LISTSERV mailing list manager LISTSERV 16.0

Help for TECHNET Archives


TECHNET Archives

TECHNET Archives


July 2000


View:

Show Author | Hide Author
Show Table of Contents | Hide Table of Contents

 

Table of Contents:

"Bubbly Soldermask..." (24 messages)
"Bubbly Soldermask..." Digital Pics (2 messages)
"Technology Associates" - Bud Trapp and Semiconductor Re liability (1 message)
"Technology Associates" - Bud Trapp and Semiconductor Reliability (2 messages)
(TN) Reflow Issue (2 messages)
(TN) SMT Line & ESD (1 message)
0402 inspection (4 messages)
100% Non-Aqueous Cleaners (12 messages)
1206 Capacitors on 1812 Pads (1 message)
3 oz material (6 messages)
<No subject> (6 messages)
Accelerated Testing (1 message)
Adhesive contamintation (3 messages)
Adhesive over pads. (6 messages)
Adhesive Printing (Was: Mounting) (1 message)
adhesive remover (1 message)
Adhesive Remover for artwork (12 messages)
Admin Test Message (1 message)
air entrapment with conformal coating (1 message)
Air Puck (2 messages)
AMP Mictor connectors (4 messages)
Antw: [TN] Solder creep characteristics (1 message)
AOI (1 message)
Assy Question about pin length through the board....Y'all (2 messages)
Bellcore GR-78 ... (1 message)
Bent Leads on PLCC's (2 messages)
Best books on Electronic Assembly (3 messages)
Best books oon Electronic Assembly (4 messages)
BGA bridging... (6 messages)
BGA Reflow Problems (6 messages)
Board materials - FR4 vs CEM3 (2 messages)
board photos (was RE: [TN] "Bubbly Soldermask...") (3 messages)
Bob Willis Online At SMTnet Now! (1 message)
Bubbly not technical (1 message)
CALL FOR PAPERS - IPC 5th Annual Conference on High Density Interconnect Structures (HDIS) (1 message)
CAM350 software recommendation (3 messages)
Carbon ink outside services??? (2 messages)
Carrier Tape (6 messages)
CBGA 429 in high rel application (3 messages)
CECC00802 soldering standard (1 message)
Cer air mini muffler (2 messages)
Change in Dielectric over Temp (1 message)
Coffin-Manson Eq. (1 message)
Complete Liquidation of 2 PCB Mfg Facilities (8 messages)
Component weights for double-sided reflow (4 messages)
Conductive rivets (3 messages)
Conformal Coat question (4 messages)
Connector Problem (1 message)
Controlled Impedance Testing (4 messages)
Coplanarity measurements (2 messages)
Copper plug heat sinks (1 message)
Copy of your own Posts (1 message)
DCA to static contact angle (2 messages)
Design Rules; RE: Component Spacing (3 messages)
ED vs. RS Vib system (3 messages)
Electrical testing (2 messages)
EMI/RFIMilStds (1 message)
Epoxy Underfill (1 message)
Equipment moving. (4 messages)
Failure Analysis (7 messages)
Filled via holes (1 message)
Final finishes (3 messages)
Flash (3 messages)
Flipchip underfill (3 messages)
Flying probe tester (2 messages)
FR2 (3 messages)
FW: ESD Trays (1 message)
Fw: Re: [TN] Serialization of boards (1 message)
Fw: Thermal stress/shock profile for loaded board (1 message)
Fw: [TN] BGA bridging... (1 message)
Glass Transition Temperature (Tg) Questions (12 messages)
GMP (FDA Requirements) (2 messages)
Gold Finger Repair (2 messages)
HALT and HASS (5 messages)
heat pipe for laptop (3 messages)
hi rajesh (1 message)
Holy-moly!! "Bubbly Soldermask..." (2 messages)
Imaging with Silk screen / Compound of copper for vias and Multilayers vias (1 message)
Immersion tin & soldermask compatibility (1 message)
Impedance Coupons (2 messages)
In Line Optical Inspection for SMD (1 message)
In need of Very fine / spacing Flex PWB Manufacturer (1 message)
in-rush current (2 messages)
Inspecting PGAs after wave solder (7 messages)
Inspection Templates (2 messages)
Internal radial crack<-partially filled via (2 messages)
Internal radial crack??? (4 messages)
IPC Accepting Abstracts for Expo 2001 Technical Conference (1 message)
IPC-A-600F Section 3.1.1 Define Zone B Delamination (5 messages)
IPC356 vs. RS-274X (2 messages)
ISO Base material with 400 microns of copper (1 message)
Isolation (2 messages)
Jokes (2 messages)
Jokes - ATTENTION: message is a virus, DON'T open! (1 message)
Jokes CONTAINS WORM (1 message)
Keeping Jokes and other bugs off our PC's (1 message)
Kwickfit panelization (2 messages)
Large PCB (2 messages)
Layout Design Guide for MCM (1 message)
Layout Design Guidelines for MCM, COB (2 messages)
LCCC Usage (5 messages)
LDI (6 messages)
leadtimes for PWB fabs (3 messages)
LGX file extension (3 messages)
Looking for a Mil Spec (4 messages)
Looking for suppliers of insoluble lead anodes (1 message)
Mail Undeliverable: Failure Detected (1 message)
Manufacturing Floor Temperature... (7 messages)
Micro BGA rework... (4 messages)
MIL Standards (3 messages)
Missing Fiducials (6 messages)
moisture sensitive components (2 messages)
more Spam on spam? (2 messages)
Mounting on 0.5mm PCB's (3 messages)
Mounting- Vertical - Radial Leaded (9 messages)
Mounting- Vertical - Radial Leaded oh no! (1 message)
New Magazine (1 message)
No flow underfill (2 messages)
Odd-Form Placement (1 message)
Online Solder Training (3 messages)
Outgassing -- not a space application (2 messages)
Pad design guidelines for CCGA (1 message)
PADS ASCII Design file reader? (5 messages)
Paging Ed Popielarski (1 message)
Palladium query (2 messages)
PC Board mounted device? (3 messages)
Permanent Marker for ID # marking on PCB while being bui ld (1 message)
Permanent Marker for ID # marking on PCB while being build (1 message)
Personnel Protective Equipment (PPE) (4 messages)
Philips CSM & Trimmer Cap (1 message)
Photo Permissions (was RE: [TN] "Bubbly Soldermask...") (2 messages)
Plane Capacitors (4 messages)
Plating to Aluminum Core Board (2 messages)
PLCC Coplanarity... (or lack of) (11 messages)
Plugging Vias With Conductive Epoxy (6 messages)
Point of Use Stocking (2 messages)
Pre-tinning... (5 messages)
Quality Control (6 messages)
Quality Practices (1 message)
Quality Software (3 messages)
Quality System Support (5 messages)
Question on D.I. system fouling (4 messages)
Question on Short Run Processes (2 messages)
Questions for assemblers: (1 message)
RE Odd-form insertion machines (1 message)
Recommendations on IR Fusing Equipment (1 message)
Reducing package to 0402 (5 messages)
Reflow Issue (6 messages)
Reflow Oven (3 messages)
Reflow Oven Causing Bridging??? (1 message)
Reliability Contract Help (1 message)
Reliability Testing (3 messages)
Removal of mastic (tape residue) (1 message)
Repeted: [TN] EOS-models for bi/unipolar semis (1 message)
Request for Adhesive Information or Assistance (1 message)
ReRadialLeadedSpacer (1 message)
Responses to Spam (1 message)
Say Good-bye-No Technical Content (4 messages)
search for standard (2 messages)
SEARCH warpage bow twist IN TechNet (2 messages)
Serialization of boards (7 messages)
sighoff technet (1 message)
Sign Off (1 message)
SIGN OFF Technet (1 message)
Silver migration articles (1 message)
small qty wire drawing facility (2 messages)
smd solder fillet (1 message)
Smt Connector Defects (2 messages)
SMT Line & ESD (2 messages)
SMT low cost soldering machine for prototyping and repairs. (2 messages)
SNEC Meeting (1 message)
Solder creep characteristics (1 message)
solder mask (2 messages)
Solder Mask & ENIG (1 message)
Solder mask clearance (3 messages)
solder mask crack (1 message)
Something that might be useful to everybody... (1 message)
Space Electronics... (16 messages)
SPAM (1 message)
Spam from Dovebid (4 messages)
Spam on spam? (1 message)
SSteel sintered air mini muffler (1 message)
Strange Cap Terminations (5 messages)
Subj: Mechanical Design Guidelines (2 messages)
Subj: White Tin (4 messages)
Tear drop question for inner layer and outer layer (6 messages)
Technet delay (1 message)
TechNet Digest - 26 Jul 2000 (#2000-459) (1 message)
test (1 message)
Tester (1 message)
Thermal stress/shock profile for loaded board (1 message)
Tolerance on board thickness (11 messages)
TR: search for standard (1 message)
Trudril 105 (1 message)
Universal OFS (1 message)
Universal OFS system (1 message)
V-Score board separation (5 messages)
Virus Warning: Jokes (1 message)
Was"Bubbly Soldermask",Now: How I took the pics.. (1 message)
wave soldering caps? (2 messages)
Wave soldering machine wanted (2 messages)
Wave Soldering Types (3 messages)
Wave Solering SOT23 (5 messages)
Wavesoldering and in-line water cleaner (3 messages)

LISTSERV Archives

LISTSERV Archives

TECHNET Home

TECHNET Home

Subject Sorted by Subject, Chronologically

From

Date

Size

Re:

Hans Shin <[log in to unmask]>

Wed, 19 Jul 2000 10:31:09 -0700

63 lines

Re:

Dieselberg, Ron <[log in to unmask]>

Wed, 19 Jul 2000 13:42:58 -0400

58 lines

Re:

Russ Bafford <[log in to unmask]>

Wed, 19 Jul 2000 13:42:35 -0400

62 lines

Re:

William T. (Tom) Taylor <[log in to unmask]>

Wed, 19 Jul 2000 14:13:00 -0400

71 lines

Re:

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Tue, 25 Jul 2000 13:15:12 +0100

124 lines

New Thread

"Bubbly Soldermask..."

"Bubbly Soldermask..."

Stephen R. Gregory <[log in to unmask]>

Wed, 26 Jul 2000 15:11:04 EDT

41 lines

Re: "Bubbly Soldermask..."

Carano,Michael <[log in to unmask]>

Wed, 26 Jul 2000 15:31:10 -0400

87 lines

Re: "Bubbly Soldermask..."

Dieselberg, Ron <[log in to unmask]>

Wed, 26 Jul 2000 15:37:56 -0400

71 lines

Re: "Bubbly Soldermask..."

Goldman, Patricia J. <[log in to unmask]>

Wed, 26 Jul 2000 15:49:48 -0400

101 lines

Re: "Bubbly Soldermask..."

Ryan Grant <[log in to unmask]>

Wed, 26 Jul 2000 14:37:02 -0600

149 lines

Re: "Bubbly Soldermask..."

Nelson, John <[log in to unmask]>

Wed, 26 Jul 2000 17:03:11 -0400

31 lines

Re: "Bubbly Soldermask..."

Stephen R. Gregory <[log in to unmask]>

Wed, 26 Jul 2000 17:14:39 EDT

47 lines

Re: "Bubbly Soldermask..."

Larry Koens <[log in to unmask]>

Wed, 26 Jul 2000 16:27:35 -0500

80 lines

Re: "Bubbly Soldermask..."

Kelly M. Schriver <[log in to unmask]>

Wed, 26 Jul 2000 19:51:01 -0500

78 lines

Re: "Bubbly Soldermask..."

Brian Ellis <[log in to unmask]>

Thu, 27 Jul 2000 10:00:32 +0300

78 lines

Re: "Bubbly Soldermask..."

Goldman, Patricia J. <[log in to unmask]>

Thu, 27 Jul 2000 08:24:05 -0400

89 lines

Re: "Bubbly Soldermask..."

Smith Russell MSM LAPO US <[log in to unmask]>

Thu, 27 Jul 2000 19:12:00 +0200

78 lines

Re: "Bubbly Soldermask..."

Peter Menuez <[log in to unmask]>

Thu, 27 Jul 2000 16:47:58 -0700

199 lines

Re: "Bubbly Soldermask..."

Stephen R. Gregory <[log in to unmask]>

Thu, 27 Jul 2000 21:37:53 EDT

69 lines

Re: "Bubbly Soldermask..."

Brian Ellis <[log in to unmask]>

Fri, 28 Jul 2000 12:01:38 +0300

230 lines

Re: "Bubbly Soldermask..."

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 28 Jul 2000 16:57:11 +0100

288 lines

Re: "Bubbly Soldermask..."

Jim Gilbert <[log in to unmask]>

Fri, 28 Jul 2000 09:27:13 -0400

236 lines

Re: "Bubbly Soldermask..."

Carano,Michael <[log in to unmask]>

Fri, 28 Jul 2000 13:19:54 -0400

243 lines

Re: "Bubbly Soldermask..."

Brian Ellis <[log in to unmask]>

Fri, 28 Jul 2000 20:37:29 +0300

255 lines

Re: "Bubbly Soldermask..."

Smith Russell MSM LAPO US <[log in to unmask]>

Fri, 28 Jul 2000 21:52:00 +0200

250 lines

Re: "Bubbly Soldermask..."

