DESIGNERCOUNCIL Archives

March 1998

DesignerCouncil@IPC.ORG
Options:

Subject

From

Date Sorted by Date, Most Recent First
Re: FR4 Relative Permittivity
McGlaughlin, Jeffrey A
Tue, 31 Mar 1998 13:14:01 -0500
Re: Land Patterns for Mentor Graphics
Wolfgang Schenke
Tue, 31 Mar 1998 08:21:54 -0800
Land Patterns for Mentor Graphics
Hurst, Joe
Tue, 31 Mar 1998 09:41:00 -0500
Re: FR4 RELATIVE PERMITTIVITY
<>
Tue, 31 Mar 1998 08:22:01 -0600
Re: FR4 Relative Permittivity
Leonard Toohey
Tue, 31 Mar 1998 08:19:18 -0600
FR4 Relative Permittivity
Hurst, Joe
Tue, 31 Mar 1998 08:56:00 -0500
Gen: SMTA/IMAPS EXPO '98 Dallas
Keith Larson
Mon, 30 Mar 1998 20:48:40 -0600
RESCHEDULED N.I.I.P.C. Des. Council MTG. (MICROVIAS)
<>
Mon, 30 Mar 1998 14:16:39 -0600
Re: Flex Knowledge needed
<>
Mon, 30 Mar 1998 11:54:04 -0600
Re: Flex Knowledge needed
AMC-CAL-DVP Richard Hatano
Mon, 30 Mar 1998 09:12:00 -0800
Re: Flex Knowledge needed
Scott Decker
Mon, 30 Mar 1998 07:58:51 -0800
Re: Flex Knowledge needed
Kimmey, Frank
Mon, 30 Mar 1998 07:50:11 -0800
Re: Flex Knowledge needed
Greg Bordash
Mon, 30 Mar 1998 10:48:27 -0500
Flex Knowledge needed
BKDoughty1
Mon, 30 Mar 1998 10:25:22 EST
PWB Survey Attachment
Charles Barker
Mon, 30 Mar 1998 09:06:17 -0600
Re: Pwb Shop Survey
Charles Barker
Mon, 30 Mar 1998 08:50:23 -0600
Re: Pwb Shop Survey
Charles Barker
Mon, 30 Mar 1998 08:48:40 -0600
Pwb Shop Survey
Vanech, Bob
Mon, 30 Mar 1998 06:23:00 PST
Re: Pwb Shop Survey
Joe Reichert
Mon, 30 Mar 1998 09:01:15 -0500
Signal Planes
Jay Bitanga
Sat, 28 Mar 1998 01:11:11 +0000
Re: VERIBEST TO AUTOCAD EXPORT
Olson, Jack C
Fri, 27 Mar 1998 11:38:08 -0800
Needed suggestions - Thanks!!!!
JoAnn Amerson
Fri, 27 Mar 1998 14:42:18 +0000
???IS THE FOOT PRINT FOR TQFP THE SAME AS PQFP??????
Tom Paiva
Fri, 27 Mar 1998 09:41:02 -0000
Re: RE-INFORCING MY QUESTION! -Reply
Clint E Cote
Thu, 26 Mar 1998 19:26:22 -0500
Re[2]: [DC] Re[2]: [DC] Need suggestions
<>
Thu, 26 Mar 1998 16:34:12 -0500
Corona testing
<>
Thu, 26 Mar 1998 17:03:14 EDT
RE-INFORCING MY QUESTION! -Reply
Larry Campbell
Thu, 26 Mar 1998 15:50:43 -0500
PADS Gerber Output Question
Greg Bordash
Thu, 26 Mar 1998 15:40:09 -0500
Re[2]: [DC] Need suggestions
<>
Thu, 26 Mar 1998 15:26:46 -0500
Re: PADS Gerber Output Question
GianFranco Angiolini
Thu, 26 Mar 1998 21:25:00 +0100
Re: Re[2]: [DC] Need suggestions
George Uptain
Thu, 26 Mar 1998 13:36:27 -0600
Re: Need suggestions
Joy, Stephen C
Thu, 26 Mar 1998 11:30:00 -0800
Re: Need suggestions
AMC-CAL-DVP Richard Hatano
Thu, 26 Mar 1998 10:21:00 -0800
Re: Need suggestions
Scott Shepard
Thu, 26 Mar 1998 10:08:00 -0800
Re: RE-INFORCING MY QUESTION!
