Chris: Since LONCO was bought out (about 10 years ago?)I don't believe
Sealbrite exists anymore. Alpha Metals did carry some similar products that were
non activated modified rosins. There was a 300 series that had various % solids
depending on your aplication method also two other products 828 and 2301 that a
different solvent carrier system to allow lower temp drying. The west coast phn#
for Alpha is 949-757-0111.
        If these are not available you could "probably" use a straight R rosin
flow soldering flux.
This is "messy" stuff to work with, if the application is for Cu PCB's I would
suggest you try to get your customer to go with one of the newer generation
OSP's.
                                                Regards
                                                        Michael Barmuta
                                                        Staff Engineer
                                                        Fluke Corp.
                                                        Everett Wa.
                                                        425-356-6076


On Wed, 7 Oct 1998 11:08:51 -0700 Chris Williams wrote:

> From: Chris Williams <[log in to unmask]>
> Date: Wed, 7 Oct 1998 11:08:51 -0700
> Subject: [TN] Sealbrite
> To: [log in to unmask]
>
> Remember Sealbrite?  It's no longer made, but we have a customer that is
> very interested in using it.  Does anyone know of a good alternative or
> replacement?  Thanks in advance.
>
> Chris Williams
> Graphic Products, Inc.
> [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################