TECHNET Archives

June 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Richard Haynes <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 11 Jun 1999 16:47:19 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (50 lines)
Hi,
Typical 100-200 uin depending on the surface roughness of CuBe. The smoother
the low the Ni. Au should be porious in not the Ni must be smooth.
Richard Haynes
609-497-4584



-----Original Message-----
From: Henry Kruckeberg <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Thursday, June 10, 1999 12:42 PM
Subject: [TN] Ni. Plating


>Does anyone have any info on the optimum Ni. thickness to prevent base
metal
>migration in a electro deposited AU. over Ni.  on beryllium copper
application.
>
>Any input appreciated
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2