Ditto. I use Pads PowerPCB and must output in D then let CAM350 output
the X gerber files.
George W Uptain, Jr.
Austin Product Center of Schlumberger Oilfield Services
(512)331-3183

> -----Original Message-----
> From: Ralph Garvin [SMTP:[log in to unmask]]
> Sent: Wednesday, March 25, 1998 7:54 PM
> To:   [log in to unmask]
> Subject:      Re: [DC] PADS Gerber Output Question
>
> Steve,
>    The PADS 274x output is terrible. We have many problems with it and
> try it first with our viewer[CAM350] before sending it to the pcb
> production houses.[They also have had many problems with the files].
> Just make sure of your 274D format setting to get the correct number
> of
> digits.
>     You would think that something as simple as the gerber output
> module
> would work correctly!!!!!
>
>          Good Luck,
>
>             Ralph Garvin
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
> LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################