Dear all we grow bit too fast ; but luckily some products are stabilising and therefore we can give few lines out ; that is some 5K's/month of single side assy 1.6 FR4 , 100% reflow boards 4x8" ; 150 parts (up to 20mil); panelising flexible ; on key ; = components specified . I'd appreciate few good, bad, and ugly stories on major assembly houses if you could please recommend ; flag or discourage any particular names on line off line whatever you consider deserved . We're multinational (Sydney & San Diego based) ; no borders; preferences; discriminations; the ambiguous 9002 would help ; FDA or MIL (validated process) experience would do too . Also ; any fast (week) prototype house ; on key to specs . Thanks a lot for help . Paul Klasek http://www.resmed.com PS True that Singaporean Degussa closed down ? ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################