Peter Menuez <[log in to unmask]>

Sat, 29 Jul 2000 07:00:20 -0700

177 lines

Re: "Bubbly Soldermask..."

Peter Menuez <[log in to unmask]>

Sat, 29 Jul 2000 07:37:20 -0700

280 lines

Re: "Bubbly Soldermask..."

Peter Menuez <[log in to unmask]>

Sat, 29 Jul 2000 07:51:00 -0700

246 lines

Re: "Bubbly Soldermask..."

Peter Menuez <[log in to unmask]>

Sat, 29 Jul 2000 08:34:20 -0700

273 lines

New Thread

"Bubbly Soldermask..." Digital Pics

Re: "Bubbly Soldermask..." Digital Pics

Mike Sewell <[log in to unmask]>

Wed, 26 Jul 2000 17:09:19 EDT

32 lines

Re: "Bubbly Soldermask..." Digital Pics

Eric Kalgren <[log in to unmask]>

Wed, 26 Jul 2000 15:40:15 -0600

63 lines

New Thread

"Technology Associates" - Bud Trapp and Semiconductor Re liability

Re: "Technology Associates" - Bud Trapp and Semiconductor Re liability

Ingemar Hernefjord (EMW) <[log in to unmask]>

Thu, 6 Jul 2000 17:41:43 +0200

78 lines

New Thread

"Technology Associates" - Bud Trapp and Semiconductor Reliability

"Technology Associates" - Bud Trapp and Semiconductor Reliability

John Brewer <[log in to unmask]>

Thu, 6 Jul 2000 07:45:23 -0400

33 lines

Re: "Technology Associates" - Bud Trapp and Semiconductor Reliability

Stephen R. Gregory <[log in to unmask]>

Thu, 6 Jul 2000 08:45:47 EDT

52 lines

New Thread

(TN) Reflow Issue

Re: (TN) Reflow Issue

Jeffery L. Hempton <[log in to unmask]>

Tue, 18 Jul 2000 11:56:26 -0400

114 lines

Re: (TN) Reflow Issue

Furrow, Robert Gordon (Bob) <[log in to unmask]>

Tue, 18 Jul 2000 13:41:40 -0400

173 lines

New Thread

(TN) SMT Line & ESD

(TN) SMT Line & ESD

Jeffery L. Hempton <[log in to unmask]>

Tue, 18 Jul 2000 07:46:36 -0400

82 lines

New Thread

0402 inspection

0402 inspection

Ken Fong <[log in to unmask]>

Thu, 6 Jul 2000 10:53:37 +0800

32 lines

Re: 0402 inspection

Stephen R. Gregory <[log in to unmask]>

Wed, 5 Jul 2000 23:14:20 EDT

52 lines

Re: 0402 inspection

Ryan Grant <[log in to unmask]>

Thu, 6 Jul 2000 08:09:21 -0600

72 lines

Re: 0402 inspection

Ken Fong <[log in to unmask]>

Fri, 7 Jul 2000 09:27:34 +0800

90 lines

New Thread

100% Non-Aqueous Cleaners

100% Non-Aqueous Cleaners

Bev Christian <[log in to unmask]>

Fri, 28 Jul 2000 08:05:23 -0400

34 lines

Re: 100% Non-Aqueous Cleaners

Phil Nutting <[log in to unmask]>

Fri, 28 Jul 2000 09:16:06 -0400

85 lines

Re: 100% Non-Aqueous Cleaners

Howieson, Rick <[log in to unmask]>

Fri, 28 Jul 2000 08:04:01 -0600

110 lines

Re: 100% Non-Aqueous Cleaners

Bev Christian <[log in to unmask]>

Fri, 28 Jul 2000 13:35:37 -0400

108 lines

Re: 100% Non-Aqueous Cleaners

Brian Ellis <[log in to unmask]>

Fri, 28 Jul 2000 20:50:08 +0300

65 lines

Re: 100% Non-Aqueous Cleaners

Bev Christian <[log in to unmask]>

Fri, 28 Jul 2000 13:55:26 -0400

94 lines

Re: 100% Non-Aqueous Cleaners

Barmuta, Mike <[log in to unmask]>

Fri, 28 Jul 2000 11:32:14 -0700

144 lines

Re: 100% Non-Aqueous Cleaners

Kasprzak, Bill (esd) USX <[log in to unmask]>

Fri, 28 Jul 2000 14:49:53 -0400

70 lines

Re: 100% Non-Aqueous Cleaners

Phil Nutting <[log in to unmask]>

Fri, 28 Jul 2000 15:06:37 -0400

100 lines

Re: 100% Non-Aqueous Cleaners

Brian Ellis <[log in to unmask]>

Sat, 29 Jul 2000 09:20:33 +0300

153 lines

Re: 100% Non-Aqueous Cleaners

Paul Klasek <[log in to unmask]>

Mon, 31 Jul 2000 08:21:41 +1000

139 lines

Re: 100% Non-Aqueous Cleaners

Bev Christian <[log in to unmask]>

Mon, 31 Jul 2000 08:09:07 -0400

206 lines

New Thread

1206 Capacitors on 1812 Pads

Re: 1206 Capacitors on 1812 Pads

Grant Emandien <[log in to unmask]>

Mon, 3 Jul 2000 11:28:52 +0200

88 lines

New Thread

3 oz material

3 oz material

Steve Collins <[log in to unmask]>

Thu, 20 Jul 2000 14:53:11 -0600

25 lines

Re: 3 oz material

Brooks Bill <[log in to unmask]>

Thu, 20 Jul 2000 14:10:46 -0700

52 lines

3 oz material

Steve Collins <[log in to unmask]>

Fri, 21 Jul 2000 11:26:35 -0600

31 lines

Re: 3 oz material

Franklin D Asbell <[log in to unmask]>

Fri, 21 Jul 2000 13:30:09 -0500

62 lines

Re: 3 oz material

Russ Bafford <[log in to unmask]>

Mon, 24 Jul 2000 11:13:44 -0400

70 lines

Re: 3 oz material

Franklin D Asbell <[log in to unmask]>

Mon, 24 Jul 2000 12:08:33 -0500

97 lines

New Thread

<No subject>

<No subject>

Graham Naisbitt <[log in to unmask]>

Fri, 7 Jul 2000 14:27:27 +0100

48 lines

<No subject>

Ketan Bhatt <[log in to unmask]>

Tue, 18 Jul 2000 10:53:50 +0530

44 lines

<No subject>

Rhonda Trainor <[log in to unmask]>

Tue, 18 Jul 2000 16:03:54 -0400

51 lines

<No subject>

Andy Thibeault <[log in to unmask]>

Wed, 19 Jul 2000 13:26:28 -0400

31 lines

<No subject>

Rhonda Trainor <[log in to unmask]>

Mon, 24 Jul 2000 09:09:57 -0400

66 lines

<No subject>

TINA _CHEN(陳秀婷) <[log in to unmask]>

Wed, 26 Jul 2000 09:19:06 +0800

23 lines

New Thread

Accelerated Testing

Accelerated Testing

Craig Hillman <[log in to unmask]>

Mon, 24 Jul 2000 13:44:22 -0400

45 lines

New Thread

Adhesive contamintation

Adhesive contamintation

Becerra Alejandro <[log in to unmask]>

Fri, 14 Jul 2000 16:50:57 -0500

528 lines

Re: Adhesive contamintation

Pat Kane <[log in to unmask]>

Mon, 17 Jul 2000 09:51:30 EDT

48 lines

Re: Adhesive contamintation

Charlie Pitarys <[log in to unmask]>

Tue, 18 Jul 2000 11:25:55 -0400

78 lines

New Thread

Adhesive over pads.

Adhesive over pads.

Becerra Alejandro <[log in to unmask]>

Thu, 13 Jul 2000 09:24:46 -0500

44 lines

Re: Adhesive over pads.

McMonagle, Mike <[log in to unmask]>

Thu, 13 Jul 2000 10:53:52 -0400

88 lines

Re: Adhesive over pads.

Smith, Gary <[log in to unmask]>

Thu, 13 Jul 2000 11:04:35 -0400

659 lines

Re: Adhesive over pads.

Becerra Alejandro <[log in to unmask]>

Thu, 13 Jul 2000 11:19:06 -0500

209 lines

Re: Adhesive over pads.

Smith, Gary <[log in to unmask]>

Thu, 13 Jul 2000 13:34:06 -0400

31 lines

Re: Adhesive over pads.

McMonagle, Mike <[log in to unmask]>

Thu, 13 Jul 2000 16:09:07 -0400

263 lines

New Thread

Adhesive Printing (Was: Mounting)

Adhesive Printing (Was: Mounting)

McMonagle, Mike <[log in to unmask]>

Fri, 21 Jul 2000 09:15:14 -0400

81 lines

New Thread

adhesive remover

adhesive remover

John Brewer <[log in to unmask]>

Fri, 14 Jul 2000 09:29:01 -0400

26 lines

New Thread

Adhesive Remover for artwork

Adhesive Remover for artwork

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 13 Jul 2000 21:41:09 +0100

49 lines

Re: Adhesive Remover for artwork

Roger M. Stoops <[log in to unmask]>

Thu, 13 Jul 2000 21:07:57 +0000

107 lines

Re: Adhesive Remover for artwork

Mike Sewell <[log in to unmask]>

Thu, 13 Jul 2000 17:39:38 EDT

28 lines

Re: Adhesive Remover for artwork

Keel, Mike <[log in to unmask]>

Thu, 13 Jul 2000 14:48:11 -0700

87 lines

Re: Adhesive Remover for artwork

Mike Fenner <[log in to unmask]>

Fri, 14 Jul 2000 00:14:40 +0100

87 lines

Re: Adhesive Remover for artwork

Brian Ellis <[log in to unmask]>

Fri, 14 Jul 2000 11:48:20 +0300

89 lines

Re: Adhesive Remover for artwork

Smith, Gary <[log in to unmask]>

Fri, 14 Jul 2000 07:28:21 -0400

94 lines

Re: Adhesive Remover for artwork

Lee Whiteman <[log in to unmask]>

Fri, 14 Jul 2000 11:19:02 -0400

103 lines

Re: Adhesive Remover for artwork

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 14 Jul 2000 15:41:17 -0400

52 lines

Re: Adhesive Remover for artwork

Dieselberg, Ron <[log in to unmask]>

Mon, 17 Jul 2000 07:53:38 -0400

78 lines

Re: Adhesive Remover for artwork

Brooks Bill <[log in to unmask]>

Mon, 17 Jul 2000 08:35:08 -0700

106 lines

Re: Adhesive Remover for artwork

Mike Fenner <[log in to unmask]>

Tue, 18 Jul 2000 22:16:40 +0100

157 lines

New Thread

Admin Test Message

Admin Test Message

Jack Crawford <[log in to unmask]>

Sun, 16 Jul 2000 15:58:57 -0500

25 lines

New Thread

air entrapment with conformal coating

air entrapment with conformal coating

Jean-Francois Bissonnette <[log in to unmask]>

Fri, 14 Jul 2000 10:50:14 -0400

39 lines

New Thread

Air Puck

Air Puck

John Brewer <[log in to unmask]>

Mon, 10 Jul 2000 13:04:16 -0400

28 lines

Re: Air Puck

Alain Savard <[log in to unmask]>

Mon, 10 Jul 2000 13:20:32 -0400

62 lines

New Thread

AMP Mictor connectors

AMP Mictor connectors

Tim stammely <[log in to unmask]>

Fri, 28 Jul 2000 11:02:29 -0700

46 lines

AMP Mictor connectors

Tim stammely <[log in to unmask]>

Fri, 28 Jul 2000 11:02:47 -0700

46 lines

Re: AMP Mictor connectors

gacrowell <[log in to unmask]>

Fri, 28 Jul 2000 15:13:39 -0600

89 lines

Re: AMP Mictor connectors

gacrowell <[log in to unmask]>

Fri, 28 Jul 2000 15:30:30 -0600

82 lines

New Thread

Antw: [TN] Solder creep characteristics

Antw: [TN] Solder creep characteristics

Guenter Grossmann <[log in to unmask]>

Tue, 11 Jul 2000 16:17:57 +0200

50 lines

New Thread

AOI

AOI

Dave Kell <[log in to unmask]>

Thu, 20 Jul 2000 14:31:40 -0500

31 lines

New Thread

Assy Question about pin length through the board....Y'all

Assy Question about pin length through the board....Y'all

Barbara Burcham <[log in to unmask]>

Thu, 27 Jul 2000 09:41:43 -0500

37 lines

Re: Assy Question about pin length through the board....Y'all

Phil Crepeau <[log in to unmask]>

Thu, 27 Jul 2000 07:55:00 -0700

61 lines

New Thread

Bellcore GR-78 ...

Bellcore GR-78 ...