Stew Benedict
Thu, 26 Mar 1998 09:42:30 -0800
RE-INFORCING MY QUESTION!
Craig M. Lang/AEC
Thu, 26 Mar 1998 09:51:55 -0500
Re: Need suggestions
Neil Diamond
Thu, 26 Mar 1998 07:47:42 -0600
Re: Font styles in Gerber Data?
McGlaughlin, Jeffrey A
Thu, 26 Mar 1998 08:37:22 -0500
Re: PADS Gerber Output Question
Greg Bordash
Thu, 26 Mar 1998 08:33:53 -0500
Re: PADS Gerber Output Question
George Uptain
Thu, 26 Mar 1998 06:19:44 -0600
Need suggestions
JoAnn Amerson
Thu, 26 Mar 1998 08:12:55 +0000
Re: PADS Gerber Output Question
Ralph Garvin
Wed, 25 Mar 1998 19:54:01 -0600
Font styles in Gerber Data?
Craig M. Lang/AEC
Wed, 25 Mar 1998 14:36:24 -0500
Re: Press-fit connectors
Joe Cachina
Wed, 25 Mar 1998 08:19:45 -0800
Re: Font styles in Gerber Data?
Steve Ray
Wed, 25 Mar 1998 16:08:38 -0000
Re: Press-fit connectors
Walton, Jim
Wed, 25 Mar 1998 07:12:22 -0500
CDX to Veribest Hardware Items & Metric
Wolfe, Robert
Tue, 24 Mar 1998 17:25:31 -0500
Re: Press-fit connectors
Jay DeKing (EMA)
Tue, 24 Mar 1998 17:20:29 -0500
Re: Press-fit connectors
Karl J. Bates
Tue, 24 Mar 1998 15:58:09 -0600
Press-fit connectors
Walton, Jim
Tue, 24 Mar 1998 16:24:15 -0500
SOLUTION TO VERIBEST TO AUTOCAD EXPORT
Robert Butterworth
Tue, 24 Mar 1998 14:47:19 -0600
Employment
Richard Auerbach
Tue, 24 Mar 1998 11:58:05 -0600
Re: PADS Gerber Output Question
Garry Hammond
Tue, 24 Mar 1998 09:27:11 -0500
PADS Gerber Output reply
<>
Mon, 23 Mar 1998 15:40:42 -0700
PADS Gerber Output Question
Steve Collins
Mon, 23 Mar 1998 15:11:05 -0700
AUTOCAD FONT COMPILATION
Robert Butterworth
Mon, 23 Mar 1998 15:02:38 -0600
Electronic Devices - Age Limits
Yves Trudell
Mon, 23 Mar 1998 11:37:42 -0500
Re: Soldermask Adhesion
Clint Cote
Mon, 23 Mar 1998 08:29:57 -0500
IPCchat session announcement
<>
Sun, 22 Mar 1998 20:04:09 -0800
Re: Soldermask Adhesion, Bow and Twist
dccircut
Sun, 22 Mar 1998 21:59:05 -0500
subscribe
<>
Sun, 22 Mar 1998 17:26:08 -0800
Re: looking for a partner (YIKES!)
