Clint,
You may like to try DrillToGerber, a utility to convert drill files to gerber format. It has a tool table in which you assign D-Codes to your drill sizes. Then, you can plot drill drawings using whatever shapes you have assigned to the D-Codes. It is available from the software download link off of DynaCad Design Services web page, http://www.aracnet.com/~dynacad. Some assitional features are:
1. Convert Excellon, GE550, and Sieb & Meyer NC drill files to gerber format.
A. Supports the following input format options:
a. Zero Suppression (Leading, Trailing, None)
b. Mode (Absolute, Relative)
c. Units (English, Metric)
B. Supports the following output format options:
a. Type (RS-274d, RS-274x, Fire 9xxx)
2. Visually check/compare drill data.
3. Create a composit with signal layers to generate "TRUE" donuts.
4. Easily create step-and-repeat images of drill data.
5. Manipulate/edit drill data as easily as Gerber data.
DrillToGerber has an easy-to-use graphical user interface.
Ray Humphrey <[log in to unmask]>
DynaCad Design Services
Phone (503)642-4040 * FAX (503)591-8767
http://www.aracnet.com/~dynacad
----------
From: Clint Cote[SMTP:[log in to unmask]]
Sent: Wednesday, March 18, 1998 9:36 AM
To: [log in to unmask]
Subject: [DC] Drill Drawing
I have a little problem, perhaps someone could help to steer me in the right
direction. I have a bunch of old designs (Gerber and Excellon Drill files) that
I need to create a drill drawing for. I need to show the quantity, size,
plating requirements and a unique symbol or letter for each occurrence (a
typical drill drawing without the dimension). The only files I have to create
this from is the Excellon drill file. I have looked at CAM350 and I can reverse
engineer a drill drawing with that but it takes about 5-10 minutes and I would
need to train others how to do it. Besides the fact that buying CAM350 to
create drill drawings is like buying a tractor to make a flower garden. Is
there software that can do this and only this?
Thanks for any help!
=============================================================
Clint Cote GE Fanuc Automation
PCB Designer PO Box 8106, Mail stop D-40
Phone: (804) 978-5946 Charlottesville, VA 22906
e-mail: [log in to unmask]
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|