Doug McKean <[log in to unmask]>

Tue, 25 Jul 2000 21:55:33 -0700

71 lines

New Thread

Bent Leads on PLCC's

Bent Leads on PLCC's

Mike Lang <[log in to unmask]>

Tue, 25 Jul 2000 10:07:08 -0400

105 lines

Re: Bent Leads on PLCC's

Zoran Raich <[log in to unmask]>

Wed, 26 Jul 2000 10:27:26 +1000

87 lines

New Thread

Best books on Electronic Assembly

Re: Best books on Electronic Assembly

Lee Whiteman <[log in to unmask]>

Thu, 20 Jul 2000 08:36:13 -0400

225 lines

Re: Best books on Electronic Assembly

d. terstegge <[log in to unmask]>

Thu, 20 Jul 2000 15:56:24 +0200

101 lines

Best books on Electronic Assembly

Alain Mathieu <[log in to unmask]>

Sat, 22 Jul 2000 09:10:26 -0400

29 lines

New Thread

Best books oon Electronic Assembly

Best books oon Electronic Assembly

Alain Mathieu <[log in to unmask]>

Thu, 20 Jul 2000 07:36:34 -0400

83 lines

Re: Best books oon Electronic Assembly

Roberts Jon <[log in to unmask]>

Thu, 20 Jul 2000 07:01:50 -0500

109 lines

Re: Best books oon Electronic Assembly

Stephen R. Gregory <[log in to unmask]>

Thu, 20 Jul 2000 09:15:44 EDT

50 lines

Re: Best books oon Electronic Assembly

Brian Ellis <[log in to unmask]>

Thu, 20 Jul 2000 16:35:24 +0300

48 lines

New Thread

BGA bridging...

BGA bridging...

Stephen R. Gregory <[log in to unmask]>

Fri, 21 Jul 2000 20:42:46 EDT

52 lines

Re: BGA bridging...

Gabriela Bogdan <[log in to unmask]>

Sat, 22 Jul 2000 09:38:34 +0300

79 lines

Re: BGA bridging...

Werner Engelmaier <[log in to unmask]>

Sat, 22 Jul 2000 19:35:27 EDT

28 lines

Re: BGA bridging...

d. terstegge <[log in to unmask]>

Mon, 24 Jul 2000 09:58:43 +0200

96 lines

Re: BGA bridging...

joyce <[log in to unmask]>

Mon, 24 Jul 2000 08:41:04 -0400

109 lines

Re: BGA bridging...

Ryan Grant <[log in to unmask]>

Mon, 24 Jul 2000 16:08:52 -0600

97 lines

New Thread

BGA Reflow Problems

BGA Reflow Problems

Jason Gregory <[log in to unmask]>

Wed, 12 Jul 2000 16:18:13 -0500

44 lines

Re: BGA Reflow Problems

Stephen R. Gregory <[log in to unmask]>

Wed, 12 Jul 2000 20:05:58 EDT

60 lines

Re: BGA Reflow Problems

Jason Gregory <[log in to unmask]>

Thu, 13 Jul 2000 05:52:52 -0500

97 lines

Re: BGA Reflow Problems

Edward J. Valentine <[log in to unmask]>

Thu, 13 Jul 2000 08:57:47 -0400

88 lines

Re: BGA Reflow Problems

Ryan Grant <[log in to unmask]>

Thu, 13 Jul 2000 10:52:58 -0600

95 lines

Re: BGA Reflow Problems

Taheri, Kamran <[log in to unmask]>

Thu, 13 Jul 2000 12:49:21 -0500

122 lines

New Thread

Board materials - FR4 vs CEM3

Board materials - FR4 vs CEM3

Brooks Bill <[log in to unmask]>

Thu, 6 Jul 2000 08:19:41 -0700

241 lines

Board materials - FR4 vs CEM3

Susan James <[log in to unmask]>

Thu, 6 Jul 2000 13:56:33 -0500

67 lines

New Thread

board photos (was RE: [TN] "Bubbly Soldermask...")

Re: board photos (was RE: [TN] "Bubbly Soldermask...")

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 27 Jul 2000 20:28:07 +0100

86 lines

Re: board photos (was RE: [TN] "Bubbly Soldermask...")

Franklin D Asbell <[log in to unmask]>

Thu, 27 Jul 2000 15:51:42 -0500

106 lines

Re: board photos (was RE: [TN] "Bubbly Soldermask...")

Stephen R. Gregory <[log in to unmask]>

Thu, 27 Jul 2000 17:01:33 EDT

41 lines

New Thread

Bob Willis Online At SMTnet Now!

Bob Willis Online At SMTnet Now!

McMonagle, Mike <[log in to unmask]>

Thu, 20 Jul 2000 16:07:27 -0400

29 lines

New Thread

Bubbly not technical

Bubbly not technical

Gabriela Bogdan <[log in to unmask]>

Sun, 30 Jul 2000 02:49:01 +0300

32 lines

New Thread

CALL FOR PAPERS - IPC 5th Annual Conference on High Density Interconnect Structures (HDIS)

CALL FOR PAPERS - IPC 5th Annual Conference on High Density Interconnect Structures (HDIS)

Leslie Zaitz <[log in to unmask]>

Fri, 7 Jul 2000 13:25:55 -0500

1484 lines

New Thread

CAM350 software recommendation

CAM350 software recommendation

Le Dai Tri <[log in to unmask]>

Tue, 11 Jul 2000 09:46:34 +0700

112 lines

Re: CAM350 software recommendation

Roland Jaquet <[log in to unmask]>

Tue, 11 Jul 2000 08:22:06 +0200

183 lines

Re: CAM350 software recommendation

Matthias Mansfeld <[log in to unmask]>

Tue, 11 Jul 2000 12:37:27 +0200

78 lines

New Thread

Carbon ink outside services???

Carbon ink outside services???

David Coleman <[log in to unmask]>

Thu, 13 Jul 2000 10:40:00 -0400

25 lines

Re: Carbon ink outside services???

John J Walker <[log in to unmask]>

Thu, 13 Jul 2000 15:01:39 -0400

52 lines

New Thread

Carrier Tape

Carrier Tape

Harold Papazian <[log in to unmask]>

Wed, 5 Jul 2000 16:08:54 -0500

29 lines

Re: Carrier Tape

Stephen R. Gregory <[log in to unmask]>

Wed, 5 Jul 2000 20:23:03 EDT

64 lines

Re: Carrier Tape

Stephen R. Gregory <[log in to unmask]>

Wed, 5 Jul 2000 20:33:24 EDT

36 lines

Re: Carrier Tape

Stewart Gadd <[log in to unmask]>

Thu, 6 Jul 2000 06:52:34 +0100

65 lines

Re: Carrier Tape

Martin Christie <[log in to unmask]>

Thu, 6 Jul 2000 09:08:00 +0100

92 lines

Re: Carrier Tape

Cal Driscoll <[log in to unmask]>

Thu, 6 Jul 2000 07:56:23 -0400

72 lines

New Thread

CBGA 429 in high rel application

CBGA 429 in high rel application

Graham Collins <[log in to unmask]>

Mon, 10 Jul 2000 08:36:50 -0400

47 lines

Re: CBGA 429 in high rel application

Higgins, Leo <[log in to unmask]>

Mon, 10 Jul 2000 09:16:19 -0400

221 lines

Re: CBGA 429 in high rel application

Werner Engelmaier <[log in to unmask]>

Mon, 10 Jul 2000 09:48:15 EDT

51 lines

New Thread

CECC00802 soldering standard

CECC00802 soldering standard

Dave Simmons <[log in to unmask]>

Thu, 20 Jul 2000 14:07:24 +1200

30 lines

New Thread

Cer air mini muffler

Cer air mini muffler

Paul Klasek <[log in to unmask]>

Tue, 25 Jul 2000 14:31:17 +1000

52 lines

Re: Cer air mini muffler

Paul Klasek <[log in to unmask]>

Wed, 26 Jul 2000 09:48:46 +1000

74 lines

New Thread

Change in Dielectric over Temp

Re: Change in Dielectric over Temp

Arturo Aguayo <[log in to unmask]>

Mon, 3 Jul 2000 02:00:46 -0700

593 lines

New Thread

Coffin-Manson Eq.

Coffin-Manson Eq.

Ruby Hazen <[log in to unmask]>

Mon, 31 Jul 2000 15:47:39 PDT

36 lines

New Thread

Complete Liquidation of 2 PCB Mfg Facilities

Complete Liquidation of 2 PCB Mfg Facilities

Walt Custer <[log in to unmask]>

Sat, 8 Jul 2000 10:02:01 -0700

91 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Stephen R. Gregory <[log in to unmask]>

Sat, 8 Jul 2000 20:48:20 EDT

62 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Michael Lester <[log in to unmask]>

Sat, 8 Jul 2000 22:09:33 EDT

25 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Brian Ellis <[log in to unmask]>

Sun, 9 Jul 2000 14:27:27 +0200

126 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Andy Magee <[log in to unmask]>

Sun, 9 Jul 2000 14:52:57 -0400

38 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Stephen R. Gregory <[log in to unmask]>

Sun, 9 Jul 2000 19:03:46 EDT

77 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Mcmaster, Michael <[log in to unmask]>

Tue, 11 Jul 2000 18:15:29 -0700

147 lines

Re: Complete Liquidation of 2 PCB Mfg Facilities

Walt Custer <[log in to unmask]>

Tue, 11 Jul 2000 20:09:13 -0700

165 lines

New Thread

Component weights for double-sided reflow

Component weights for double-sided reflow

Justin Braime <[log in to unmask]>

Fri, 7 Jul 2000 10:02:49 +1200

75 lines

Re: Component weights for double-sided reflow

Stephen R. Gregory <[log in to unmask]>

Thu, 6 Jul 2000 18:34:44 EDT

48 lines

Re: Component weights for double-sided reflow

Ryan Grant <[log in to unmask]>

Thu, 6 Jul 2000 16:30:51 -0600

56 lines

Re: Component weights for double-sided reflow

d. terstegge <[log in to unmask]>

Fri, 7 Jul 2000 09:40:36 +0200

94 lines

New Thread

Conductive rivets

Conductive rivets

Roland Jaquet <[log in to unmask]>

Wed, 19 Jul 2000 16:15:59 +0200

101 lines

Re: Conductive rivets

Brian Ellis <[log in to unmask]>

Wed, 19 Jul 2000 18:10:06 +0300

56 lines

Re: Conductive rivets

mike connolly <[log in to unmask]>

Thu, 20 Jul 2000 04:43:29 -0700

67 lines

New Thread

Conformal Coat question

Conformal Coat question

Steve Collins <[log in to unmask]>

Fri, 7 Jul 2000 13:39:54 -0600

30 lines

Re: Conformal Coat question

Phillips, Peter (NM05) <[log in to unmask]>

Fri, 7 Jul 2000 15:31:04 -0500

78 lines

Re: Conformal Coat question

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 7 Jul 2000 22:12:18 +0100

75 lines

Re: Conformal Coat question

Brooks Bill <[log in to unmask]>

Fri, 7 Jul 2000 14:23:05 -0700

83 lines

New Thread

Connector Problem

Connector Problem

Chafin, Ken G. <[log in to unmask]>

Mon, 24 Jul 2000 14:34:32 -0400

54 lines

New Thread

Controlled Impedance Testing

Controlled Impedance Testing

Scott Stewart <[log in to unmask]>

Fri, 7 Jul 2000 08:45:32 -0500

29 lines

Re: Controlled Impedance Testing

Howieson, Rick <[log in to unmask]>

Fri, 7 Jul 2000 08:19:17 -0600

55 lines

Re: Controlled Impedance Testing

Hiteshew, Michael <[log in to unmask]>

Fri, 7 Jul 2000 10:41:52 -0400

86 lines

Re: Controlled Impedance Testing

Smith, Gary <[log in to unmask]>

Fri, 7 Jul 2000 11:03:40 -0400

37 lines

New Thread

Coplanarity measurements

Coplanarity measurements

Lou Hart <[log in to unmask]>

Wed, 12 Jul 2000 10:47:54 -0400

43 lines

Re: Coplanarity measurements

Glenn Pelkey <[log in to unmask]>

Wed, 12 Jul 2000 10:20:33 PDT

63 lines

New Thread

Copper plug heat sinks

Copper plug heat sinks

Timothy Reeves <[log in to unmask]>

Wed, 5 Jul 2000 18:00:41 -0700

32 lines

New Thread

Copy of your own Posts

Re: Copy of your own Posts

Keach Sasamori <[log in to unmask]>

Wed, 5 Jul 2000 16:20:50 -0500

63 lines

New Thread

DCA to static contact angle

DCA to static contact angle

Budiman Salam <[log in to unmask]>

Fri, 21 Jul 2000 11:35:06 +0100

33 lines

Re: DCA to static contact angle

David Whalley <[log in to unmask]>

Fri, 21 Jul 2000 15:22:56 +0100

58 lines

New Thread

Design Rules; RE: Component Spacing

Design Rules; RE: Component Spacing

Smith, Gary <[log in to unmask]>

Mon, 24 Jul 2000 15:14:00 -0400

29 lines

Re: Design Rules; RE: Component Spacing

Eric Miller <[log in to unmask]>

Mon, 24 Jul 2000 12:53:01 -0700

72 lines

Re: Design Rules; RE: Component Spacing

Finlay Buchan <[log in to unmask]>

Tue, 25 Jul 2000 09:30:47 +0100

76 lines

New Thread

ED vs. RS Vib system

ED vs. RS Vib system

Ruby Hazen <[log in to unmask]>

Tue, 18 Jul 2000 11:08:29 PDT

35 lines

Re: ED vs. RS Vib system

Stephen R. Gregory <[log in to unmask]>

Tue, 18 Jul 2000 19:36:50 EDT

63 lines

Re: ED vs. RS Vib system

Craig Hillman <[log in to unmask]>

Thu, 20 Jul 2000 09:21:34 -0400

119 lines

New Thread

Electrical testing

Electrical testing

Mirka Halas <[log in to unmask]>

Tue, 18 Jul 2000 14:26:35 -0400

61 lines

Re: Electrical testing

Franklin D Asbell <[log in to unmask]>

Tue, 18 Jul 2000 15:34:58 -0500

89 lines

New Thread

EMI/RFIMilStds

EMI/RFIMilStds

James H Moffitt <[log in to unmask]>

Wed, 26 Jul 2000 22:34:36 EDT

30 lines

New Thread

Epoxy Underfill

Epoxy Underfill

Jonathan A Noquil <[log in to unmask]>

Thu, 27 Jul 2000 11:29:42 +0800

32 lines

New Thread

Equipment moving.