Edward J Popielarski
Fri, 20 Mar 1998 17:05:50 -0600
Soldermask Adhesion, Bow and Twist
mdsn500
Fri, 20 Mar 1998 13:23:36 -0800
ADMIN NOTICE: [DC] looking for a partner
Jack Crawford
Fri, 20 Mar 1998 14:11:54 -0600
Re: Your request to sign off the DesignerCouncil list
Jim Chen
Fri, 20 Mar 1998 14:07:05 -0500
Re: looking for a partner
Ray Humphrey
Fri, 20 Mar 1998 11:04:49 -0800
Re: looking for a partner
Eric Bonatti
Fri, 20 Mar 1998 13:09:15 -0500
Re: looking for a partner
Edward J Popielarski
Fri, 20 Mar 1998 11:10:51 -0600
Re: subscribing
Jack Crawford
Fri, 20 Mar 1998 11:05:06 -0600
Re: Current charts
Lisa Williams
Fri, 20 Mar 1998 09:14:35 -0600
Re: Current charts
Cormac J. Cunningham
Fri, 20 Mar 1998 07:42:05 -0500
Re: Current charts
Gary Ferrari
Thu, 19 Mar 1998 21:49:31 -0600
subscribing
Jose Martinez
Thu, 19 Mar 1998 20:15:33 -0500
Greater Boston IPCDC Chapter meeting 25-Mar 6pm
Jeff Seeger
Thu, 19 Mar 1998 19:14:14 -0500
Re: PCB assy defect reporting criteria
Clint Cote
Thu, 19 Mar 1998 14:46:40 -0500
Re: PCB assy defect reporting criteria
Jack Crawford
Thu, 19 Mar 1998 13:39:55 -0600
PCB assy defect reporting criteria - Reply
Ted Nathan
Thu, 19 Mar 1998 11:49:13 -0700
[TN] PCB assy defect reporting criteria
Steve Schrader
Thu, 19 Mar 1998 13:48:00 -0500
Re: PCB assy defect reporting criteria
Doug Brooks
Thu, 19 Mar 1998 10:23:50 -0800
Current charts
Scott Shepard
Thu, 19 Mar 1998 10:20:00 -0800
PCB assy defect reporting criteria
RSIMathis
Thu, 19 Mar 1998 13:09:15 EST
looking for a partner
Maquelsa
Thu, 19 Mar 1998 11:02:59 -0600
IPCchat session announcement
<>
Wed, 18 Mar 1998 17:44:29 -0800
Job Posting
Tom Colby
Wed, 18 Mar 1998 17:24:17 -0500
Re: Drill Drawing
Ray Humphrey
Wed, 18 Mar 1998 10:33:20 -0800
Drill Drawing
Clint Cote
Wed, 18 Mar 1998 12:36:37 -0500
Re: Drill Drawing
JoAnn Amerson
Wed, 18 Mar 1998 12:53:43 +0000
Re: Insulation Displacement Contacts
Doug McKean
Tue, 17 Mar 1998 09:10:05 -0500
<No subject>
ras
Tue, 17 Mar 1998 11:05:28 +0000
Job Posting - CAD/CAM Designer and Test Engineer
Dan Brandler
Mon, 16 Mar 1998 11:31:32 -0800
Re: DES:"tuning" etch pattern
Chris Stack
Mon, 16 Mar 1998 14:07:09 -0500
pwb board materials
Weick, Robert
Sun, 15 Mar 1998 08:18:19 -0500
Re: Capacitance Formulas in IPC 317, resend
Gary Shoemaker
Sat, 14 Mar 1998 17:44:44 -0500
Re: DES:"tuning" etch pattern
McGlaughlin, Jeffrey A
Fri, 13 Mar 1998 13:37:59 -0500
DES:"tuning" etch pattern
Mitch Morey
Fri, 13 Mar 1998 10:17:44 -0800
Re: Capacitance Formulas in IPC 317, resend
Doug McKean
Fri, 13 Mar 1998 12:17:30 -0500
SIGNOFF
Jyrki Still
Fri, 13 Mar 1998 11:38:37 +0000
Re: DES:"tuning" etch pattern
Steve Ray
Fri, 13 Mar 1998 11:13:47 -0000
IC packages
Stella Yap
Fri, 13 Mar 1998 14:59:10 +0800
Capacitance Formulas in IPC 317, resend
Doug Brooks
Thu, 12 Mar 1998 10:53:55 -0800
Capacitance Formulas in IPC 317
Doug Brooks
Thu, 12 Mar 1998 10:07:25 -0800
Re: Learning how to design
<>
Thu, 12 Mar 1998 11:39:03 -0600
Re: U.S.Robotics WinModem: HELP!!
Taylor, Chris H.
Tue, 10 Mar 1998 08:19:41 -0500
Re: To Prevent Arcing
Scott Buscomb
Mon, 9 Mar 1998 10:33:32 -0800
Learning how to design
Khaled Hassan Fouad
Mon, 9 Mar 1998 20:25:49 +0200
Re: To Prevent Arcing
Taylor, Chris H.
