Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 6 Aug 1998 14:24:57 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have used high temperature cyanacrylates with good success. They are
available from multiple suppliers with 3 second to several minutes until
set and many survive at least 1 bottomside wavesolder cycle. I have also
used hot melts for some top side applications, but it has limited
applications due to processing and melting temperature issues.
You can also use SMD glue and a heat gun.
ARIC PARR
Sr. Manufacturing Engineer
Eaton Corp
1400 S. Livernois
P. O. Box 5020
Rochester Hills, Mi 48308-5020
[log in to unmask]
248 608 7780
Fax: 248 656 2242
-------------
Original Text
From: C=US/A=INTERNET/DDA=ID/pws(a)cygnetuk.demon.co.uk, on 8/6/98 1:35 PM:
To: Aric Parr@01635@Lectron_RH,
EatonWHQ@CorpMail@WHQCleveOH[C=US/A=INTERNET/DDA=ID/TechNet(a)IPC.ORG]
In message
<[log in to unmask]>
[log in to unmask] writes:
> Greetings!
>
> Our assembly floor currently uses a polyurethane molding compound to
> spot bond jumper wires and components to printed circuit boards. It has
> a shelf life of 1 month @ -40 C and a working / pot life of < 30
> minutes. I may be new to the assembly side of this business, but surely
> there has to be a more user friendly material out there! Would anyone
> be so kind as to point me in the right direction and share information
> on what works and what doesn't? You may e-mail me directly.
I wrote an article on the options in the UK magazine _Electronic
Production_,
March 1992. I can fax a copy to you if you send me your fax number, by
e-mail,
off the forum.
Peter
--
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::
Peter Swanson Oxfordshire,
England
INTERTRONICS
[log in to unmask]
http://www.cygnetuk.demon.co.uk
Suppliers of materials and consumables to the electronics & related
industries
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|