Subject: | |
From: | |
Date: | Thu, 17 Jul 1997 11:42:18 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
[log in to unmask] wrote:
<snip>
> I would also highly recommend a "via plugger artwork" be
> supplied in the Gerber package. This clearly defines what
> vias are to be plugged and is easily created by picking the
> via pads to be plugged from the outer layer artwork.
> Sometimes if a via is used as a test point, then this via
> should not be plugged.
<snip>
I've often thought we should be supplying this artwork, in
the interest of completeness. Question is, what size should
this image carry? The finished hole size? Same as outer
layer pad? Not a concern, it'll get tweaked in CAM (just
like not getting the image at all, eh)?
Can there be a concencus? If so, we'll try to implement it.
Regards,
--
Jeff Seeger Applied CAD Knowledge Inc
Chief Technical Officer Tyngsboro, MA 01879
jseeger "at" appliedcad "dot" com 508 649 9800
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|