Tim,

For flexible circuit assembly check with Scott Lindblad of Automated
Assembly (612) 469-6556.

Dave Roesler
TRI-C Design, Inc.


----------
> From: Stammely, Tim <[log in to unmask]>
> To: [log in to unmask]
> Subject: [TN] Flexible Circuit Manufacture
> Date: Tuesday, April 14, 1998 10:11 AM
>
> Hello All,
>
> I need help. We have just had a customer of ours ask us to bid a flexible
> circuit job. We haven't done flexible circuits yet, so I need some info
on
> the process. The circuit I'm looking at is a 4-layer
> (Dielectric--Conductive-Conductive--Dielectric) flex board. The substrate
is
> a polyvinyl chloride material and is .015 thick. It appears that the only
> components that need to be added are 2 through hole connectors.  What do
I
> need to watch out for to run this board through my Soltec Wave Solder(If
its
> even possible).The production volumes are fairly high so hand soldering
is
> pretty much out of the question. Any info on flex circuit assembly would
be
> greatly appreciated. Also, does anyone have any experience with running
> surface mount flexible circuits on Zevatech 700 series machines.
>
> thanks
>
> Tim Stammely
> Manufacturing Engineer
> Manufacturing Services & Integration (MSI)
> Manassas, VA
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################