Equipment moving.

Barry Gallegos <[log in to unmask]>

Mon, 10 Jul 2000 08:02:13 -0600

234 lines

Re: Equipment moving.

Stephen R. Gregory <[log in to unmask]>

Mon, 10 Jul 2000 10:43:09 EDT

46 lines

Re: Equipment moving.

Lee Whiteman <[log in to unmask]>

Mon, 10 Jul 2000 11:22:28 -0400

365 lines

Re: Equipment moving.

David Fish <[log in to unmask]>

Mon, 10 Jul 2000 12:46:35 -0700

178 lines

New Thread

Failure Analysis

Failure Analysis

Jeffery L. Hempton <[log in to unmask]>

Mon, 17 Jul 2000 08:06:43 -0400

44 lines

Re: Failure Analysis

Stephen R. Gregory <[log in to unmask]>

Mon, 17 Jul 2000 10:07:42 EDT

55 lines

Failure analysis

Jason Larson, AScT <[log in to unmask]>

Wed, 19 Jul 2000 10:54:59 -0700

44 lines

Re: Failure analysis

Kang Zhang <[log in to unmask]>

Wed, 19 Jul 2000 15:31:44 EDT

80 lines

Re: Failure analysis

Pat Kane <[log in to unmask]>

Fri, 21 Jul 2000 15:09:01 EDT

61 lines

Re: Failure analysis

Jason Larson, AScT <[log in to unmask]>

Mon, 24 Jul 2000 08:12:09 -0700

90 lines

Re: Failure analysis

joyce <[log in to unmask]>

Mon, 24 Jul 2000 11:47:31 -0400

115 lines

New Thread

Filled via holes

Re: Filled via holes

Gabriela Bogdan <[log in to unmask]>

Sat, 1 Jul 2000 12:24:16 +0300

92 lines

New Thread

Final finishes

Final finishes

Don Anderson <[log in to unmask]>

Thu, 27 Jul 2000 13:30:38 -0400

70 lines

Re: Final finishes

Wenger, George M (George) <[log in to unmask]>

Thu, 27 Jul 2000 13:51:41 -0400

61 lines

Re: Final finishes

Paul Klasek <[log in to unmask]>

Fri, 28 Jul 2000 08:06:13 +1000

89 lines

New Thread

Flash

Flash

michael <[log in to unmask]>

Wed, 19 Jul 2000 19:29:29 +0800

39 lines

Re: Flash

Roger M. Stoops <[log in to unmask]>

Wed, 19 Jul 2000 14:37:55 +0000

123 lines

Re: Flash

Ahne Oosterhof <[log in to unmask]>

Wed, 19 Jul 2000 08:16:14 -0700

97 lines

New Thread

Flipchip underfill

Flipchip underfill

Erat, Wolfgang <[log in to unmask]>

Thu, 6 Jul 2000 15:22:00 -0400

82 lines

Re: Flipchip underfill

Higgins, Leo <[log in to unmask]>

Thu, 6 Jul 2000 17:42:20 -0400

131 lines

Re: Flipchip underfill

Stephen R. Gregory <[log in to unmask]>

Thu, 6 Jul 2000 18:02:32 EDT

83 lines

New Thread

Flying probe tester

Flying probe tester

KK Chin <[log in to unmask]>

Mon, 17 Jul 2000 10:38:57 -0700

33 lines

Re: Flying probe tester

Franklin D Asbell <[log in to unmask]>

Mon, 17 Jul 2000 14:15:55 -0500

58 lines

New Thread

FR2

FR2

Michael Lester <[log in to unmask]>

Thu, 20 Jul 2000 16:22:09 EDT

25 lines

Re: FR2

Lyle Wallig <[log in to unmask]>

Thu, 20 Jul 2000 19:09:20 EDT

26 lines

Re: FR2

이민수 차장 전자 연구소연구2팀 <[log in to unmask]>

Fri, 21 Jul 2000 08:55:56 +0900

65 lines

New Thread

FW: ESD Trays

FW: ESD Trays

Carl Barnes <[log in to unmask]>

Wed, 5 Jul 2000 13:58:59 -0700

52 lines

New Thread

Fw: Re: [TN] Serialization of boards

Fw: Re: [TN] Serialization of boards

Russ Bafford <[log in to unmask]>

Fri, 14 Jul 2000 11:52:56 -0400

28 lines

New Thread

Fw: Thermal stress/shock profile for loaded board

Fw: Thermal stress/shock profile for loaded board

Ketan Bhatt <[log in to unmask]>

Thu, 20 Jul 2000 11:03:23 +0530

74 lines

New Thread

Fw: [TN] BGA bridging...

Fw: [TN] BGA bridging...

Ed Valentine <[log in to unmask]>

Mon, 24 Jul 2000 09:43:59 -0400

144 lines

New Thread

Glass Transition Temperature (Tg) Questions

Glass Transition Temperature (Tg) Questions

Hiteshew, Michael <[log in to unmask]>

Wed, 12 Jul 2000 12:05:41 -0400

45 lines

Re: Glass Transition Temperature (Tg) Questions

McGlaughlin, Jeffrey A <[log in to unmask]>

Wed, 12 Jul 2000 12:18:22 -0400

53 lines

Re: Glass Transition Temperature (Tg) Questions

Alain Savard <[log in to unmask]>

Wed, 12 Jul 2000 12:35:37 -0400

67 lines

Re: Glass Transition Temperature (Tg) Questions

Bob Dube <[log in to unmask]>

Wed, 12 Jul 2000 13:53:46 -0400

77 lines

Re: Glass Transition Temperature (Tg) Questions

Mike Fenner <[log in to unmask]>

Wed, 12 Jul 2000 22:19:55 +0100

113 lines

Re: Glass Transition Temperature (Tg) Questions

michael <[log in to unmask]>

Thu, 13 Jul 2000 10:15:25 +0800

142 lines

Re: Glass Transition Temperature (Tg) Questions

Colin W.T. McVean <[log in to unmask]>

Thu, 13 Jul 2000 11:05:22 +0100

174 lines

Re: Glass Transition Temperature (Tg) Questions

Alain Savard <[log in to unmask]>

Thu, 13 Jul 2000 07:40:47 -0400

233 lines

Re: Glass Transition Temperature (Tg) Questions

Timothy Reeves <[log in to unmask]>

Thu, 13 Jul 2000 11:21:38 -0700

45 lines

Re: Glass Transition Temperature (Tg) Questions

Phil Crepeau <[log in to unmask]>

Thu, 13 Jul 2000 12:00:20 -0700

71 lines

Re: Glass Transition Temperature (Tg) Questions

Mike Fenner <[log in to unmask]>

Thu, 13 Jul 2000 17:27:28 +0100

199 lines

Re: Glass Transition Temperature (Tg) Questions

Brian Ellis <[log in to unmask]>

Fri, 14 Jul 2000 14:33:44 +0300

101 lines

New Thread

GMP (FDA Requirements)

GMP (FDA Requirements)

Rich Lasko <[log in to unmask]>

Mon, 24 Jul 2000 11:19:39 -0500

33 lines

Re: GMP (FDA Requirements)

McMonagle, Mike <[log in to unmask]>

Mon, 24 Jul 2000 12:40:08 -0400

78 lines

New Thread

Gold Finger Repair

Gold Finger Repair

Dale Marcum <[log in to unmask]>

Mon, 10 Jul 2000 06:38:20 -0700

36 lines

Re: Gold Finger Repair

Peter Swanson <[log in to unmask]>

Wed, 12 Jul 2000 13:27:43 GMT

56 lines

New Thread

HALT and HASS

HALT and HASS

Grant Emandien <[log in to unmask]>

Thu, 20 Jul 2000 12:40:34 +0200

103 lines

HALT and HASS

John Brewer <[log in to unmask]>

Thu, 20 Jul 2000 12:03:15 -0400

57 lines

Re: HALT and HASS

Ken Patel <[log in to unmask]>

Thu, 20 Jul 2000 12:29:50 -0700

92 lines

Re: HALT and HASS

Brent Stayer <[log in to unmask]>

Thu, 20 Jul 2000 16:06:37 -0400

232 lines

Re: HALT and HASS

Brent Stayer <[log in to unmask]>

Thu, 20 Jul 2000 16:20:52 -0400

238 lines

New Thread

heat pipe for laptop

heat pipe for laptop

joyce <[log in to unmask]>

Thu, 27 Jul 2000 20:58:04 -0400

30 lines

Re: heat pipe for laptop

Phil Crepeau <[log in to unmask]>

Mon, 31 Jul 2000 09:18:56 -0700

60 lines

Re: heat pipe for laptop

joyce <[log in to unmask]>

Mon, 31 Jul 2000 18:53:16 -0400

85 lines

New Thread

hi rajesh

Re: hi rajesh

To My E-Mail Address <[log in to unmask]>

Wed, 12 Jul 2000 09:18:38 EDT

32 lines

New Thread

Holy-moly!! "Bubbly Soldermask..."

Re: Holy-moly!! "Bubbly Soldermask..."

Stephen R. Gregory <[log in to unmask]>

Sat, 29 Jul 2000 19:25:03 EDT

53 lines

Re: Holy-moly!! "Bubbly Soldermask..."

Brian Ellis <[log in to unmask]>

Sun, 30 Jul 2000 09:59:18 +0300

78 lines

New Thread

Imaging with Silk screen / Compound of copper for vias and Multilayers vias

Imaging with Silk screen / Compound of copper for vias and Multilayers vias

Roland Jaquet <[log in to unmask]>

Wed, 19 Jul 2000 16:33:49 +0200

107 lines

New Thread

Immersion tin & soldermask compatibility

Immersion tin & soldermask compatibility

Frank Oberholtzer <[log in to unmask]>

Wed, 19 Jul 2000 18:32:06 -0400

40 lines

New Thread

Impedance Coupons

Impedance Coupons

Dave Kell <[log in to unmask]>

Wed, 26 Jul 2000 16:00:03 -0500

29 lines

Re: Impedance Coupons

Dave Kell <[log in to unmask]>

Thu, 27 Jul 2000 07:30:58 -0500

64 lines

New Thread

In Line Optical Inspection for SMD

In Line Optical Inspection for SMD

Steffen, Don E <[log in to unmask]>

Sat, 29 Jul 2000 08:25:08 -0500

35 lines

New Thread

In need of Very fine / spacing Flex PWB Manufacturer

In need of Very fine / spacing Flex PWB Manufacturer

Roland Jaquet <[log in to unmask]>

Mon, 3 Jul 2000 08:21:38 +0200

134 lines

New Thread

in-rush current

in-rush current

Jean Frigault <[log in to unmask]>

Thu, 20 Jul 2000 11:01:51 -0300

43 lines

Re: in-rush current

Gaetan Fournier <[log in to unmask]>

Thu, 20 Jul 2000 10:16:54 -0400

69 lines

New Thread

Inspecting PGAs after wave solder

Inspecting PGAs after wave solder

Eric Kalgren <[log in to unmask]>

Mon, 24 Jul 2000 10:07:07 -0600

39 lines

Re: Inspecting PGAs after wave solder

Stephen R. Gregory <[log in to unmask]>

Mon, 24 Jul 2000 13:35:29 EDT

54 lines

Re: Inspecting PGAs after wave solder

Stephen R. Gregory <[log in to unmask]>

Mon, 24 Jul 2000 18:53:29 EDT

63 lines

Re: Inspecting PGAs after wave solder

d. terstegge <[log in to unmask]>

Tue, 25 Jul 2000 09:19:32 +0200

70 lines

Re: Inspecting PGAs after wave solder

Bogdan Gabi <[log in to unmask]>

Tue, 25 Jul 2000 13:14:49 +0300

218 lines

Re: Inspecting PGAs after wave solder

Tenison Stone <[log in to unmask]>

Tue, 25 Jul 2000 07:00:21 -0500

108 lines

Re: Inspecting PGAs after wave solder

Eric Kalgren <[log in to unmask]>

Tue, 25 Jul 2000 09:32:57 -0600

101 lines

New Thread

Inspection Templates

Inspection Templates

Barry Gallegos <[log in to unmask]>

Mon, 31 Jul 2000 12:28:57 -0600

212 lines

Re: Inspection Templates

Brad L. Matthies <[log in to unmask]>

Mon, 31 Jul 2000 14:19:49 -0500

181 lines

New Thread

Internal radial crack<-partially filled via

Re: Internal radial crack<-partially filled via

Werner Engelmaier <[log in to unmask]>

Tue, 11 Jul 2000 14:06:41 EDT

92 lines

Re: Internal radial crack<-partially filled via

Tim Snodgrass <[log in to unmask]>

Tue, 11 Jul 2000 12:18:52 -0700

105 lines

New Thread

Internal radial crack???

