John,

I do not have a list of part numbers readily available. However, I was just
asked again
( about 2:30 PM today) to buy off an out of tolerance issue on an array part
in inspection. Tom B has the part info. It also was an overall array
dimension. If you wish I will have Tom call you on the next few issues so
you can get involved immediate.

By the way, I appreciate you quick responses this week. Thank you.

Ed C.

-----Original Message-----
From: John Haman Jr. <[log in to unmask]>
To: Ed Cosper <[log in to unmask]>
Date: Friday, July 30, 1999 12:08 PM
Subject: Re: 4A02627D


>Ed,
>
>Can I get a list of the parts and the measurements out.  The board below is
>out 0.206"  this is not a machine error.
>
>John Haman Jr.
>
>----------
>From: Ed Cosper <[log in to unmask]>
>To: Phil Castle <[log in to unmask]>; John Haman
><[log in to unmask]>
>Cc: Ed Fisher <[log in to unmask]>
>Subject: Fw: 4A02627D
>Date: Friday, July 30, 1999 10:04 AM
>
>Phil, John
>
>I have yet another rejection for rout tolerances in the field ( See below).
>I think we need to determine what is going on with our routers and/ or
>personnel. If the field rejections keep up I  may have to start sorting
>100% at final and scrapping the parts.  I really dont want to get in this
>mode. However, it appears by the number of buy offs Ive been doing lately (
>at least 3 this week including one this morning ) the out of tolerance
>problem is becoming the norm  rather than the exception especially on +/-
>005 tolerances.
>
>Let me know if you have any ideas with regard to what we can do.
>
>Ed C
>
>
>----------
>> From: Jane Biggs <[log in to unmask]>
>> To: JOHN WOODBURN (E-mail) <[log in to unmask]>
>> Subject: 4A02627D
>> Date: Tuesday, July 27, 1999 1:29 PM
>>
>> WOODY THIS BRD WAS REJECTED FOR BRD OUT OF TOL THE WIDTH SHOULD BE 14.212
>
>> +/-.005 IS 14.418 PLS ADVISE IF YOU WILL REPLACE OR RMA TO RETURN THANKS
>BIGGS
>>
>> JANE BIGGS
>> U.S.ASSEMBLIES ENDICOTT
>> PHONE-607-786-6300
>> FAX-607-786-6313
>>
>
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################