:02 +0200
NTC: Friday quiz14
Inge
Thu, 22 Jul 2010 21:07:00 +0200
Re: NTC: Photos
Inge
Wed, 21 Jul 2010 18:18:22 +0200
Re: NTC: Photos
Inge
Wed, 21 Jul 2010 20:14:07 +0200
Re: NTC: Photos
Inge
Wed, 21 Jul 2010 20:45:50 +0200
Re: NTC: Photos
Inge
Thu, 22 Jul 2010 20:17:51 +0200
Re: NTC: Photos
Inge
Thu, 22 Jul 2010 20:50:30 +0200
Re: PCB Discoloration
Inge
Fri, 30 Jul 2010 09:28:28 +0200
Re: Plasma Chamber Maintenance
Inge
Fri, 30 Jul 2010 18:19:09 +0200
Re: Removing gold and leaving nickel unaffected
Inge
Wed, 21 Jul 2010 09:16:04 +0200
Re: Removing gold and leaving nickel unaffected
Inge
Wed, 21 Jul 2010 14:32:45 +0200
Re: SMT PAD Current Capability
Inge
Wed, 21 Jul 2010 10:23:19 +0200
Re: SMT PAD Current Capability
Inge
Thu, 22 Jul 2010 12:53:08 +0200
Re: TechNet Digest
Inge
Wed, 7 Jul 2010 22:23:28 +0200
New Sender Ioan Tempea
Re: NTC. World Cup
Ioan Tempea
Thu, 8 Jul 2010 07:51:40 -0400
Re: NTC: Friday quiz 12
Ioan Tempea
Fri, 9 Jul 2010 11:56:29 -0400
Profiling in ovens withour mesh
Ioan Tempea
Wed, 14 Jul 2010 13:08:20 -0400
New Sender J W
OSP Coating
J W
Mon, 19 Jul 2010 08:44:44 -0400
New Sender Jack Olson
Re: My first RoHS circuit board!
Jack Olson
Wed, 7 Jul 2010 10:26:52 -0500
non-functional pad removal
Jack Olson
Mon, 12 Jul 2010 10:52:51 -0500
Re: Non-Hygroscopic" flex circuit material
Jack Olson
Tue, 27 Jul 2010 08:47:30 -0500
Re: SMT PAD Current Capability
Jack Olson
Wed, 21 Jul 2010 09:46:05 -0500
TechNet Digest
Jack Olson
Wed, 7 Jul 2010 08:13:53 -0500
Re: TechNet Digest
Jack Olson
Wed, 7 Jul 2010 15:55:41 -0500
New Sender jan chen
Re: Laminate and prepreg question
jan chen
Mon, 26 Jul 2010 15:45:09 +0800
Re: SMT PAD Current Capability
jan chen
Thu, 22 Jul 2010 09:42:38 +0800
New Sender jan
the different of PCB dielectric material about ES and dielctric Breakdown
jan
Thu, 29 Jul 2010 16:13:41 +0800
New Sender Jeremias, Michael
AW: [TN] MIL-S-13949/EPS0606/IPC-1710 etc
Jeremias, Michael
Tue, 6 Jul 2010 12:14:54 +0200
New Sender Jim Henderson
Re: NTC: Friday quiz 12
Jim Henderson
Fri, 9 Jul 2010 08:40:02 -0400
New Sender Joe Macko
Re: Underfill as a Remedy for Electro Migration?
Joe Macko
Wed, 14 Jul 2010 12:34:45 -0700
New Sender John Burke
Re: NTC: Friday quiz 12
John Burke
Fri, 9 Jul 2010 08:50:53 -0700
Re: NTC: Friday quiz 12
John Burke
Fri, 9 Jul 2010 10:28:10 -0700
Re: NTC: Friday quiz14
John Burke
Fri, 23 Jul 2010 13:51:17 -0700
Re: The Queen's Visit to RIM
John Burke
Mon, 5 Jul 2010 10:06:54 -0700
Re: The Queen's Visit to RIM
John Burke
Mon, 5 Jul 2010 15:00:48 -0700
New Sender Joyce Koo
Re: AW: [TN] PCB storage
Joyce Koo
Thu, 15 Jul 2010 11:44:38 -0400
Re: Interposer for SAC BGA
Joyce Koo
Fri, 9 Jul 2010 10:28:45 -0400
Re: Non-Hygroscopic" flex circuit material
Joyce Koo
Mon, 26 Jul 2010 21:23:13 -0400
Re: NTC Friday Element Quiz
Joyce Koo
Fri, 9 Jul 2010 08:52:07 -0400
Re: NTC Friday Element Quiz - The Answer
Joyce Koo
Mon, 19 Jul 2010 09:30:04 -0400
Re: NTC Friday Element Quiz - The Answer
Joyce Koo
Fri, 30 Jul 2010 14:14:17 -0400
Re: NTC Friday Element Quiz - The Question
Joyce Koo
Fri, 16 Jul 2010 08:48:06 -0400
Re: NTC: Friday quiz 11
Joyce Koo
Wed, 7 Jul 2010 10:35:31 -0400
Re: NTC: Friday quiz 12
Joyce Koo
Fri, 9 Jul 2010 08:22:19 -0400
Re: NTC: Friday quiz 13
Joyce Koo
Thu, 29 Jul 2010 21:32:53 -0400
Re: NTC: Friday quiz14
Joyce Koo
Thu, 22 Jul 2010 19:24:47 -0400
Re: Obsolete Part Cross-reference Resource
Joyce Koo
Fri, 16 Jul 2010 10:50:02 -0400
Re: Obsolete Part Cross-reference Resource
Joyce Koo
Fri, 16 Jul 2010 12:55:58 -0400
Re: PCB storage
Joyce Koo
Thu, 15 Jul 2010 11:14:54 -0400
Re: Plasma Chamber Maintenance
Joyce Koo
Fri, 30 Jul 2010 09:24:20 -0400
Re: SMT PAD Current Capability
Joyce Koo
Wed, 21 Jul 2010 13:08:05 -0400
Re: solder joint height
Joyce Koo
Tue, 20 Jul 2010 15:17:55 -0400
Re: The Queen's Visit to RIM
Joyce Koo
Mon, 5 Jul 2010 18:05:29 -0400
Re: Underfill as a Remedy for Electro Migration?