Internal radial crack???

Ken Patel <[log in to unmask]>

Mon, 10 Jul 2000 17:12:32 -0700

44 lines

Re: Internal radial crack???

Shirley Xiao <[log in to unmask]>

Mon, 10 Jul 2000 17:28:19 -0700

87 lines

Re: Internal radial crack???

Werner Engelmaier <[log in to unmask]>

Tue, 11 Jul 2000 08:36:13 EDT

42 lines

Re: Internal radial crack???

Ken Patel <[log in to unmask]>

Tue, 11 Jul 2000 09:52:39 -0700

90 lines

New Thread

IPC Accepting Abstracts for Expo 2001 Technical Conference

IPC Accepting Abstracts for Expo 2001 Technical Conference

Christopher Jorgensen <[log in to unmask]>

Thu, 6 Jul 2000 17:23:01 -0500

74 lines

New Thread

IPC-A-600F Section 3.1.1 Define Zone B Delamination

IPC-A-600F Section 3.1.1 Define Zone B Delamination

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 26 Jul 2000 21:41:51 +0100

59 lines

Re: IPC-A-600F Section 3.1.1 Define Zone B Delamination

Franklin D Asbell <[log in to unmask]>

Wed, 26 Jul 2000 16:28:28 -0500

86 lines

Re: IPC-A-600F Section 3.1.1 Define Zone B Delamination

Gabriela Bogdan <[log in to unmask]>

Thu, 27 Jul 2000 07:45:58 +0300

214 lines

Re: IPC-A-600F Section 3.1.1 Define Zone B Delamination

Smith, David V. <[log in to unmask]>

Thu, 27 Jul 2000 09:56:57 -0500

115 lines

Re: IPC-A-600F Section 3.1.1 Define Zone B Delamination

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 28 Jul 2000 11:48:21 -0400

266 lines

New Thread

IPC356 vs. RS-274X

IPC356 vs. RS-274X

Darrel Therriault <[log in to unmask]>

Thu, 13 Jul 2000 12:55:30 -0700

32 lines

Re: IPC356 vs. RS-274X

Jim Axton <[log in to unmask]>

Thu, 13 Jul 2000 18:11:30 -0700

57 lines

New Thread

ISO Base material with 400 microns of copper

ISO Base material with 400 microns of copper

Roland Jaquet <[log in to unmask]>

Wed, 19 Jul 2000 11:57:07 +0200

97 lines

New Thread

Isolation

Isolation

Rajesh Goutham <[log in to unmask]>

Sat, 29 Jul 2000 02:44:35 -0500

38 lines

Re: Isolation

mike connolly <[log in to unmask]>

Sun, 30 Jul 2000 18:15:19 -0700

92 lines

New Thread

Jokes

Jokes

John J Walker <[log in to unmask]>

Fri, 7 Jul 2000 14:30:32 -0400

725 lines

Re: Jokes

David J. Sanchez <[log in to unmask]>

Mon, 10 Jul 2000 09:52:18 -0700

58 lines

New Thread

Jokes - ATTENTION: message is a virus, DON'T open!

Re: Jokes - ATTENTION: message is a virus, DON'T open!

Hybiske, Tom <[log in to unmask]>

Fri, 7 Jul 2000 15:06:47 -0400

80 lines

New Thread

Jokes CONTAINS WORM

Re: Jokes CONTAINS WORM

Mike Fenner <[log in to unmask]>

Sat, 8 Jul 2000 10:58:55 +0100

36 lines

New Thread

Keeping Jokes and other bugs off our PC's

Re: Keeping Jokes and other bugs off our PC's

Hybiske, Tom <[log in to unmask]>

Mon, 10 Jul 2000 13:41:00 -0400

116 lines

New Thread

Kwickfit panelization

Kwickfit panelization

Luis Alcantra <[log in to unmask]>

Thu, 27 Jul 2000 08:21:00 -0700

34 lines

Re: Kwickfit panelization

John Parsons <[log in to unmask]>

Thu, 27 Jul 2000 08:35:06 -0700

45 lines

New Thread

Large PCB

Large PCB

Jerry Mosur <[log in to unmask]>

Wed, 12 Jul 2000 15:03:12 -0400

35 lines

Re: Large PCB

Mark Simmons <[log in to unmask]>

Wed, 12 Jul 2000 13:02:29 -0700

57 lines

New Thread

Layout Design Guide for MCM

Layout Design Guide for MCM

<Goh Guan Chye> <[log in to unmask]>

Fri, 28 Jul 2000 01:28:37 +0800

29 lines

New Thread

Layout Design Guidelines for MCM, COB

Layout Design Guidelines for MCM, COB

Goh Guan Chye <[log in to unmask]>

Fri, 28 Jul 2000 09:10:41 +0800

32 lines

Re: Layout Design Guidelines for MCM, COB

Smith, Gary <[log in to unmask]>

Fri, 28 Jul 2000 06:58:06 -0400

59 lines

New Thread

LCCC Usage

LCCC Usage

Bill Robinson <[log in to unmask]>

Thu, 20 Jul 2000 10:35:58 -0500

32 lines

Re: LCCC Usage

Mike Lang <[log in to unmask]>

Fri, 21 Jul 2000 14:28:40 -0400

104 lines

Re: LCCC Usage

Brent Stayer <[log in to unmask]>

Fri, 21 Jul 2000 14:30:46 -0400

98 lines

Re: LCCC Usage

Russ Winslow <[log in to unmask]>

Fri, 21 Jul 2000 19:03:57 -0700

79 lines

Re: LCCC Usage

Werner Engelmaier <[log in to unmask]>

Sat, 22 Jul 2000 19:35:31 EDT

29 lines

New Thread

LDI

LDI

Ray Lavallee <[log in to unmask]>

Wed, 12 Jul 2000 14:52:31 -0400

25 lines

Re: LDI

Chuck Brummer <[log in to unmask]>

Wed, 12 Jul 2000 13:06:44 -0700

50 lines

Re: LDI

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 12 Jul 2000 21:02:53 +0100

63 lines

Re: LDI

Joseph E. J. Duclos Jr. <[log in to unmask]>

Wed, 12 Jul 2000 18:28:59 -0400

62 lines

Re: LDI

Ray Lavallee <[log in to unmask]>

Thu, 13 Jul 2000 13:00:16 -0400

97 lines

Re: LDI

IPC TechNet <[log in to unmask]>

Thu, 13 Jul 2000 12:11:51 -0700

122 lines

New Thread

leadtimes for PWB fabs

leadtimes for PWB fabs

Jerry Cupples <[log in to unmask]>

Mon, 10 Jul 2000 16:21:16 -0500

40 lines

Re: leadtimes for PWB fabs

Franklin D Asbell <[log in to unmask]>

Mon, 10 Jul 2000 17:04:39 -0500

76 lines

Re: leadtimes for PWB fabs

Mike Fenner <[log in to unmask]>

Tue, 11 Jul 2000 13:19:09 +0100

108 lines

New Thread

LGX file extension

LGX file extension

Steve Collins <[log in to unmask]>

Mon, 31 Jul 2000 09:54:26 -0600

29 lines

Re: LGX file extension

Ahne Oosterhof <[log in to unmask]>

Mon, 31 Jul 2000 10:18:20 -0700

67 lines

Re: LGX file extension

David Ricketts <[log in to unmask]>

Mon, 31 Jul 2000 13:36:55 -0700

67 lines

New Thread

Looking for a Mil Spec

Looking for a Mil Spec

Alan Kreplick <[log in to unmask]>

Wed, 5 Jul 2000 15:30:55 -0400

37 lines

Re: Looking for a Mil Spec

Kuczynski Michael <[log in to unmask]>

Wed, 5 Jul 2000 15:22:59 -0400

34 lines

Re: Looking for a Mil Spec

Cal Driscoll <[log in to unmask]>

Wed, 5 Jul 2000 15:53:13 -0400

71 lines

Re: Looking for a Mil Spec

Jason Larson, AScT <[log in to unmask]>

Wed, 5 Jul 2000 13:05:27 -0700

67 lines

New Thread

Looking for suppliers of insoluble lead anodes

Looking for suppliers of insoluble lead anodes

Nguyen Nguyen <[log in to unmask]>

Thu, 27 Jul 2000 08:49:28 -0700

72 lines

New Thread

Mail Undeliverable: Failure Detected

Mail Undeliverable: Failure Detected

Jack Crawford <[log in to unmask]>

Sun, 16 Jul 2000 15:58:57 -0500

49 lines

New Thread

Manufacturing Floor Temperature...

Manufacturing Floor Temperature...

Stephen R. Gregory <[log in to unmask]>

Mon, 10 Jul 2000 13:27:47 EDT

33 lines

Re: Manufacturing Floor Temperature...

Lee Whiteman <[log in to unmask]>

Mon, 10 Jul 2000 15:45:38 -0400

100 lines

Re: Manufacturing Floor Temperature...

Smith, Gary <[log in to unmask]>

Mon, 10 Jul 2000 13:36:42 -0400

72 lines

Re: Manufacturing Floor Temperature...

Phil Crepeau <[log in to unmask]>

Mon, 10 Jul 2000 13:04:58 -0700

99 lines

Re: Manufacturing Floor Temperature...

Cal Driscoll <[log in to unmask]>

Mon, 10 Jul 2000 16:28:51 -0400

91 lines

Re: Manufacturing Floor Temperature...

Ryan Grant <[log in to unmask]>

Mon, 10 Jul 2000 14:34:59 -0600

76 lines

Re: Manufacturing Floor Temperature...

Mike Fenner <[log in to unmask]>

Tue, 11 Jul 2000 13:24:09 +0100

71 lines

New Thread

Micro BGA rework...

Micro BGA rework...

Stephen R. Gregory <[log in to unmask]>

Tue, 11 Jul 2000 17:47:31 EDT

44 lines

Re: Micro BGA rework...

Ed Popielarski <[log in to unmask]>

Tue, 11 Jul 2000 21:18:47 -0700

102 lines

Re: Micro BGA rework...

mike connolly <[log in to unmask]>

Wed, 12 Jul 2000 07:17:22 -0700

98 lines

Re: Micro BGA rework...

Ryan Grant <[log in to unmask]>

Thu, 13 Jul 2000 11:24:00 -0600

86 lines

New Thread

MIL Standards

MIL Standards

Barry Gallegos <[log in to unmask]>

Wed, 26 Jul 2000 10:19:46 -0600

203 lines

Re: MIL Standards

Stephen R. Gregory <[log in to unmask]>

Wed, 26 Jul 2000 14:03:25 EDT

55 lines

Re: MIL Standards

Roberts Jon <[log in to unmask]>

Wed, 26 Jul 2000 13:21:25 -0500

223 lines

New Thread

Missing Fiducials

Missing Fiducials

Lefebvre, Scott <[log in to unmask]>

Tue, 11 Jul 2000 13:39:37 -0500

41 lines

Re: Missing Fiducials

Harold Papazian <[log in to unmask]>

Tue, 11 Jul 2000 14:13:11 -0500

83 lines

Re: Missing Fiducials

Mark Simmons <[log in to unmask]>

Wed, 12 Jul 2000 09:12:43 -0700

58 lines

Re: Missing Fiducials

Timothy Reeves <[log in to unmask]>

Wed, 12 Jul 2000 10:08:02 -0700

63 lines

Re: Missing Fiducials

Brock Hunter <[log in to unmask]>

Thu, 13 Jul 2000 08:18:29 -0400

89 lines

Re: Missing Fiducials

Olson, Jack <[log in to unmask]>

Thu, 13 Jul 2000 10:50:44 -0500

85 lines

New Thread

moisture sensitive components

moisture sensitive components

[log in to unmask]

Thu, 6 Jul 2000 10:59:13 -0600

42 lines

Re: moisture sensitive components

Jack Crawford <[log in to unmask]>

Thu, 6 Jul 2000 11:57:42 -0500

96 lines

New Thread

more Spam on spam?

Re: more Spam on spam?

Timothy Reeves <[log in to unmask]>

Mon, 10 Jul 2000 14:15:13 -0700

124 lines

Re: more Spam on spam?

