Dear Technetters ;

 I'd like to ask some information or idea that is useful for fixing thin
core to adjacent prepreg and thus
 it could ensure not to allow any misalignment after pressing in the mass
lamination process.
 Till now, we arrange some thin cores on the bottom 1020 x1220 mm prepreg
and then fix 4 corners
 of each thin core to the prepreg by using of white adhesive tape.
 We want to exchange this tape to other proper tools or adhesive because
remained tape cause
 breakage of lamination roll during dry film lamination process.
 Any comments or useful information would be greatly appreciated.
 Thanks for your attention.


Tal Young Kim
Manager, Quality Assurance Team
Doosan Corporation Electro-Materials BG
Tel : 82-445-820-8451
Fax : 82-445-820-8300
E-mail:[log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################