Tim, For flexible circuit assembly check with Scott Lindblad of Automated Assembly (612) 469-6556. Dave Roesler TRI-C Design, Inc. ---------- > From: Stammely, Tim <[log in to unmask]> > To: [log in to unmask] > Subject: [TN] Flexible Circuit Manufacture > Date: Tuesday, April 14, 1998 10:11 AM > > Hello All, > > I need help. We have just had a customer of ours ask us to bid a flexible > circuit job. We haven't done flexible circuits yet, so I need some info on > the process. The circuit I'm looking at is a 4-layer > (Dielectric--Conductive-Conductive--Dielectric) flex board. The substrate is > a polyvinyl chloride material and is .015 thick. It appears that the only > components that need to be added are 2 through hole connectors. What do I > need to watch out for to run this board through my Soltec Wave Solder(If its > even possible).The production volumes are fairly high so hand soldering is > pretty much out of the question. Any info on flex circuit assembly would be > greatly appreciated. Also, does anyone have any experience with running > surface mount flexible circuits on Zevatech 700 series machines. > > thanks > > Tim Stammely > Manufacturing Engineer > Manufacturing Services & Integration (MSI) > Manassas, VA > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. > For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 > ################################################################ > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################