Joyce Koo
Thu, 8 Jul 2010 10:22:30 -0400
New Sender Juan T. Marugan
NTC. World Cup
Juan T. Marugan
Wed, 7 Jul 2010 15:40:00 -0500
Re: NTC. World Cup
Juan T. Marugan
Thu, 8 Jul 2010 11:28:45 -0500
New Sender Kane, Joseph E (US SSA)
Re: Baking in tape & reel
Kane, Joseph E (US SSA)
Thu, 22 Jul 2010 11:17:29 -0400
Re: BAKING OF PWB QUESTION
Kane, Joseph E (US SSA)
Wed, 14 Jul 2010 09:38:10 -0400
Re: BAKING OF PWB QUESTION
Kane, Joseph E (US SSA)
Wed, 14 Jul 2010 11:05:09 -0400
Re: PCB storage
Kane, Joseph E (US SSA)
Thu, 15 Jul 2010 11:09:42 -0400
New Sender Karl Sauter
Re: Single PCB backdrilling
Karl Sauter
Thu, 1 Jul 2010 07:59:01 -0700
Re: Single PCB backdrilling
Karl Sauter
Thu, 1 Jul 2010 10:01:13 -0700
Re: Single PCB backdrilling
Karl Sauter
Thu, 1 Jul 2010 10:14:59 -0700
New Sender Ken Barton
MIL-S-13949/EPS0606/IPC-1710 etc
Ken Barton
Fri, 2 Jul 2010 09:31:21 -0700
Re: MIL-S-13949/EPS0606/IPC-1710 etc
Ken Barton
Fri, 2 Jul 2010 10:21:52 -0700
New Sender Ken Bloomquist
Re: Friday quiz 14
Ken Bloomquist
Fri, 23 Jul 2010 08:22:40 -0700
Re: NTC Friday Element Quiz - The Question
Ken Bloomquist
Fri, 16 Jul 2010 06:13:53 -0700
Re: NTC Friday Element Quiz - The Question
Ken Bloomquist
Fri, 30 Jul 2010 06:41:12 -0700
Re: NTC Friday Element Quiz The Question
Ken Bloomquist
Fri, 2 Jul 2010 07:54:56 -0700
Re: NTC: Friday quiz 11
Ken Bloomquist
Fri, 2 Jul 2010 09:25:52 -0700
Re: NTC: Friday quiz 11
Ken Bloomquist
Tue, 6 Jul 2010 08:17:37 -0700
Re: NTC: Friday quiz 11
Ken Bloomquist
Wed, 7 Jul 2010 13:34:55 -0700
Re: NTC: Friday quiz 13
Ken Bloomquist
Mon, 19 Jul 2010 12:54:47 -0700
Re: NTC: Friday quiz 13
Ken Bloomquist
Fri, 30 Jul 2010 07:50:57 -0700
Re: NTC: Friday quiz14
Ken Bloomquist
Fri, 23 Jul 2010 07:53:18 -0700
New Sender Ken Harp
Re: System schematic markings of assemblies
Ken Harp
Thu, 15 Jul 2010 09:27:33 -0500
Re: Underfill as a Remedy for Electro Migration?
