Ken: You may want to condider an inline on demand water heater/flash heater. At the low volumes you are using it should work well. We have used these for various applications using DI water, typically 6 megohm or less. Chromalox Inc. makes a nice unit out of SS that is resistant to corrosive liquids. Regards Michael Barmuta Staff Engineer Fluke Corp. Everett Wa. 425-356-6076 On Tue, 23 Mar 1999 14:37:24 -0800 Kenny Bloomquist wrote: > From: Kenny Bloomquist <[log in to unmask]> > Date: Tue, 23 Mar 1999 14:37:24 -0800 > Subject: [TN] DI Water Heater > To: [log in to unmask] > > This is a little off subject except we use hot DI for board cleaning. > > We are looking for a small, fast recovery DI water heater. It needs to keep > about 20 gallons per hour usage at least 140F to 160F. Everything we've > seen is very expensive, espically when we say the magic word, DI. > > Any leads would be greatly appreciated. > > > Ken Bloomquist > Sr. Principal Process Engineer > PRIMEX Aerospace Company > P.O. Box 97009 > Redmond, WA 98073-9709 > http://www.primextech.com > > Ph: 425-885-5000 > FAX: 425-882-5786 > [log in to unmask] > > Northcon/99, Board Member > http://www.northcon.org > > Electronics Manufacturers Association (EMA), Vice President > http://www.ema-wa.org > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. > For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 > ################################################################ > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################