Hi Steve - take a look at ANSIJ-STD-003 Solderability for PWBs. You may be
able to conduct your own solderability tests or there are several labs
(check the IPC services directory) that can help you out.
Dave Hillman
Rockwell Collins
[log in to unmask][log in to unmask] on 01/19/98 05:49:48 PM
Please respond to [log in to unmask]; Please respond to
[log in to unmask]
To: [log in to unmask]
cc: (bcc: David D Hillman/CedarRapids/Collins/Rockwell)
Subject: [TN] PCB Solderability Analysis
Hello Technetters,
I have been experiencing considerable defects across the wave solder with
one particular vendors PCB's. My question is what guidelines are most
commonly used to perform a solderability analysis and can anyone suggest a
good lab for having this done.
Thanks in advance,
Steve Tucker
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
##############################################################