David Fish <[log in to unmask]>

Mon, 10 Jul 2000 21:40:30 -0700

140 lines

New Thread

Mounting on 0.5mm PCB's

Mounting on 0.5mm PCB's

Dave Simmons <[log in to unmask]>

Tue, 4 Jul 2000 08:33:53 +1200

40 lines

Mounting on 0.5mm PCB's

Dave Simmons <[log in to unmask]>

Thu, 6 Jul 2000 09:11:16 +1200

46 lines

Re: Mounting on 0.5mm PCB's

Stephen R. Gregory <[log in to unmask]>

Wed, 5 Jul 2000 18:06:44 EDT

67 lines

New Thread

Mounting- Vertical - Radial Leaded

Mounting- Vertical - Radial Leaded

Bev Christian <[log in to unmask]>

Fri, 21 Jul 2000 08:51:46 -0400

39 lines

Re: Mounting- Vertical - Radial Leaded

Smith, Gary <[log in to unmask]>

Fri, 21 Jul 2000 09:03:15 -0400

32 lines

Re: Mounting- Vertical - Radial Leaded

Horaud, Walter <[log in to unmask]>

Fri, 21 Jul 2000 15:18:35 +0200

67 lines

Re: Mounting- Vertical - Radial Leaded

Eric Kalgren <[log in to unmask]>

Fri, 21 Jul 2000 08:34:25 -0600

77 lines

Re: Mounting- Vertical - Radial Leaded

Phil Crepeau <[log in to unmask]>

Fri, 21 Jul 2000 08:01:53 -0700

60 lines

Re: Mounting- Vertical - Radial Leaded

McMonagle, Mike <[log in to unmask]>

Fri, 21 Jul 2000 11:41:53 -0400

93 lines

Re: Mounting- Vertical - Radial Leaded

Roberts Jon <[log in to unmask]>

Fri, 21 Jul 2000 12:21:25 -0500

70 lines

Re: Mounting- Vertical - Radial Leaded

Hamilton, Richard CLE 4454 <[log in to unmask]>

Fri, 21 Jul 2000 10:37:51 -0700

95 lines

Re: Mounting- Vertical - Radial Leaded

Brent Stayer <[log in to unmask]>

Fri, 21 Jul 2000 14:15:00 -0400

164 lines

New Thread

Mounting- Vertical - Radial Leaded oh no!

Re: Mounting- Vertical - Radial Leaded oh no!

Phil Crepeau <[log in to unmask]>

Fri, 21 Jul 2000 08:24:43 -0700

61 lines

New Thread

New Magazine

New Magazine

Roland Jaquet <[log in to unmask]>

Mon, 3 Jul 2000 12:17:25 +0200

101 lines

New Thread

No flow underfill

No flow underfill

David <[log in to unmask]>

Wed, 26 Jul 2000 07:41:24 +0800

56 lines

No flow underfill

Creswick <[log in to unmask]>

Tue, 25 Jul 2000 22:46:51 -0500

65 lines

New Thread

Odd-Form Placement

Odd-Form Placement

McMonagle, Mike <[log in to unmask]>

Tue, 11 Jul 2000 11:59:39 -0400

48 lines

New Thread

Online Solder Training

Online Solder Training

Mike Lang <[log in to unmask]>

Tue, 11 Jul 2000 16:40:01 -0400

79 lines

Re: Online Solder Training

Smith, Gary <[log in to unmask]>

Wed, 12 Jul 2000 07:13:02 -0400

79 lines

Re: Online Solder Training

Dieselberg, Ron <[log in to unmask]>

Wed, 12 Jul 2000 09:13:56 -0400

114 lines

New Thread

Outgassing -- not a space application

Outgassing -- not a space application

Sue Hedrick <[log in to unmask]>

Tue, 25 Jul 2000 17:51:19 -0400

125 lines

Re: Outgassing -- not a space application

Mike Fenner <[log in to unmask]>

Sat, 29 Jul 2000 16:41:50 +0100

98 lines

New Thread

Pad design guidelines for CCGA

Pad design guidelines for CCGA

liuchangkang <[log in to unmask]>

Fri, 28 Jul 2000 13:32:39 +0800

33 lines

New Thread

PADS ASCII Design file reader?

PADS ASCII Design file reader?

Rick Thompson <[log in to unmask]>

Tue, 25 Jul 2000 10:27:20 -0700

41 lines

Re: PADS ASCII Design file reader?

McGlaughlin, Jeffrey A <[log in to unmask]>

Tue, 25 Jul 2000 13:43:14 -0400

75 lines

Re: PADS ASCII Design file reader?

Anne Ledger <[log in to unmask]>

Tue, 25 Jul 2000 13:47:50 -0400

75 lines

Re: PADS ASCII Design file reader?

Peter Wong <[log in to unmask]>

Tue, 25 Jul 2000 11:07:35 -0700

110 lines

Re: PADS ASCII Design file reader?

Paul Peltier <[log in to unmask]>

Tue, 25 Jul 2000 14:19:40 -0400

68 lines

New Thread

Paging Ed Popielarski

Paging Ed Popielarski

Cara.Startek <[log in to unmask]>

Thu, 13 Jul 2000 11:13:54 -0400

29 lines

New Thread

Palladium query

Re: Palladium query

Ingemar Hernefjord (EMW) <[log in to unmask]>

Mon, 3 Jul 2000 08:51:16 +0200

117 lines

Re: Palladium query

Ken Fong <[log in to unmask]>

Wed, 5 Jul 2000 12:39:17 +0800

132 lines

New Thread

PC Board mounted device?

PC Board mounted device?

Andy Thibeault <[log in to unmask]>

Wed, 19 Jul 2000 09:42:13 -0400

33 lines

Re: PC Board mounted device?

Stephen R. Gregory <[log in to unmask]>

Wed, 19 Jul 2000 10:04:15 EDT

47 lines

Re: PC Board mounted device?

Keith Calhoun <[log in to unmask]>

Wed, 19 Jul 2000 10:33:28 -0400

56 lines

New Thread

Permanent Marker for ID # marking on PCB while being bui ld

Re: Permanent Marker for ID # marking on PCB while being bui ld

<Michael J Mallory> <[log in to unmask]>

Mon, 3 Jul 2000 14:01:53 -0600

90 lines

New Thread

Permanent Marker for ID # marking on PCB while being build

Permanent Marker for ID # marking on PCB while being build

Madhavi Dhawan <[log in to unmask]>

Mon, 3 Jul 2000 14:03:44 CDT

56 lines

New Thread

Personnel Protective Equipment (PPE)

Personnel Protective Equipment (PPE)

Alan Kreplick <[log in to unmask]>

Tue, 11 Jul 2000 11:52:18 -0400

41 lines

Re: Personnel Protective Equipment (PPE)

Eric Kalgren <[log in to unmask]>

Tue, 11 Jul 2000 10:40:14 -0600

85 lines

Re: Personnel Protective Equipment (PPE)

Phillips, Peter (NM05) <[log in to unmask]>

Tue, 11 Jul 2000 14:08:04 -0500

113 lines

Re: Personnel Protective Equipment (PPE)

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 12 Jul 2000 11:30:27 -0400

106 lines

New Thread

Philips CSM & Trimmer Cap

Re: Philips CSM & Trimmer Cap

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Tue, 18 Jul 2000 07:43:51 -0400

96 lines

New Thread

Photo Permissions (was RE: [TN] "Bubbly Soldermask...")

Photo Permissions (was RE: [TN] "Bubbly Soldermask...")

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Thu, 27 Jul 2000 16:06:45 +0100

142 lines

Re: Photo Permissions (was RE: [TN] "Bubbly Soldermask...")

Goldman, Patricia J. <[log in to unmask]>

Thu, 27 Jul 2000 13:41:28 -0400

178 lines

New Thread

Plane Capacitors

Plane Capacitors

Brooks Bill <[log in to unmask]>

Thu, 13 Jul 2000 08:37:41 -0700

91 lines

Re: Plane Capacitors

Mcmaster, Michael <[log in to unmask]>

Wed, 26 Jul 2000 07:53:41 -0700

140 lines

Re: Plane Capacitors

Paul Fly <[log in to unmask]>

Wed, 26 Jul 2000 12:21:38 -0400

225 lines

Re: Plane Capacitors

Brooks Bill <[log in to unmask]>

Thu, 27 Jul 2000 10:31:04 -0700

255 lines

New Thread

Plating to Aluminum Core Board

Plating to Aluminum Core Board

Patterson, Dawn D. <[log in to unmask]>

Mon, 24 Jul 2000 11:28:10 -0700

38 lines

Re: Plating to Aluminum Core Board

Dennis Fritz <[log in to unmask]>

Tue, 25 Jul 2000 13:50:13 EDT

41 lines

New Thread

PLCC Coplanarity... (or lack of)

PLCC Coplanarity... (or lack of)

Mike Lang <[log in to unmask]>

Wed, 26 Jul 2000 14:42:39 -0400

64 lines

Re: PLCC Coplanarity... (or lack of)

Smith, Gary <[log in to unmask]>

Wed, 26 Jul 2000 14:57:22 -0400

55 lines

Re: PLCC Coplanarity... (or lack of)

Smith, Gary <[log in to unmask]>

Wed, 26 Jul 2000 14:57:50 -0400

50 lines

Re: PLCC Coplanarity... (or lack of)

Mike Lang <[log in to unmask]>

Wed, 26 Jul 2000 15:37:34 -0400

203 lines

Re: PLCC Coplanarity... (or lack of)

Cyker, Howard A (Howie) <[log in to unmask]>

Wed, 26 Jul 2000 16:07:36 -0400

63 lines

Re: PLCC Coplanarity... (or lack of)

Ryan Grant <[log in to unmask]>

Wed, 26 Jul 2000 14:50:07 -0600

54 lines

Re: PLCC Coplanarity... (or lack of)

Thorup, John <[log in to unmask]>

Wed, 26 Jul 2000 13:57:17 -0700

93 lines

Re: PLCC Coplanarity... (or lack of)

joyce <[log in to unmask]>

Wed, 26 Jul 2000 18:58:47 -0400

131 lines

Re: PLCC Coplanarity... (or lack of)

Stephen R. Gregory <[log in to unmask]>

Wed, 26 Jul 2000 20:32:06 EDT

87 lines

Re: PLCC Coplanarity... (or lack of)

Smith, Gary <[log in to unmask]>

Thu, 27 Jul 2000 06:54:52 -0400

129 lines

Re: PLCC Coplanarity... (or lack of)

Mike Fenner <[log in to unmask]>

Sat, 29 Jul 2000 11:44:01 +0100

57 lines

New Thread

Plugging Vias With Conductive Epoxy

Plugging Vias With Conductive Epoxy

Hans Rohr <[log in to unmask]>

Tue, 25 Jul 2000 21:10:27 -0400

34 lines

Re: Plugging Vias With Conductive Epoxy

Misner, Bruce <[log in to unmask]>

Wed, 26 Jul 2000 08:35:27 -0500

78 lines

Re: Plugging Vias With Conductive Epoxy

Louis, Edwin @ CSE <[log in to unmask]>

Thu, 27 Jul 2000 07:58:36 -0400

107 lines

Re: Plugging Vias With Conductive Epoxy

Keith Calhoun <[log in to unmask]>

Thu, 27 Jul 2000 10:22:51 -0400

130 lines

Re: Plugging Vias With Conductive Epoxy

mike connolly <[log in to unmask]>

Fri, 28 Jul 2000 19:04:09 -0700

77 lines

Re: Plugging Vias With Conductive Epoxy

Mike Fenner <[log in to unmask]>

Sat, 29 Jul 2000 11:04:05 +0100

74 lines

New Thread

Point of Use Stocking

Point of Use Stocking

Petrosky, Dennis J <[log in to unmask]>

Fri, 28 Jul 2000 14:33:00 -0400

35 lines

Re: Point of Use Stocking

David Fish <[log in to unmask]>

Sat, 29 Jul 2000 05:09:07 -0700

87 lines

New Thread

Pre-tinning...

Pre-tinning...

Stephen R. Gregory <[log in to unmask]>

Mon, 31 Jul 2000 16:20:10 EDT

58 lines

Re: Pre-tinning...

Gary Camac <[log in to unmask]>

Mon, 31 Jul 2000 16:11:41 -0500

79 lines

Re: Pre-tinning...

joyce <[log in to unmask]>

Mon, 31 Jul 2000 18:57:35 -0400

88 lines

Re: Pre-tinning...

Paul Klasek <[log in to unmask]>

Tue, 1 Aug 2000 08:57:27 +1000

121 lines

Re: Pre-tinning...