Mon, 9 Mar 1998 10:36:48 -0500
To Prevent Arcing
IDKitty6
Mon, 9 Mar 1998 10:11:04 EST
Present CAD systmes - Reply
Ted Nathan
Mon, 9 Mar 1998 08:07:51 -0700
Re: footprint
GaryF40
Sun, 8 Mar 1998 22:45:25 EST
footprint
Chris Johnston
Mon, 9 Mar 1998 07:46:04 +1000
IPC, Orange County, 1998.03.10 Meeting - Reminder
Kevin L Seaman
Fri, 6 Mar 1998 13:31:13 -0800
Re: Present CAD systems plus a little smile
JoAnn Amerson
Fri, 6 Mar 1998 08:12:36 +0000
Re: 1000V Test
Olson, Jack C
Thu, 5 Mar 1998 15:05:27 -0800
Re: 1000V Test
Doug McKean
Thu, 5 Mar 1998 17:59:49 -0500
Re: dielectric constant
Olson, Jack C
Thu, 5 Mar 1998 13:47:01 -0800
1000V Test
IDKitty6
Thu, 5 Mar 1998 16:34:47 EST
Re: Present CAD systmes
Clint Cote
Thu, 5 Mar 1998 14:34:44 -0500
Re: Present CAD systems
Pat Paulson
Thu, 5 Mar 1998 13:16:20 -0600
Re: Present CAD systems
Tom Hybiske
Thu, 5 Mar 1998 12:40:44 -0600
DFT in PADS
Merlin Rick
Thu, 5 Mar 1998 10:26:55 -0800
Re: Present CAD systmes
Merlin Rick
Thu, 5 Mar 1998 09:36:01 -0800
Present CAD systmes
Charles Barker
Thu, 5 Mar 1998 11:28:40 -0600
Re: Present CAD systmes
JoAnn Amerson
Thu, 5 Mar 1998 12:51:12 +0000
Job Posting - CAD designer
<>
Wed, 4 Mar 1998 15:43:37 EST
job posting
<>
Wed, 4 Mar 1998 14:48:36 EST
Simulation comments
Fred Dehkordi
Wed, 4 Mar 1998 09:55:37 -0600
Re: dielectric constant
Louis Dallara
Wed, 4 Mar 1998 06:56:28 -0800
Re: dielectric constant
Taylor, Chris H.
Wed, 4 Mar 1998 08:41:23 -0500
Re: dielectric constant
Mitch Morey
Tue, 3 Mar 1998 10:28:11 -0800
dielectric constant
Olson, Jack C
Tue, 3 Mar 1998 09:21:15 -0800
Re: Viewlogic 7.4 bug
Jay DeKing (EMA)
Tue, 3 Mar 1998 11:13:59 -0500
Re: Viewlogic 7.4 bug
<>
Tue, 3 Mar 1998 09:37:24 -0600
Re: ViewLogic 7.4 bug
Taylor, Chris H.
Tue, 3 Mar 1998 10:21:50 -0500
Re: Viewlogic 7.4 bug
Leonard Toohey
Tue, 3 Mar 1998 09:13:01 -0600
Re: Viewlogic 7.4 bug
Taylor, Chris H.
Tue, 3 Mar 1998 09:57:37 -0500
Re: database archive question
Tom Kropski
Tue, 3 Mar 1998 07:49:29 -0500
Need DO file assistance
Steve Sarasin
Tue, 3 Mar 1998 07:36:00 -0500
database archive question
Wolfe, Robert
Mon, 2 Mar 1998 12:42:26 -0500
N.I.I.P.C. Des. Council MTG. (MICROVIAS)
<>
Mon, 2 Mar 1998 10:43:34 -0600
Re: database archive question
Joe Reichert
Mon, 2 Mar 1998 10:46:47 -0500
database archive question
Jerome Schwartz x5474
Mon, 2 Mar 1998 10:35:57 -0500
chip on flex (COF)
[log in to unmask]
Mon, 2 Mar 1998 11:04:21 +0000
subscribe
Sten D. Carlsen
Mon, 2 Mar 1998 10:02:23 +0100

ATOM RSS1 RSS2