Geoff:

ZMP-V2 is a section in the UL recognized components directory either where printed
wiring boards or plastic laminates are listed.  (I'm not certain since I'm typing this
from home, but the heading for the two sections are similar.)  My interpretation of
your requirement is that the specification is looking for a UL recognized material.
Most commercial laminates have been evaluated by UL and the file numbers may be
obtained from the manufacturer.

From your web page, I notice that you are a distributor of ISOLA laminates.  Most if
not all of the laminates manufactured by ISOLA USA are UL recognized components.  (This
is also true of other laminate manufacturers.)

Don Vischulis
[log in to unmask]

Geoff Layhe wrote:

> Hi All,
>
> Can anybody help with a UL material reference?
> I have been asked to specify a copper clad laminate which is "a UL
> recognised material suitable for live parts to ZPM-V2". The laminate is
> for a circuit board in a control system.
> The only UL specs I've seen for laminates are UL 796 & UL 94 & these
> don't mention ZPM-V2.
>
> Anybody come across this reference before?.
>
> Geoff Layhe
> Lamar-UK Ltd
> www.lamar-uk.co.uk

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################