You can also look at http://www.joshmadison.com/software. There is a
     tiny program called "Convert" which does virtually any conversion you
     want.


______________________________ Forward Header __________________________________
Subject: Re: [TN] Conversion Program
Author:  Paul Anderson <[log in to unmask]> at SMTPLink-Hadco
Date:    8/25/98 8:30 PM


Hey Dan:

Here's another site that IS freeware.  Has tons of conversion factors of all
kinds.  Even does the math for
you.

http://www.processassociates.com/process/convert/cf_all.htm


Roberts wrote:

> Matthew,
>         Take a look at Conversion Master Calculator, you can find it at:
> http://www.conversionmaster.com/cm_ordr.htm.  I have used it for a couple of
> years and found it pretty helpful.  It isn't freeware but you can get a sixty
> day trial to see how you like it.  Hope it helps.
>
> Dan
>
> ******************************************
> Dan Roberts
> PCB Design
> VeriFone, Inc. an HP Co.
> 3755 Atherton Road
> Rocklin, CA 95765-3701
>
> (916) 630-2555 Direct
> (916) 630-2501 Fax
>
> [log in to unmask] work email
> [log in to unmask] when all else fails
> ******************************************
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################



--
                        Have a Golden Day,

Paul Anderson
[log in to unmask]
http://www.amherst.com/

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################