Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 3 Nov 1998 08:06:13 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Oops...my Tech's just corrected me...we have been running all SOIC's now at full
speed, and we have a 5.0mm nozzle for the large-16-pin-SOIC. The vacuum
generated in the newer machines is excellent! It is impressive to watch those
DIP's placed that fast!
______________________________ Forward Header __________________________________
Subject: [TN] mounting SOIC using Chipshooter
Author: Jeff Hempton at Carrier-HUN-CED1
Date: 11/3/98 7:55 AM
Marc,
For SMD dip packages, we are using our FUJI CP-642 for mounting SMD
SOIC and Large-SOIC packages very effectively using a 3.7mm nozzle,
24mm FUJI feeders. We run full speed for 8-pin, 90% speed for 14 &
16-pin SOIC, and 85% speed for Large-16-pin-SOIC. Works GREAT! This
also gives us more latitude for line balancing with the flexible
placer. Good Luck.
United Technology Electronic Controls
Jeff L. Hempton, Sr. SMD Engineer
E-mail: [log in to unmask]
______________________________ Forward Header __________________________________
Subject: [TN] mounting SOIC using Chipshooter
Author: "Marc O. Bituagan" <[log in to unmask]> at Internet
Date: 11/3/98 1:48 PM
To anyone who can help,
We are contemplating on mounting a 14 pin DIP(4.3mm x 5.1mm, 0.35
mm pitch) using our FUJI CP6 chipshooter but have no experience
doing so. We have successfully mounted 8 pin IC's in the past but
not quite sure what to expect this time out. Anyone out there with
experience or knowledge with the set-up, your two-cents on the matter
is highly appreciated.
Thanks.
Marc O. Bituagan
Industrial Engineer
Electronic Assemblies, Inc.
Manila, Philippines
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|