Ken Harp
Wed, 14 Jul 2010 12:07:54 -0500
New Sender Kenneth Wood
Re: 0201 footprint requirements
Kenneth Wood
Wed, 28 Jul 2010 10:16:40 -0400
Re: New Definition for the Term "P Charts"
Kenneth Wood
Wed, 28 Jul 2010 08:05:06 -0400
Non-Hygroscopic" flex circuit material
Kenneth Wood
Mon, 26 Jul 2010 15:01:04 -0400
Re: Non-Hygroscopic" flex circuit material
Kenneth Wood
Mon, 26 Jul 2010 16:09:26 -0400
Re: Non-Hygroscopic" flex circuit material
Kenneth Wood
Wed, 28 Jul 2010 08:04:03 -0400
New Sender Kim Sterling
IPC Urging IEEE Members to Get Involved in Ballot on "Environmentally Preferable Electronic Equipment"
Kim Sterling
Thu, 1 Jul 2010 15:59:01 -0500
New Sender Kinner, Phil
Re: NTC: Friday quiz 11
Kinner, Phil
Wed, 7 Jul 2010 09:16:19 -0400
New Sender Krishnan (Radhakrishnan) Chezhian
Re: Removing gold and leaving nickel unaffected
Krishnan (Radhakrishnan) Chezhian
Wed, 21 Jul 2010 17:19:57 +0800
New Sender Laroe, Michael
Re: NTC Friday Element Quiz - The Question - Found word(s) list error in the Text body
Laroe, Michael
Fri, 30 Jul 2010 09:07:30 -0400
Re: NTC Friday Element Quiz - The Question - Found word(s) list error in the Text body
Laroe, Michael
Fri, 30 Jul 2010 13:08:32 -0400
Re: NTC Friday Element Quiz - The Question - Found word(s) list error in the Text body - Found word(s) list error in the subject
Laroe, Michael
Fri, 30 Jul 2010 14:02:07 -0400
New Sender Lars Wallin
TRICKY PRICE QUESTION
Lars Wallin
Fri, 9 Jul 2010 00:30:38 -0500
New Sender Lee parker
Re: TRICKY PRICE QUESTION
Lee parker
Fri, 9 Jul 2010 09:53:47 -0400
New Sender Leif Erik Laerum
Re: Underfill as a Remedy for Electro Migration?
Leif Erik Laerum
Thu, 8 Jul 2010 07:38:54 -0500
Re: Underfill as a Remedy for Electro Migration?
Leif Erik Laerum
Mon, 12 Jul 2010 10:04:07 -0500
Re: [SPAM] - Re: [TN] Underfill as a Remedy for Electro Migration? - Found word(s) list error in the Text body
Leif Erik Laerum
Thu, 8 Jul 2010 08:03:20 -0500
New Sender Leif Laerum
Underfill as a Remedy for Electro Migration?
Leif Laerum
Wed, 7 Jul 2010 17:11:40 -0500
New Sender Leland Woodall
Re: Departure
Leland Woodall
Thu, 8 Jul 2010 13:36:46 -0400
New Sender Linda Langley
Re: NTC: Friday quiz 12
Linda Langley
Fri, 9 Jul 2010 12:50:45 -0400
Re: PCB Discoloration
Linda Langley
Fri, 30 Jul 2010 11:03:55 -0400
Silk Screen Ink Pen
Linda Langley
Fri, 2 Jul 2010 12:13:06 -0400
New Sender Lon Weffers
FW: Failing leds due to conformal coating?
Lon Weffers
Thu, 15 Jul 2010 16:09:00 +0200
New Sender Louis Hart
A/B-R coupons
Louis Hart
Fri, 30 Jul 2010 18:10:40 -0400
New Sender Luan Nguyen
Old revision for IPC-A-610 & J-STD-001
Luan Nguyen
Fri, 23 Jul 2010 09:02:50 +0700
New Sender Luis A. Gallegos
Converting Auto Insertion (axial) Pb to Pb-free
Luis A. Gallegos
Fri, 23 Jul 2010 08:51:36 -0500
test
Luis A. Gallegos
Fri, 23 Jul 2010 08:49:07 -0500
New Sender Lum Wee Mei
Re: Board thickness tolerance on IPC spec?
Lum Wee Mei
Sat, 10 Jul 2010 13:14:55 +0800
Conformal Coating for Flex Circuit
Lum Wee Mei
Wed, 21 Jul 2010 10:53:51 +0800
New Sender Marc Bituagan
Jig for transferring TSSOP from plastic to metal tube/cassette
Marc Bituagan
Thu, 1 Jul 2010 14:35:29 +0800
New Sender Matthias Mansfeld
Re: NTC: Friday quiz 13
Matthias Mansfeld
Fri, 30 Jul 2010 04:22:28 +0200
New Sender McGlaughlin, Jeffrey A
Obsolete Part Cross-reference Resource
McGlaughlin, Jeffrey A
Fri, 16 Jul 2010 10:30:19 -0400
Re: Obsolete Part Cross-reference Resource
McGlaughlin, Jeffrey A
Fri, 16 Jul 2010 12:21:52 -0400
New Sender Mel Parrish
Re: Springs, Not Solder?
Mel Parrish
Mon, 19 Jul 2010 16:15:49 -0500
New Sender Mike Bogden
Re: BAKING OF PWB QUESTION
Mike Bogden
Tue, 13 Jul 2010 08:44:13 -0700
New Sender Mike Buetow
Springs, Not Solder?
