TECHNET Archives

July 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
Subject:
From:
Charles Barker <[log in to unmask]>
Date:
Mon, 6 Jul 1998 07:19:56 -0500
Content-type:
multipart/mixed; Boundary="0__=XaxmVVmOARAp6IHXfVdRKvTO34KPY4oOksf5HJFQPSedhJpLIekAyNeP"
X-To:
Bernard Domingo <[log in to unmask]>
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask]
Parts/Attachments:
text/plain (1053 bytes) , text/plain (784 bytes)
Dear Bernard,

Some one on TechNet recently said to check the spray pattern of a fluxer by
attaching old style FAX paper to the bottom of a board and running it thru
the spray. If your flux is alcohol based, that will show you what the
pattern is. You can then adjust, clean, etc. until you have full coverage.

Hope this helps.

Charlie B.




Bernard Domingo <[log in to unmask]> on 07/06/98 02:03:48 PM

Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
      to Bernard Domingo <[log in to unmask]>

To:   [log in to unmask]
cc:    (bcc: Charles Barker/US/I-O INC)
Subject:  [TN] Spray Fluxer




070698

Dear Charles,

Hi!  My name is Bernard P. Domingo, SMT Engineer from EAI
Philippines.  Actually, Jon is my Senior Engineer and he asked me to
provide you the info. you need about our Spray Fluxer.

We are using EFD 780S Spray Valve.  Stationary headed spray fluxer
with compressed dry air as its atomizing air.  We have 2 types of
nozzle.  Round and Fan type.

Our flux is Kester 933-3 no-clean, low solid ( 3%), rosin flux.  The
pre-heat requirement is 80-100


ºC. This flux is alcohol based. Thank you very much for your support. Good day. Bernard ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################

ATOM RSS1 RSS2