LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

February 1999

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET February 1999

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	Re: Breakaways removing mask and damaging boards
From:	Armando Melara <[log in to unmask]>
Reply To:	TechNet E-Mail Forum.
Date:	Tue, 23 Feb 1999 08:22:51 -0800
Content-Type:	text/plain
Parts/Attachments:	text/plain (46 lines)

Check into the sharpness of the tool you are using to help the breakaway
become cut off.  Otherwise, check with your boardhouse as to what to do to
ensure that the webbing or the thin channel between the breakaway and the
PCB breaks off without inflicting damage.

At 04:04 PM 2/22/99 -0800, you wrote:
>Tech world,
>Got a problem with removing breakaway tabs. When we remove them, the
>masking is peeling off with the breakaway and some times it runs into
>the traces. I started to blame the assemblers, I thought they were being
>to ruff but when it came time for me to remove the tabs the same thing
>happen to me. Has anyone ran into this problem and if so what is the
>root cause. Any help would be appreciated.
>
>Thanks
>Angie Marques
>Quadrus
>408-918-5045
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2

LISTSERV.IPC.ORG