Sender: |
|
X-To: |
|
Date: |
Thu, 19 Aug 1999 10:58:11 -0500 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Texas Instruments |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Scott,
I'm trying to etch off solder plated on copper. Is there any etch which will
etch both Copper and Solder?
Thanks for your input.
Yasmeen
[log in to unmask] wrote:
> Yasmeen,
>
> Are you trying to etch solder, or are you etching copper using the solder as
> an etch resist?
>
> If you are using solder as an etch resist, you can use ammoniacal etch.
> Which can be purchased from a variety of suppliers.
>
> If you are etching solder (or tin/lead plating) then you can either use a
> peroxide or a ferric nitrate based tin stripper. Both will work, and again,
> can be purchased from a variety of suppliers.
>
> If more help is needed feel free to ask.
>
> Scott Griggs
> Senior Applications Engineer
> RBP Chemical Corp.
> (612) 825-6113
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|