Stephen R. Gregory <[log in to unmask]>

Mon, 31 Jul 2000 19:15:52 EDT

63 lines

New Thread

Quality Control

Quality Control

Mirka Halas <[log in to unmask]>

Mon, 17 Jul 2000 16:16:31 -0400

53 lines

Re: Quality Control

Franklin D Asbell <[log in to unmask]>

Mon, 17 Jul 2000 16:04:14 -0500

93 lines

Re: Quality Control

[log in to unmask]

Mon, 17 Jul 2000 16:57:20 EDT

38 lines

Re: Quality Control

Darrel Therriault <[log in to unmask]>

Mon, 17 Jul 2000 14:11:48 -0700

126 lines

Re: Quality Control

Bogdan Gabi <[log in to unmask]>

Tue, 18 Jul 2000 09:39:07 +0300

330 lines

Re: Quality Control

Howieson, Rick <[log in to unmask]>

Tue, 18 Jul 2000 08:00:51 -0600

370 lines

New Thread

Quality Practices

Quality Practices

Stephen Ayotte <[log in to unmask]>

Tue, 18 Jul 2000 11:26:41 -0400

34 lines

New Thread

Quality Software

Quality Software

Rich Lasko <[log in to unmask]>

Wed, 19 Jul 2000 07:05:23 -0500

48 lines

Re: Quality Software

Reeves Wendy <[log in to unmask]>

Wed, 19 Jul 2000 07:40:10 -0500

97 lines

Re: Quality Software

Brent Stayer <[log in to unmask]>

Wed, 19 Jul 2000 11:57:10 -0400

114 lines

New Thread

Quality System Support

Quality System Support

Rich Lasko <[log in to unmask]>

Thu, 13 Jul 2000 08:30:47 -0500

46 lines

Re: Quality System Support

Franklin D Asbell <[log in to unmask]>

Thu, 13 Jul 2000 09:30:40 -0500

101 lines

Re: Quality System Support

Noble, Ed <[log in to unmask]>

Thu, 13 Jul 2000 10:58:27 -0400

91 lines

Re: Quality System Support

Mike Sewell <[log in to unmask]>

Thu, 13 Jul 2000 11:27:56 EDT

44 lines

Re: Quality System Support

Alain Savard <[log in to unmask]>

Thu, 13 Jul 2000 11:48:34 -0400

70 lines

New Thread

Question on D.I. system fouling

Question on D.I. system fouling

Wallisch, Ernst <[log in to unmask]>

Thu, 13 Jul 2000 11:06:00 -0400

56 lines

Re: Question on D.I. system fouling

Alain Savard <[log in to unmask]>

Thu, 13 Jul 2000 11:39:39 -0400

89 lines

Re: Question on D.I. system fouling

Bob Hawkins <[log in to unmask]>

Thu, 13 Jul 2000 12:55:33 -0500

84 lines

Re: Question on D.I. system fouling

Brian Ellis <[log in to unmask]>

Fri, 14 Jul 2000 12:27:16 +0300

94 lines

New Thread

Question on Short Run Processes

Question on Short Run Processes

Barry Gallegos <[log in to unmask]>

Wed, 26 Jul 2000 10:05:55 -0600

272 lines

Re: Question on Short Run Processes

Ed Valentine <[log in to unmask]>

Wed, 26 Jul 2000 13:15:31 -0400

342 lines

New Thread

Questions for assemblers:

Questions for assemblers:

Speer, Ewart <[log in to unmask]>

Tue, 25 Jul 2000 14:04:55 -0400

194 lines

New Thread

RE Odd-form insertion machines

RE Odd-form insertion machines

Stephen Thornton <[log in to unmask]>

Mon, 17 Jul 2000 09:48:16 +0930

172 lines

New Thread

Recommendations on IR Fusing Equipment

Recommendations on IR Fusing Equipment

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Mon, 31 Jul 2000 13:54:32 -0400

47 lines

New Thread

Reducing package to 0402

Reducing package to 0402

Dominic Gagnier <[log in to unmask]>

Thu, 6 Jul 2000 16:11:08 -0400

45 lines

Re: Reducing package to 0402

Harold Papazian <[log in to unmask]>

Thu, 6 Jul 2000 16:54:07 -0500

85 lines

Re: Reducing package to 0402

Dominic Gagnier <[log in to unmask]>

Fri, 7 Jul 2000 08:51:55 -0400

109 lines

Re: Reducing package to 0402

Tenison Stone <[log in to unmask]>

Fri, 7 Jul 2000 09:41:06 -0500

157 lines

Re: Reducing package to 0402

Steven Lustig <[log in to unmask]>

Fri, 7 Jul 2000 11:22:46 -0400

210 lines

New Thread

Reflow Issue

Reflow Issue

Thomas Han <[log in to unmask]>

Tue, 18 Jul 2000 09:17:14 -0700

36 lines

Re: Reflow Issue

Tempea, Ioan <[log in to unmask]>

Tue, 18 Jul 2000 12:31:48 -0400

76 lines

Re: Reflow Issue

Wenger, George M (George) <[log in to unmask]>

Tue, 18 Jul 2000 13:35:12 -0400

73 lines

Re: Reflow Issue

Werner Engelmaier <[log in to unmask]>

Tue, 18 Jul 2000 13:41:34 EDT

38 lines

Re: Reflow Issue

Brad L. Matthies <[log in to unmask]>

Tue, 18 Jul 2000 13:58:13 -0500

69 lines

Re: Reflow Issue

Valladares, Hector A (FL51) <[log in to unmask]>

Wed, 19 Jul 2000 13:06:29 -0400

73 lines

New Thread

Reflow Oven

Reflow Oven

Michael Thwaite <[log in to unmask]>

Tue, 1 Aug 2000 10:24:27 +1000

43 lines

Re: Reflow Oven

Stephen R. Gregory <[log in to unmask]>

Mon, 31 Jul 2000 21:03:48 EDT

65 lines

Re: Reflow Oven

Paul Klasek <[log in to unmask]>

Tue, 1 Aug 2000 12:28:34 +1000

128 lines

New Thread

Reflow Oven Causing Bridging???

Re: Reflow Oven Causing Bridging???

Larry Jindra <[log in to unmask]>

Thu, 6 Jul 2000 14:46:10 -0700

74 lines

New Thread

Reliability Contract Help

Reliability Contract Help

David Hipp <[log in to unmask]>

Fri, 14 Jul 2000 15:42:18 -0500

39 lines

New Thread

Reliability Testing

Reliability Testing

Stephen Ayotte <[log in to unmask]>

Tue, 18 Jul 2000 11:31:51 -0400

43 lines

Re: Reliability Testing

Misner, Bruce <[log in to unmask]>

Tue, 18 Jul 2000 10:54:58 -0500

76 lines

Re: Reliability Testing

Werner Engelmaier <[log in to unmask]>

Tue, 18 Jul 2000 13:41:37 EDT

37 lines

New Thread

Removal of mastic (tape residue)

Removal of mastic (tape residue)

Dieselberg, Ron <[log in to unmask]>

Wed, 19 Jul 2000 06:24:18 -0400

34 lines

New Thread

Repeted: [TN] EOS-models for bi/unipolar semis

Repeted: [TN] EOS-models for bi/unipolar semis

Ingemar Hernefjord (EMW) <[log in to unmask]>

Wed, 5 Jul 2000 09:47:49 +0200

29 lines

New Thread

Request for Adhesive Information or Assistance

Re: Request for Adhesive Information or Assistance

Smith, Gary <[log in to unmask]>

Wed, 5 Jul 2000 07:08:27 -0400

87 lines

New Thread

ReRadialLeadedSpacer

ReRadialLeadedSpacer

James H Moffitt <[log in to unmask]>

Fri, 21 Jul 2000 21:37:59 EDT

55 lines

New Thread

Responses to Spam

Responses to Spam

Kasprzak, Bill (esd) USX <[log in to unmask]>

Mon, 10 Jul 2000 07:59:19 -0400

46 lines

New Thread

Say Good-bye-No Technical Content

Say Good-bye-No Technical Content

Anne Ledger <[log in to unmask]>

Fri, 28 Jul 2000 17:36:10 -0400

45 lines

Re: Say Good-bye-No Technical Content

Charles E. McMahon <[log in to unmask]>

Fri, 28 Jul 2000 18:02:39 -0400

77 lines

Re: Say Good-bye-No Technical Content

Mark Mazzoli <[log in to unmask]>

Fri, 28 Jul 2000 15:15:35 -0700

82 lines

Re: Say Good-bye-No Technical Content

Marc Bituagan <[log in to unmask]>

Sat, 29 Jul 2000 22:16:32 +0800

30 lines

New Thread

search for standard

search for standard

Corbel, Gwenna <[log in to unmask]>

Mon, 31 Jul 2000 13:39:12 +0200

27 lines

search for standard

Corbel, Gwenna <[log in to unmask]>

Mon, 31 Jul 2000 13:41:17 +0200

31 lines

New Thread

SEARCH warpage bow twist IN TechNet

SEARCH warpage bow twist IN TechNet

Brian Gaynor <[log in to unmask]>

Fri, 21 Jul 2000 08:37:08 +0100

21 lines

Re: SEARCH warpage bow twist IN TechNet

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 21 Jul 2000 07:27:00 -0400

68 lines

New Thread

Serialization of boards

Serialization of boards

Russ Bafford <[log in to unmask]>

Fri, 14 Jul 2000 10:15:24 -0400

33 lines

Re: Serialization of boards

Franklin D Asbell <[log in to unmask]>

Fri, 14 Jul 2000 10:25:55 -0500

65 lines

Re: Serialization of boards

Alain Savard <[log in to unmask]>

Fri, 14 Jul 2000 11:13:59 -0400

45 lines

Re: Serialization of boards

Phil Nutting <[log in to unmask]>

Fri, 14 Jul 2000 11:37:05 -0400

84 lines

Re: Serialization of boards

Rick Thompson <[log in to unmask]>

Fri, 14 Jul 2000 11:08:00 -0700

75 lines

Re: Serialization of boards

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Fri, 14 Jul 2000 20:56:45 +0100

63 lines

Re: Serialization of boards

mike connolly <[log in to unmask]>

Fri, 14 Jul 2000 15:44:18 -0700

76 lines

New Thread

sighoff technet

sighoff technet

Russell Gann <[log in to unmask]>

Mon, 10 Jul 2000 11:06:52 -0700

25 lines

New Thread

Sign Off

Sign Off

김달영 차장 전자 본사수출팀 <[log in to unmask]>

Thu, 27 Jul 2000 06:40:39 +0900

26 lines

New Thread

SIGN OFF Technet

SIGN OFF Technet

Ted Tessier <[log in to unmask]>

Wed, 12 Jul 2000 00:40:18 -0700

25 lines

New Thread

Silver migration articles

Re: Silver migration articles

James-Kester <[log in to unmask]>

Thu, 13 Jul 2000 10:09:29 +0800

73 lines

New Thread

small qty wire drawing facility

small qty wire drawing facility

joyce <[log in to unmask]>

Thu, 13 Jul 2000 19:12:37 -0400

43 lines

Re: small qty wire drawing facility

Kelly M. Schriver <[log in to unmask]>

Fri, 14 Jul 2000 06:49:19 -0500

80 lines

New Thread

smd solder fillet

smd solder fillet

Ken Fong <[log in to unmask]>

Mon, 3 Jul 2000 10:40:58 +0800

34 lines

New Thread

Smt Connector Defects

Smt Connector Defects

Barry Gallegos <[log in to unmask]>

Tue, 11 Jul 2000 10:29:55 -0600

215 lines

Re: Smt Connector Defects

McMonagle, Mike <[log in to unmask]>

Tue, 11 Jul 2000 13:17:01 -0400

78 lines

New Thread

SMT Line & ESD

SMT Line & ESD

Noble, Ed <[log in to unmask]>

Tue, 18 Jul 2000 07:32:56 -0400

41 lines

Re: SMT Line & ESD

Cash, Alan <[log in to unmask]>

Tue, 18 Jul 2000 06:25:28 -0700

74 lines

New Thread

SMT low cost soldering machine for prototyping and repairs.

SMT low cost soldering machine for prototyping and repairs.

Gaetan Fournier <[log in to unmask]>

Tue, 4 Jul 2000 16:10:08 -0400

35 lines

Re: SMT low cost soldering machine for prototyping and repairs.

Jeff Ferry <[log in to unmask]>

Wed, 5 Jul 2000 10:20:52 -0500

70 lines

New Thread

SNEC Meeting

SNEC Meeting

Gary Ferrari <[log in to unmask]>

Fri, 28 Jul 2000 15:57:32 EDT

87 lines

New Thread

Solder creep characteristics

Solder creep characteristics

Marc Fortin <[log in to unmask]>

Tue, 11 Jul 2000 10:00:40 -0400

34 lines

New Thread

solder mask

solder mask

Phil Nutting <[log in to unmask]>

Thu, 13 Jul 2000 11:30:40 -0400

39 lines

Re: solder mask

Brian Ellis <[log in to unmask]>

Fri, 14 Jul 2000 12:02:55 +0300

79 lines

New Thread

Solder Mask & ENIG

Re: Solder Mask & ENIG

Jan Thuesen <[log in to unmask]>

Mon, 3 Jul 2000 09:11:26 +0200

109 lines

New Thread

Solder mask clearance

Solder mask clearance

Jorge A Rodriguez <[log in to unmask]>

Wed, 19 Jul 2000 14:06:51 -0600

40 lines

Re: Solder mask clearance

Guy Ramsey <[log in to unmask]>

Wed, 19 Jul 2000 17:03:23 -0400

70 lines

Re: Solder mask clearance

Brooks Bill <[log in to unmask]>

Wed, 19 Jul 2000 14:31:55 -0700

74 lines

New Thread

solder mask crack

solder mask crack

Tong Long Zhang <[log in to unmask]>

Mon, 3 Jul 2000 10:50:17 +0800

31 lines

New Thread

Something that might be useful to everybody...

Something that might be useful to everybody...

Stephen R. Gregory <[log in to unmask]>

Mon, 17 Jul 2000 12:13:07 EDT

66 lines

New Thread

Space Electronics...

Space Electronics...

Stephen R. Gregory <[log in to unmask]>

Wed, 19 Jul 2000 10:20:30 EDT

47 lines

Re: Space Electronics...

Smith, Gary <[log in to unmask]>

Wed, 19 Jul 2000 10:33:29 -0400

84 lines

Re: Space Electronics...

Hinners Hans Civ WRALC/LYPME <[log in to unmask]>

Wed, 19 Jul 2000 15:47:47 +0100

85 lines

Re: Space Electronics...

[log in to unmask]

Wed, 19 Jul 2000 10:58:58 EDT

38 lines

Re: Space Electronics...

Phil Crepeau <[log in to unmask]>

Wed, 19 Jul 2000 08:12:31 -0700

75 lines

Re: Space Electronics...

Phil Crepeau <[log in to unmask]>

Wed, 19 Jul 2000 08:19:52 -0700

67 lines

Re: Space Electronics...

