Hey Pat,

        I don't know Uralane but are you doing this in a Cleanroom
environment?
        If so what Class and flow type?

        Have you tried letting the boards cure in a cleanhood or something?

        Hans

Air Force Material Command - We keep them flying!
~~~~~~~~
Hans M. Hinners                                 WR-ALC/LYPME Bldg. 640
Materials Engineer                                      380 Second Street,
Suite 104
Manufacturing Eng. Sec.                         Robins AFB GA 31098-1638
912-926-1970 (Voice) 468 - 1970 (DSN)   912-926-7974 (Fax)
[log in to unmask]


> I need help with a problem I have been fighting for 6 months.  We
> currently use Uralane 5750 on hi-rel PWA's used in space applications.
> Our method of applying is the brush method per NHB5300.4(3J) April 85.
>
> The quality requirements state that "Coating shall be free from
> contamination or foreign material.  Any contaminant visible under 4- to
> 10- power magnification shall be cause for rejection."
>
> My problem seems to be the properties of Uralane 5750.  It seems to remain
> tacky after it is cured and this appears to attract all airborne
> particles.   Our CSI and GSI inspectors naturally crank up the scopes to
> 10 power.   I used Humiseal 1B31 in the same environment and do not have
> the same problems.
>
> My main customers Boeing and TRW have both issued CAR's against this
> process as it realates to contamination.  I am in need of any input that
> may help me improve my process.  I am a NASA certified Instructor in
> Conformal Coating and Staking and have not been able to solve this
> problem.
>
> Any information that would aid me in continuing my career would be greatly
> appreciated.
>
> Pat Lujan
> Senior Mfg. Eng.
> BFGoodrich Data Systems Div.
> Albuquerque New Mexico   USA
> 505.938.5373
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################