Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 22 Dec 1997 14:15:48 EST |
X-cc: |
|
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Lance
Most shops that I visit, and the ones that I have managed, directly download the image and drill files to the inspector from CAM to use as referance ( sometimes called CAD download) for reference inspection purposes. Set up for inmspection is generally accomplished on the inspector, or, off line on an E/R station.
Off line set up and then storage of the inspection files on the inspector
provides the advantage of maintaining inspector productivity while setting up
the jobs.
In the very near future, I expect to see an ability to set up, or program the
inspection files, from CAM. That is, the CAM operator will be able to select
the edit out areas, all reference features, select material type and copper
surface preparation as well as all other info now determined by the AOI operator
during their set up procedure. True CAAM set up as well as reference.
Dick Desrosiers
AOI International
508-937-5400 ext 212
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|