Mike Buetow
Fri, 16 Jul 2010 12:58:26 -0400
New Sender Mike Fenner
Re: Bright tin
Mike Fenner
Thu, 1 Jul 2010 10:57:22 +0100
Re: Hybrid precap q
Mike Fenner
Wed, 7 Jul 2010 17:18:31 +0100
Re: Hybrid precap q
Mike Fenner
Thu, 8 Jul 2010 16:02:15 +0100
Re: NTC: Friday quiz 13
Mike Fenner
Mon, 19 Jul 2010 13:55:13 +0100
Re: NTC: Friday quiz14
Mike Fenner
Fri, 23 Jul 2010 14:48:51 +0100
Re: silver solders and thermal fatigue resistance
Mike Fenner
Thu, 15 Jul 2010 17:03:22 +0100
Re: silver solders and thermal fatigue resistance
Mike Fenner
Fri, 16 Jul 2010 16:00:10 +0100
New Sender Mike Laroe
Re: Liquid Solder Mask for Etch-Cuts exposed to Wave
Mike Laroe
Thu, 29 Jul 2010 09:17:29 -0500
New Sender Mike Sewell
Re: Non-Hygroscopic" flex circuit material
Mike Sewell
Mon, 26 Jul 2010 14:42:54 -0500
Re: Profiling in ovens withour mesh
Mike Sewell
Wed, 14 Jul 2010 12:15:04 -0500
New Sender MikeyMike
Liquid Solder Mask for Etch-Cuts exposed to Wave
MikeyMike
Wed, 28 Jul 2010 14:30:52 -0500
New Sender Neifer, Gebhard
AW: [TN] NTC: Friday quiz14
Neifer, Gebhard
Fri, 23 Jul 2010 09:24:37 +0200
AW: [TN] PCB storage
Neifer, Gebhard
Thu, 15 Jul 2010 17:28:49 +0200
New Sender Neil Maloney
Re: NTC: Friday quiz 12
Neil Maloney
Fri, 9 Jul 2010 11:49:23 -0500
New Sender Nigel Burtt
Re: Carbon Emissions
Nigel Burtt
Fri, 9 Jul 2010 02:39:05 -0500
Re: Cracked 2208 smt resistor end joint
Nigel Burtt
Mon, 5 Jul 2010 03:29:33 -0500
Re: Ni in Eutectic SnPb solder
Nigel Burtt
Thu, 8 Jul 2010 03:33:59 -0500
Re: NTC Friday Element Quiz
Nigel Burtt
Fri, 9 Jul 2010 07:49:58 -0500
Re: NTC Friday Element Quiz The Question
Nigel Burtt
Fri, 2 Jul 2010 10:00:46 -0500
Re: NTC: Friday quiz 12
Nigel Burtt
Fri, 9 Jul 2010 07:53:05 -0500
Re: NTC: Friday quiz 13
Nigel Burtt
Fri, 30 Jul 2010 03:57:03 -0500
Re: PCB Discoloration
Nigel Burtt
Fri, 30 Jul 2010 04:04:30 -0500
Re: Profiling in ovens withour mesh
Nigel Burtt
Thu, 15 Jul 2010 02:40:45 -0500
New Sender Nowland, Russell Howard (Russell)
Re: OSP Coating
Nowland, Russell Howard (Russell)
Mon, 19 Jul 2010 08:58:08 -0500
New Sender Ofer Cohen-QM
Telecom and Lead Free
Ofer Cohen-QM
Fri, 16 Jul 2010 17:33:22 +0300
New Sender Paul Edwards
Re: BAKING OF PWB QUESTION
Paul Edwards
Thu, 15 Jul 2010 12:21:52 -0700
Re: Cracked 2208 smt resistor end joint - Found word(s) list error in the Text body
Paul Edwards
Fri, 2 Jul 2010 19:11:32 -0700
Re: FW: Failing leds due to conformal coating?
