Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 7 May 1998 10:55:07 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jo..
It may sound same as 603 res/cap chips, but the
height/thickness of 603 inductor is different (usually twice thick)
and the soldering termination shape is slightly different. So the
suface mount land pattern should be larger than 603 res/cap
chips to provide robust solder joints.
Matthew Park
NII-Norsat International Inc.
>>> JoAnn Amerson <[log in to unmask]>
May 7, 1998 5:30 am >>>
> From: Ian Squires <[log in to unmask]>
> Subject: Re: [TN] 0603 Surface Mount Chip Inductor Land
Dimensions ?
> Hello, I have a question concerning land dimensions
>
> What is the recommended IPC land dimensions for a 0603
Surface Mount Chip
> Inductor.
>
> 1.6mm x 0.8mm x 0.8mm - 0603 chip inductor dimensions
>
> There is no reference to this device in IPC-SM-782 (includes
Ammendment 1
> October 1996).
I'm ging to ask what may be a dumb question..........Why should a
0603 inductor be a different size than an 0603 resistor or cap?
JoAnn L. Amerson
Design Librarian
Red Lion Controls, Inc.
E-mail: [log in to unmask]
Voice: (717) 767-6961 ext 6308
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to
[log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at
[log in to unmask] or 847-509-9700 ext.311
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|