Dear Technetters ; I'd like to ask some information or idea that is useful for fixing thin core to adjacent prepreg and thus it could ensure not to allow any misalignment after pressing in the mass lamination process. Till now, we arrange some thin cores on the bottom 1020 x1220 mm prepreg and then fix 4 corners of each thin core to the prepreg by using of white adhesive tape. We want to exchange this tape to other proper tools or adhesive because remained tape cause breakage of lamination roll during dry film lamination process. Any comments or useful information would be greatly appreciated. Thanks for your attention. Tal Young Kim Manager, Quality Assurance Team Doosan Corporation Electro-Materials BG Tel : 82-445-820-8451 Fax : 82-445-820-8300 E-mail:[log in to unmask] ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or 847-509-9700 ext.5365 ##############################################################