Paul Edwards
Thu, 15 Jul 2010 07:27:44 -0700
Re: Mica and heat sink slug and TO-220
Paul Edwards
Thu, 15 Jul 2010 21:08:33 -0700
Re: PCB storage
Paul Edwards
Thu, 15 Jul 2010 07:30:07 -0700
Re: PCB storage
Paul Edwards
Thu, 15 Jul 2010 08:12:57 -0700
Re: PCB storage - Found word(s) list error in the Text body
Paul Edwards
Thu, 15 Jul 2010 08:18:40 -0700
Re: Profiling in ovens withour mesh
Paul Edwards
Thu, 15 Jul 2010 07:37:50 -0700
New Sender Paul Reid
Re: BAKING OF PWB QUESTION
Paul Reid
Tue, 13 Jul 2010 16:54:58 -0400
Re: BAKING OF PWB QUESTION
Paul Reid
Wed, 14 Jul 2010 10:57:13 -0400
Re: BAKING OF PWB QUESTION
Paul Reid
Thu, 15 Jul 2010 11:37:32 -0400
Re: BAKING OF PWB QUESTION
Paul Reid
Thu, 15 Jul 2010 17:30:48 -0400
Re: BAKING OF PWB QUESTION
Paul Reid
Thu, 15 Jul 2010 17:33:23 -0400
Re: Departure
Paul Reid
Fri, 9 Jul 2010 08:06:55 -0400
Re: non-functional pad removal
Paul Reid
Mon, 12 Jul 2010 17:23:55 -0400
Re: non-functional pad removal
Paul Reid
Mon, 12 Jul 2010 18:36:18 -0400
Re: NTC: Friday quiz 12
Paul Reid
Fri, 9 Jul 2010 08:13:04 -0400
Re: Question about FR4 Curing
Paul Reid
Fri, 2 Jul 2010 14:46:15 -0400
Re: Single PCB back drilling
Paul Reid
Thu, 1 Jul 2010 16:54:32 -0400
Re: Single PCB back drilling
Paul Reid
Fri, 2 Jul 2010 07:45:08 -0400
Re: Single PCB back drilling
Paul Reid
Fri, 2 Jul 2010 14:35:47 -0400
The Queen's Visit to RIM
Paul Reid
Mon, 5 Jul 2010 11:41:39 -0400
New Sender Pete Houwen
Re: 0201 footprint requirements
Pete Houwen
Wed, 28 Jul 2010 09:04:08 -0500
Re: My first RoHS circuit board!
Pete Houwen
Thu, 8 Jul 2010 08:16:36 -0500
Re: QFN pads design-QPI-3
Pete Houwen
Wed, 7 Jul 2010 08:55:52 -0500
New Sender Phil Nutting
RoHS vs. non-RoHS parts in subassemblies (boards)
Phil Nutting
Mon, 19 Jul 2010 12:41:58 -0400
System schematic markings of assemblies
Phil Nutting
Thu, 15 Jul 2010 08:51:31 -0400
Re: System schematic markings of assemblies
Phil Nutting
Thu, 15 Jul 2010 09:43:02 -0400
New Sender Phillip Bavaro
Mica and heat sink slug and TO-220
Phillip Bavaro
Thu, 15 Jul 2010 19:55:13 -0700
Re: Mica and heat sink slug and TO-220
Phillip Bavaro
Thu, 15 Jul 2010 23:20:29 -0700
Re: Profiling in ovens withour mesh
Phillip Bavaro
Thu, 15 Jul 2010 23:38:34 -0700
New Sender Post, Scott E
Baking in tape & reel
Post, Scott E
Wed, 21 Jul 2010 10:12:04 -0400
Re: Baking in tape & reel
Post, Scott E
Wed, 21 Jul 2010 11:16:48 -0400
New Sender R Sedlak
Re: Bright tin
R Sedlak
Wed, 30 Jun 2010 23:50:06 -0700
Re: Removing gold and leaving nickel unaffected
R Sedlak
Mon, 19 Jul 2010 14:42:09 -0700
Re: Removing gold and leaving nickel unaffected
R Sedlak
Mon, 19 Jul 2010 14:52:46 -0700
Re: Silk Screen Ink Pen
R Sedlak
Fri, 2 Jul 2010 13:36:30 -0700
Re: The Queen's Visit to RIM
R Sedlak
Mon, 5 Jul 2010 13:54:09 -0700
New Sender Rainer Taube
Re: BAKING OF PWB QUESTION
Rainer Taube
Wed, 14 Jul 2010 19:51:00 +0200
New Sender Randall L Bock
Departure
Randall L Bock
Thu, 8 Jul 2010 13:07:52 -0400
Re: Underfill as a Remedy for Electro Migration?
Randall L Bock
Thu, 8 Jul 2010 09:13:45 -0400
New Sender Reuven Rokah
Re: BAKING OF PWB QUESTION
Reuven Rokah
Tue, 13 Jul 2010 21:54:56 +0300
Re: non-functional pad removal
Reuven Rokah
Mon, 12 Jul 2010 19:31:00 +0300
Re: NTC. World Cup
Reuven Rokah
Thu, 8 Jul 2010 08:20:45 +0300
Re: NTC. World Cup
Reuven Rokah
Thu, 8 Jul 2010 19:58:58 +0300
Re: NTC: Friday quiz 13
Reuven Rokah
Fri, 30 Jul 2010 18:26:58 +0300
Re: PCB Discoloration
Reuven Rokah
Fri, 30 Jul 2010 18:33:33 +0300
Re: Single PCB back drilling
Reuven Rokah
Thu, 1 Jul 2010 09:36:01 +0300
New Sender Richard D. Krug
Hand Soldering on Polyimide Rigid-Flex Assemblies
Richard D. Krug
Mon, 26 Jul 2010 10:59:01 -0400
Re: Plasma Chamber Maintenance
Richard D. Krug
Fri, 30 Jul 2010 11:53:55 -0400
New Sender Rob Strecker
ESD Mat Standards
Rob Strecker
Thu, 8 Jul 2010 09:43:42 -0600
New Sender Robert Kondner
Re: 0201 footprint requirements
Robert Kondner
Tue, 13 Jul 2010 16:18:12 -0400
Re: BAKING OF PWB QUESTION
Robert Kondner
Thu, 15 Jul 2010 15:41:17 -0400
Re: BAKING OF PWB QUESTION
Robert Kondner
Thu, 15 Jul 2010 17:53:44 -0400
Re: Cracked 2208 smt resistor end joint
Robert Kondner
Sat, 3 Jul 2010 12:48:47 -0400
Re: NTC Friday Element Quiz The Question
Robert Kondner
Fri, 2 Jul 2010 16:44:22 -0400
Re: PCB Discoloration
Robert Kondner
Fri, 30 Jul 2010 11:12:07 -0400
Re: QFN pads design-QPI-3
Robert Kondner
Wed, 7 Jul 2010 08:32:06 -0400
New Sender Roberts, Jon (SA-1)
BAKING OF PWB QUESTION
Roberts, Jon (SA-1)
Tue, 13 Jul 2010 10:35:09 -0500
Re: BAKING OF PWB QUESTION
Roberts, Jon (SA-1)
Tue, 13 Jul 2010 11:24:01 -0500
Re: BAKING OF PWB QUESTION
Roberts, Jon (SA-1)
Tue, 13 Jul 2010 15:25:59 -0500
Re: BAKING OF PWB QUESTION
Roberts, Jon (SA-1)
Wed, 14 Jul 2010 08:57:47 -0500
Re: Underfill as a Remedy for Electro Migration?
