Subject: | |
From: | |
Date: | Thu, 24 Jul 1997 11:25:16 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
From: [log in to unmask]
Path:
plnews!super.zippo.com!nntp.kreonet.re.kr!newsfeed.dacom.co.kr!infeed1
.internetmci.com!newsfeed.internetmci.com!supernews.com!Supernews69!no
t-for-mail From: mjsrnec <[log in to unmask]>
Newsgroups: alt.electronics.manufacture.circuitboard Subject: Slide
Lines or Conveyors?? Date: Wed, 23 Jul 1997 12:16:18 -0600
Organization: All USENET -- http://www.Supernews.com Lines: 15
Message-ID: <[log in to unmask]>
NNTP-Posting-Host: [log in to unmask] Mime-Version: 1.0 Content-Type:
text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer:
Mozilla 4.01 [en] (WinNT; I) X-Priority: 3 (Normal) Xref: plnews
alt.electronics.manufacture.circuitboard:1511
We have a medium volume ( 500-1000 board/day) high-mix (15-20
different styles/day) PCB assembly line that we are looking to
upgrade.
Trying to decide between "Slide" rail style (non-motorized) or
edge-belt/roller configurations. Both for assembly stations and for
wave solder machine loaders. We run fairly heavy (3-8 lbs each)
assemblies, most without pallets.
Any experiences would be appreciated. Equipment Mfgrs, thru-put
increase info etc . . .
Thanks for the help!
NOTE : For direct replies remove the SPAM and BE_GONE from the reply
address.
................................................................................
Thank you,
Keith Birchfield
================================================================================
Management Information Systems
WAYTEC ELECTRONICS CORP.
Voice 804-237-6391
Fax 804-237-1324
Email [log in to unmask]
URL http://www.waytec.com
FTP ftp.waytec.com
================================================================================
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|