Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 17 Feb 1998 16:24:27 -0600 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
We are looking to purchase a used, operational forced
air convection oven. The oven is to used in an application
which has a larger process window than a SMT
placement/reflow process. Below is the general minimum
requirements for the oven:
- mesh conveyor, (edge conveyors not required)
- 4 zones, 2 preheat, 1 reflow, 1 cooling
- no need for computer control (rheostat controlled zone
temperatures, fan speeds and conveyor speeds are fine)
- minimum 3" height clearance along entire length
Therefore, what I am really looking for is someone who has
a older convection oven, that has since been replaced with
one with edge conveyors, that was purchased before edge
conveyors were a necessity that has been sitting in
someone's warehouse for eons and you cannot think of a thing
to do with it.
P.S.
Has anyone had any experience on using pass-thru convection
ovens for shrinking heat-shrink tubing over cable
assemblies.
Any help will be most appreciated.
Thanks,.......Brian Husnik
----------------------
Brian Husnik
Production Manager
SED Systems Inc.
Saskatoon, Saskatchewan,
Canada, S7K 3P7
Phone: (306) 933-1608
E-mail: [log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|