Roberts, Jon (SA-1)
Thu, 8 Jul 2010 08:11:52 -0500
Re: Underfill as a Remedy for Electro Migration?
Roberts, Jon (SA-1)
Thu, 8 Jul 2010 09:46:47 -0500
New Sender Roger Mack
Re: PCB Discoloration
Roger Mack
Fri, 30 Jul 2010 09:28:01 -0500
Re: Profiling in ovens withour mesh
Roger Mack
Thu, 15 Jul 2010 11:38:25 -0500
New Sender Shean Dalton
Re: Underfill as a Remedy for Electro Migration?
Shean Dalton
Thu, 8 Jul 2010 12:20:09 -0500
New Sender Simon Huetter
Re: Board thickness tolerance on IPC spec?
Simon Huetter
Fri, 9 Jul 2010 09:56:41 +0200
New Sender Stephen Pierce
Net List Discipline
Stephen Pierce
Thu, 1 Jul 2010 12:56:45 -0700
NTC. World Cup
Stephen Pierce
Wed, 7 Jul 2010 13:43:25 -0700
TechNet Digest
Stephen Pierce
Wed, 7 Jul 2010 14:32:39 -0700
New Sender Steve Gregory
Re: NTC: Friday quiz 11
Steve Gregory
Fri, 2 Jul 2010 11:29:32 -0400
Re: NTC: Friday quiz 12
Steve Gregory
Fri, 9 Jul 2010 07:16:58 -0400
Re: NTC: Friday quiz 13
Steve Gregory
Sun, 18 Jul 2010 13:12:18 -0400
Re: NTC: Friday quiz 13
Steve Gregory
Thu, 29 Jul 2010 20:39:19 -0400
Re: NTC: Friday quiz14
Steve Gregory
Thu, 22 Jul 2010 19:20:58 -0400
Re: PCB Discoloration
Steve Gregory
Thu, 29 Jul 2010 21:34:24 -0400
Press fit presses
Steve Gregory
Fri, 30 Jul 2010 22:49:58 -0400
New Sender Steve Kelly
Re: BAKING OF PWB QUESTION
Steve Kelly
Tue, 13 Jul 2010 13:28:10 -0400
New Sender Steve Smith
Re: Obsolete Part Cross-reference Resource
Steve Smith
Fri, 16 Jul 2010 10:43:28 -0400
Re: System schematic markings of assemblies
Steve Smith
Thu, 15 Jul 2010 09:29:44 -0400
New Sender Steven Creswick
Re: Hybrid precap q
Steven Creswick
Wed, 7 Jul 2010 11:14:20 -0400
Re: Plasma Chamber Maintenance
Steven Creswick
Fri, 30 Jul 2010 10:22:11 -0400
Re: Plasma Chamber Maintenance
Steven Creswick
Fri, 30 Jul 2010 12:37:45 -0400
Re: Silk Screen Ink Pen
Steven Creswick
Fri, 2 Jul 2010 12:22:41 -0400
Re: UHV Soldering
Steven Creswick
Fri, 30 Jul 2010 16:53:42 -0400
New Sender Sue Powers-Hartman
Re: Liquid Solder Mask for Etch-Cuts exposed to Wave
Sue Powers-Hartman
Wed, 28 Jul 2010 14:45:55 -0600
Re: NTC: Friday quiz14
Sue Powers-Hartman
Fri, 23 Jul 2010 06:31:01 -0600
New Sender Syed Ahmad
Re: Non-Hygroscopic" flex circuit material
Syed Ahmad
Tue, 27 Jul 2010 12:05:28 -0500
Re: Non-Hygroscopic" flex circuit material
Syed Ahmad
Wed, 28 Jul 2010 10:00:27 -0500
Very small BGA package manufacturer
Syed Ahmad
Tue, 20 Jul 2010 13:03:19 -0500
New Sender Tan Geok Ang
QFN pads design-QPI-3
Tan Geok Ang
Wed, 7 Jul 2010 07:56:37 +0800
Re: QFN pads design-QPI-3
Tan Geok Ang
Thu, 8 Jul 2010 10:16:17 +0800
New Sender Thayer, Wayne - IIW
Re: Bombsite PCB drill
Thayer, Wayne - IIW
Thu, 1 Jul 2010 18:17:44 -0400
Re: Hybrid precap q
Thayer, Wayne - IIW
Wed, 7 Jul 2010 12:05:52 -0400
Re: non-functional pad removal
Thayer, Wayne - IIW
Mon, 12 Jul 2010 12:04:00 -0400
Re: SFF-8087 PCB (Also call Min SAS)---Really need you help
