Ken: You may want to condider an inline on demand water heater/flash
heater. At the low volumes you are using it should work well. We have used these
for various applications using DI water, typically 6 megohm or less. Chromalox
Inc. makes a nice unit out of SS that is resistant to corrosive liquids.

                                        Regards
                                                Michael Barmuta
                                                Staff Engineer
                                                Fluke Corp.
                                                Everett Wa.
                                                425-356-6076



On Tue, 23 Mar 1999 14:37:24 -0800 Kenny Bloomquist wrote:

> From: Kenny Bloomquist <[log in to unmask]>
> Date: Tue, 23 Mar 1999 14:37:24 -0800
> Subject: [TN] DI Water Heater
> To: [log in to unmask]
>
> This is a little off subject except we use hot DI for board cleaning.
>
> We are looking for a small, fast recovery DI water heater. It needs to keep
> about 20 gallons per hour usage at least 140F to 160F. Everything we've
> seen is very expensive, espically when we say the magic word, DI.
>
> Any leads would be greatly appreciated.
>
>
> Ken Bloomquist
> Sr. Principal Process Engineer
> PRIMEX Aerospace Company
> P.O. Box 97009
> Redmond, WA 98073-9709
> http://www.primextech.com
>
> Ph:   425-885-5000
> FAX: 425-882-5786
> [log in to unmask]
>
> Northcon/99, Board Member
> http://www.northcon.org
>
> Electronics Manufacturers Association (EMA), Vice President
> http://www.ema-wa.org
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################