Subject: | |
From: | |
Date: | Wed, 09 Jul 1997 18:15:20 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Haalllooo, Technet!
I'm (probably not alone in) facing pressures to setup non-
symmetrical stackups, to accomodate the growing number of
mixed 5v and 3.3v boards.
I fully understand the unkind things that can happen when
we're not distributing the negative layers well, but "how
bad is bad?" In the ~8x8" .062 world, is flexibility vis
non-functional-copper (add/remove) enough to be reasonably
certain of flat product?
Would adding extra relief pads on the offending plane layer
be beneficial? How about a positive-image mesh?
Does this become more critical with increasing overall size,
as I'd expect?
Am I correct to worry about this, considering 1000s as a
product life?
Thanks in advance,
--
Jeff Seeger Applied CAD Knowledge Inc
Chief Technical Officer Tyngsboro, MA 01879
jseeger "at" appliedcad "dot" com 508 649 9800
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|