Thayer, Wayne - IIW
Thu, 8 Jul 2010 13:05:50 -0400
Re: solder joint height
Thayer, Wayne - IIW
Wed, 21 Jul 2010 09:18:07 -0400
New Sender Thomas E Kemp
Re: BAKING OF PWB QUESTION
Thomas E Kemp
Wed, 14 Jul 2010 09:44:52 -0500
New Sender Toby Carrier
Re: Cracked 2208 smt resistor end joint
Toby Carrier
Fri, 2 Jul 2010 20:59:55 -0400
New Sender Tontis, Theodore
Re: NTC: Friday quiz 13
Tontis, Theodore
Thu, 29 Jul 2010 21:29:22 -0400
Re: PCB Discoloration
Tontis, Theodore
Thu, 29 Jul 2010 21:52:42 -0400
New Sender Tony Liu
SFF-8087 PCB (Also call Min SAS)---Really need you help
Tony Liu
Thu, 8 Jul 2010 22:49:17 +0800
New Sender Upton, Shawn
Re: Net List Discipline
Upton, Shawn
Thu, 1 Jul 2010 11:36:46 -0400
New Sender Victor Hernandez
Re: Board thickness tolerance on IPC spec?
Victor Hernandez
Fri, 9 Jul 2010 05:00:39 -0500
Electronic Plated Gold Hardness, PWB fingers/connector contacts, etc
Victor Hernandez
Tue, 13 Jul 2010 13:17:48 -0500
Re: Ni in Eutectic SnPb solder
Victor Hernandez
Wed, 7 Jul 2010 15:22:13 -0500
Re: QFN : what is minimum solder thickness to rework
Victor Hernandez
Tue, 6 Jul 2010 06:47:12 -0500
Re: Single PCB backdrilling
Victor Hernandez
Thu, 1 Jul 2010 11:26:12 -0500
New Sender vladimir Igoshev
Re: Ni in Eutectic SnPb solder
vladimir Igoshev
Wed, 7 Jul 2010 20:17:20 +0000
Re: Ni in Eutectic SnPb solder
vladimir Igoshev
Wed, 7 Jul 2010 20:41:19 +0000
Re: QFN : what is minimum solder thickness to rework
vladimir Igoshev
Tue, 6 Jul 2010 11:51:11 +0000
New Sender Walt Manchin
Re: 0201 footprint requirements
Walt Manchin
Thu, 8 Jul 2010 18:13:23 +0000
New Sender Werner Engelmaier
Re: 0201 footprint requirements
Werner Engelmaier
Wed, 7 Jul 2010 22:35:44 -0400
Re: 0201 footprint requirements
Werner Engelmaier
Thu, 8 Jul 2010 13:19:47 -0400
Re: 0201 footprint requirements
Werner Engelmaier
Tue, 13 Jul 2010 16:07:31 -0400
Re: AW: [TN] MIL-S-13949/EPS0606/IPC-1710 etc
Werner Engelmaier
Tue, 6 Jul 2010 06:40:31 -0400
Re: BAKING OF PWB QUESTION
Werner Engelmaier
Thu, 15 Jul 2010 15:00:37 -0400
Re: BAKING OF PWB QUESTION
Werner Engelmaier
Thu, 15 Jul 2010 15:43:44 -0400
Re: Cracked 2208 smt resistor end joint
Werner Engelmaier
Fri, 2 Jul 2010 21:30:22 -0400
Re: Departure
Werner Engelmaier
Thu, 8 Jul 2010 13:21:05 -0400
Re: Hand Soldering on Polyimide Rigid-Flex Assemblies
Werner Engelmaier
Mon, 26 Jul 2010 11:18:48 -0400
Re: MIL-S-13949/EPS0606/IPC-1710 etc
Werner Engelmaier
Fri, 2 Jul 2010 13:06:32 -0400
Re: non-functional pad removal
Werner Engelmaier
Mon, 12 Jul 2010 12:19:41 -0400
Re: non-functional pad removal
Werner Engelmaier
Mon, 12 Jul 2010 17:41:51 -0400
Re: Old revision for IPC-A-610 & J-STD-001
Werner Engelmaier
Fri, 23 Jul 2010 07:43:40 -0400
Re: QFN : what is minimum solder thickness to rework
Werner Engelmaier
Mon, 5 Jul 2010 19:50:25 -0400
Re: Question about FR4 Curing
Werner Engelmaier