Hamilton, Richard CLE 4454 <[log in to unmask]>

Wed, 19 Jul 2000 08:28:04 -0700

98 lines

Re: Space Electronics...

Eric Kalgren <[log in to unmask]>

Wed, 19 Jul 2000 09:34:31 -0600

124 lines

Re: Space Electronics...

Lee Whiteman <[log in to unmask]>

Wed, 19 Jul 2000 11:45:25 -0400

125 lines

Re: Space Electronics...

Ken Bloomquist <[log in to unmask]>

Wed, 19 Jul 2000 08:49:22 -0700

47 lines

Re: Space Electronics...

Roberts Jon <[log in to unmask]>

Wed, 19 Jul 2000 12:04:40 -0500

81 lines

Re: Space Electronics...

Stuart Korringa <[log in to unmask]>

Wed, 19 Jul 2000 14:03:57 -0400

45 lines

Re: Space Electronics...

Phil Crepeau <[log in to unmask]>

Wed, 19 Jul 2000 13:07:36 -0700

68 lines

Space Electronics...

Creswick <[log in to unmask]>

Wed, 19 Jul 2000 23:54:17 -0500

48 lines

Re: Space Electronics...

joyce <[log in to unmask]>

Thu, 20 Jul 2000 06:02:10 -0400

79 lines

Re: Space Electronics...

Kasprzak, Bill (esd) USX <[log in to unmask]>

Fri, 21 Jul 2000 07:42:10 -0400

123 lines

New Thread

SPAM

SPAM

John Brewer <[log in to unmask]>

Mon, 10 Jul 2000 08:47:20 -0400

40 lines

New Thread

Spam from Dovebid

Spam from Dovebid

Matthew Lamkin <[log in to unmask]>

Tue, 11 Jul 2000 08:31:49 +0100

30 lines

Re: Spam from Dovebid

Franklin D Asbell <[log in to unmask]>

Tue, 11 Jul 2000 07:50:34 -0500

57 lines

Re: Spam from Dovebid

Jean-Francois Bissonnette <[log in to unmask]>

Tue, 11 Jul 2000 09:01:26 -0400

88 lines

Re: Spam from Dovebid

Alain Savard <[log in to unmask]>

Tue, 11 Jul 2000 09:18:40 -0400

66 lines

New Thread

Spam on spam?

Spam on spam?

Smith, Gary <[log in to unmask]>

Mon, 10 Jul 2000 11:00:47 -0400

107 lines

New Thread

SSteel sintered air mini muffler

SSteel sintered air mini muffler

Paul Klasek <[log in to unmask]>

Fri, 28 Jul 2000 10:34:45 +1000

98 lines

New Thread

Strange Cap Terminations

Strange Cap Terminations

McMonagle, Mike <[log in to unmask]>

Thu, 6 Jul 2000 13:49:12 -0400

42 lines

Re: Strange Cap Terminations

Dewey Whittaker <[log in to unmask]>

Thu, 6 Jul 2000 11:10:55 -0700

136 lines

Re: Strange Cap Terminations

Stephen R. Gregory <[log in to unmask]>

Thu, 6 Jul 2000 14:21:49 EDT

82 lines

Re: Strange Cap Terminations

Bev Christian <[log in to unmask]>

Thu, 6 Jul 2000 14:40:29 -0400

178 lines

Re: Strange Cap Terminations

John Maxwell <[log in to unmask]>

Thu, 6 Jul 2000 14:21:37 -0700

221 lines

New Thread

Subj: Mechanical Design Guidelines

Subj: Mechanical Design Guidelines

Hollandsworth, Ron <[log in to unmask]>

Fri, 7 Jul 2000 07:27:41 -0500

45 lines

Re: Subj: Mechanical Design Guidelines

Brooks Bill <[log in to unmask]>

Fri, 7 Jul 2000 08:53:48 -0700

72 lines

New Thread

Subj: White Tin

Subj: White Tin

Hollandsworth, Ron <[log in to unmask]>

Mon, 31 Jul 2000 16:13:51 -0500

55 lines

Re: Subj: White Tin

Darrel Therriault <[log in to unmask]>

Mon, 31 Jul 2000 14:46:10 -0700

83 lines

Re: Subj: White Tin

Brooks Bill <[log in to unmask]>

Mon, 31 Jul 2000 16:50:07 -0700

80 lines

Re: Subj: White Tin

Steve Underwood <[log in to unmask]>

Mon, 31 Jul 2000 21:54:46 -0400

102 lines

New Thread

Tear drop question for inner layer and outer layer

Tear drop question for inner layer and outer layer

Ken Patel <[log in to unmask]>

Fri, 7 Jul 2000 17:14:27 -0700

35 lines

Re: Tear drop question for inner layer and outer layer

Ian McMillan <[log in to unmask]>

Sat, 8 Jul 2000 11:23:20 -0700

66 lines

Re: Tear drop question for inner layer and outer layer

Glynn Shaw <[log in to unmask]>

Mon, 10 Jul 2000 08:28:58 -0700

78 lines

Re: Tear drop question for inner layer and outer layer

Dave Hoover <[log in to unmask]>

Mon, 10 Jul 2000 12:19:49 -0700

122 lines

Re: Tear drop question for inner layer and outer layer

Olson, Jack <[log in to unmask]>

Mon, 10 Jul 2000 15:35:34 -0500

51 lines

Re: Tear drop question for inner layer and outer layer

Dave Hoover <[log in to unmask]>

Wed, 12 Jul 2000 13:57:10 -0700

111 lines

New Thread

Technet delay

Technet delay

Keach Sasamori <[log in to unmask]>

Mon, 17 Jul 2000 22:38:30 -0500

40 lines

New Thread

TechNet Digest - 26 Jul 2000 (#2000-459)

Re: TechNet Digest - 26 Jul 2000 (#2000-459)

Julie Dixon <[log in to unmask]>

Thu, 27 Jul 2000 07:53:18 EDT

28 lines

New Thread

test

test

Mirka Halas <[log in to unmask]>

Mon, 17 Jul 2000 15:31:32 -0400

26 lines

New Thread

Tester

Tester

Jonathan A Noquil <[log in to unmask]>

Wed, 19 Jul 2000 17:35:24 +0800

31 lines

New Thread

Thermal stress/shock profile for loaded board

Thermal stress/shock profile for loaded board

Ken Patel <[log in to unmask]>

Wed, 19 Jul 2000 14:44:52 -0700

42 lines

New Thread

Tolerance on board thickness

Tolerance on board thickness

d. terstegge <[log in to unmask]>

Wed, 5 Jul 2000 17:55:39 +0200

43 lines

Re: Tolerance on board thickness

Bill Decray <[log in to unmask]>

Wed, 5 Jul 2000 12:16:50 -0400

83 lines

Re: Tolerance on board thickness

Phil Crepeau <[log in to unmask]>

Wed, 5 Jul 2000 09:17:44 -0700

66 lines

Re: Tolerance on board thickness

Howieson, Rick <[log in to unmask]>

Wed, 5 Jul 2000 10:22:12 -0600

70 lines

Re: Tolerance on board thickness

Alain Savard <[log in to unmask]>

Wed, 5 Jul 2000 12:23:29 -0400

87 lines

Re: Tolerance on board thickness

Brooks Bill <[log in to unmask]>

Wed, 5 Jul 2000 09:49:21 -0700

98 lines

Re: Tolerance on board thickness

Hiteshew, Michael <[log in to unmask]>

Wed, 5 Jul 2000 13:21:50 -0400

65 lines

Re: Tolerance on board thickness

Timothy Reeves <[log in to unmask]>

Wed, 5 Jul 2000 17:53:10 -0700

57 lines

Re: Tolerance on board thickness

michael <[log in to unmask]>

Thu, 6 Jul 2000 10:11:18 +0800

74 lines

Re: Tolerance on board thickness

d. terstegge <[log in to unmask]>

Thu, 6 Jul 2000 09:38:01 +0200

83 lines

Re: Tolerance on board thickness

Geoff Layhe <[log in to unmask]>

Fri, 7 Jul 2000 11:34:16 +0100

75 lines

New Thread

TR: search for standard

TR: search for standard

Horaud, Walter <[log in to unmask]>

Mon, 31 Jul 2000 13:51:54 +0200

51 lines

New Thread

Trudril 105

Trudril 105

Scott B. Westheimer <[log in to unmask]>

Mon, 24 Jul 2000 10:38:40 +0800

70 lines

New Thread

Universal OFS

Universal OFS

Ed Holton <[log in to unmask]>

Tue, 25 Jul 2000 07:55:14 -0400

32 lines

New Thread

Universal OFS system

Universal OFS system

Ed Holton <[log in to unmask]>

Fri, 7 Jul 2000 16:17:05 -0400

33 lines

New Thread

V-Score board separation

V-Score board separation

Ryan Jennens <[log in to unmask]>

Thu, 27 Jul 2000 13:25:24 -0400

35 lines

Re: V-Score board separation

Mark Simmons <[log in to unmask]>

Thu, 27 Jul 2000 11:42:18 -0700

63 lines

Re: V-Score board separation

Brent Stayer <[log in to unmask]>

Thu, 27 Jul 2000 15:05:18 -0400

102 lines

Re: V-Score board separation

Paul Klasek <[log in to unmask]>

Fri, 28 Jul 2000 07:59:53 +1000

78 lines

Re: V-Score board separation

Brent Stayer <[log in to unmask]>

Fri, 28 Jul 2000 14:33:11 -0400

192 lines

New Thread

Virus Warning: Jokes

Virus Warning: Jokes

Keach Sasamori <[log in to unmask]>

Fri, 7 Jul 2000 13:58:32 -0500

37 lines

New Thread

Was"Bubbly Soldermask",Now: How I took the pics..

Re: Was"Bubbly Soldermask",Now: How I took the pics..

Stephen R. Gregory <[log in to unmask]>

Wed, 26 Jul 2000 17:56:40 EDT

57 lines

New Thread

wave soldering caps?

wave soldering caps?

Graham Collins <[log in to unmask]>

Tue, 25 Jul 2000 07:25:57 -0400

45 lines

Re: wave soldering caps?

Ryan Grant <[log in to unmask]>

Tue, 25 Jul 2000 08:35:02 -0600

98 lines

New Thread

Wave soldering machine wanted

Wave soldering machine wanted

Joseph H. Smith <[log in to unmask]>

Thu, 27 Jul 2000 20:55:24 +0800

32 lines

Re: Wave soldering machine wanted

Ed Popielarski <[log in to unmask]>

Fri, 28 Jul 2000 08:14:08 -0700

86 lines

New Thread

Wave Soldering Types

Wave Soldering Types

Smith, Gary <[log in to unmask]>

Fri, 28 Jul 2000 08:52:07 -0400

31 lines

Re: Wave Soldering Types

Cal Driscoll <[log in to unmask]>

Fri, 28 Jul 2000 10:06:01 -0400

110 lines

Re: Wave Soldering Types

d. terstegge <[log in to unmask]>

Fri, 28 Jul 2000 16:09:51 +0200

63 lines

New Thread

Wave Solering SOT23

Wave Solering SOT23

Stephen Thornton <[log in to unmask]>

Mon, 31 Jul 2000 13:10:07 +0930

100 lines

Re: Wave Solering SOT23

Brian Ellis <[log in to unmask]>

Mon, 31 Jul 2000 09:11:01 +0300

52 lines

Re: Wave Solering SOT23

Luis Gallegos <[log in to unmask]>

Mon, 31 Jul 2000 07:52:07 -0500

61 lines

Re: Wave Solering SOT23

Brian Ellis <[log in to unmask]>

Mon, 31 Jul 2000 16:13:36 +0300

84 lines

Re: Wave Solering SOT23

Jon Moore <[log in to unmask]>

Mon, 31 Jul 2000 16:13:24 EDT

46 lines

New Thread

Wavesoldering and in-line water cleaner

Re: Wavesoldering and in-line water cleaner

Kasprzak, Bill (esd) USX <[log in to unmask]>

Thu, 13 Jul 2000 19:44:19 -0400

48 lines

Re: Wavesoldering and in-line water cleaner

Pat Kane <[log in to unmask]>

Thu, 13 Jul 2000 11:59:50 EDT

56 lines

Re: Wavesoldering and in-line water cleaner

Brian Ellis <[log in to unmask]>

Fri, 14 Jul 2000 12:58:31 +0300

105 lines

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003
December 2002
November 2002
October 2002
September 2002
August 2002
July 2002
June 2002
May 2002
April 2002
March 2002
February 2002
January 2002
December 2001
November 2001
October 2001
September 2001
August 2001
July 2001
June 2001
May 2001
April 2001
March 2001
February 2001
January 2001
December 2000
November 2000
October 2000
September 2000
August 2000
July 2000
June 2000
May 2000
April 2000
March 2000
February 2000
January 2000
December 1999
November 1999
October 1999
September 1999
August 1999
July 1999
June 1999
May 1999
April 1999
March 1999
February 1999
January 1999
December 1998
November 1998
October 1998
September 1998
August 1998
July 1998
June 1998
May 1998
April 1998
March 1998
February 1998
January 1998
December 1997
November 1997
October 1997
September 1997
August 1997
July 1997
June 1997
May 1997
April 1997
March 1997
February 1997
January 1997
1996
1995

ATOM RSS1 RSS2



LISTSERV.IPC.ORG

CataList Email List Search Powered by the LISTSERV Email List Manager