Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 10 May 1999 18:33:15 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dear all
we grow bit too fast ; but luckily some products are stabilising and
therefore we can give few lines out ;
that is some 5K's/month of single side assy 1.6 FR4 , 100% reflow boards
4x8" ; 150 parts (up to 20mil); panelising flexible ;
on key ; = components specified .
I'd appreciate few good, bad, and ugly stories on major assembly houses if
you could please recommend ; flag or discourage any particular names on line
off line whatever you consider deserved .
We're multinational (Sydney & San Diego based) ; no borders; preferences;
discriminations; the ambiguous 9002 would help ; FDA or MIL (validated
process) experience would do too .
Also ; any fast (week) prototype house ; on key to specs .
Thanks a lot for help .
Paul Klasek
http://www.resmed.com
PS
True that Singaporean Degussa closed down ?
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|