Fri, 2 Jul 2010 11:22:05 -0400
Re: Question about FR4 Curing
Werner Engelmaier
Fri, 2 Jul 2010 13:19:48 -0400
Re: SFF-8087 PCB (Also call Min SAS)---Really need you help
Werner Engelmaier
Tue, 13 Jul 2010 15:52:45 -0400
Re: silver solders and thermal fatigue resistance
Werner Engelmaier
Wed, 14 Jul 2010 14:00:54 -0400
Re: silver solders and thermal fatigue resistance
Werner Engelmaier
Wed, 14 Jul 2010 16:04:23 -0400
Re: SMT PAD Current Capability
Werner Engelmaier
Tue, 20 Jul 2010 12:09:11 -0400
Re: SMT PAD Current Capability
Werner Engelmaier
Tue, 20 Jul 2010 12:26:34 -0400
Re: solder joint height
Werner Engelmaier
Tue, 20 Jul 2010 11:19:19 -0400
Re: solder joint height
Werner Engelmaier
Tue, 20 Jul 2010 12:24:28 -0400
Re: solder joint height
Werner Engelmaier
Tue, 20 Jul 2010 13:01:05 -0400
Re: solder joint height
Werner Engelmaier
Wed, 21 Jul 2010 13:59:31 -0400
Re: solder joint height
Werner Engelmaier
Thu, 22 Jul 2010 23:31:19 -0400
New Sender Whittaker, Dewey (EHCOE)
Apologies
Whittaker, Dewey (EHCOE)
Fri, 9 Jul 2010 07:59:45 -0700
Re: BAKING OF PWB QUESTION
Whittaker, Dewey (EHCOE)
Tue, 13 Jul 2010 09:50:23 -0700
Re: Bright tin
Whittaker, Dewey (EHCOE)
Thu, 1 Jul 2010 06:51:20 -0700
Re: Converting Auto Insertion (axial) Pb to Pb-free
Whittaker, Dewey (EHCOE)
Fri, 23 Jul 2010 07:54:13 -0700
Re: Non-Hygroscopic" flex circuit material
Whittaker, Dewey (EHCOE)
Tue, 27 Jul 2010 08:34:53 -0700
Re: NTC Friday Element Quiz
Whittaker, Dewey (EHCOE)
Fri, 9 Jul 2010 08:02:25 -0700
Re: NTC Friday Element Quiz - The Question
Whittaker, Dewey (EHCOE)
Fri, 16 Jul 2010 10:16:33 -0700
Re: NTC Friday Element Quiz The Question
Whittaker, Dewey (EHCOE)
Tue, 6 Jul 2010 07:49:39 -0700
Re: NTC Friday Element Quiz The Question
Whittaker, Dewey (EHCOE)
Tue, 6 Jul 2010 08:33:19 -0700
Re: NTC: Friday quiz 11
Whittaker, Dewey (EHCOE)
Tue, 6 Jul 2010 08:43:29 -0700
Re: NTC: Friday quiz 11
Whittaker, Dewey (EHCOE)
Wed, 7 Jul 2010 10:17:28 -0700
Re: NTC: Friday quiz14
Whittaker, Dewey (EHCOE)
Fri, 23 Jul 2010 08:20:52 -0700
Re: NTC: Photos
Whittaker, Dewey (EHCOE)
Wed, 21 Jul 2010 09:28:26 -0700
Re: NTC: Photos
Whittaker, Dewey (EHCOE)
Fri, 23 Jul 2010 07:05:51 -0700
Re: Plasma Chamber Maintenance
Whittaker, Dewey (EHCOE)
Fri, 30 Jul 2010 10:02:27 -0700
Re: Springs, Not Solder?
Whittaker, Dewey (EHCOE)
Fri, 16 Jul 2010 10:06:05 -0700
Re: Underfill as a Remedy for Electro Migration?
Whittaker, Dewey (EHCOE)
Thu, 8 Jul 2010 07:05:24 -0700
Re: Underfill as a Remedy for Electro Migration?
Whittaker, Dewey (EHCOE)
Thu, 8 Jul 2010 08:01:15 -0700
Re: Underfill as a Remedy for Electro Migration?
Whittaker, Dewey (EHCOE)
Fri, 9 Jul 2010 07:47:54 -0700
New Sender Winning
答复: [TN] OSP Coating
Winning
Mon, 19 Jul 2010 23:32:54 +0800
New Sender Wrobel, Clayton (SA-1)
Re: SMT PAD Current Capability
Wrobel, Clayton (SA-1)
Thu, 22 Jul 2010 10:28:18 -0400

ATOM RSS1 RSS2