 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wtzfE-000BkWC; Thu, 31 Jul 97 13:09 CDT |
| Old-Return-Path: |
|
| From [log in to unmask] Thu Jul 31 14: |
36:35 1997 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Cc: |
|
| Message-Id: |
<H000132a0df8d18e@MHS> |
| Resent-Message-ID: |
<"7RypW1.0.cMN.NJDup"@ipc> |
| Subject: |
|
| From: |
|
| In-Reply-To: |
<"19970731155537.AAA19772(a)(091)206.61.194.161(093)*"@MHS> |
| X-Openmail-Hops: |
1 |
| Date: |
Thu, 31 Jul 97 11:19:57 -0700 |
| >From willli Thu Jul 31 13: |
09:46 1997 |
| Parts/Attachments: |
|
|
Item Subject: HPGL2 conversion software
Erik,
Check out Imagenation by Spicer Corp. at www.spicer.com. It comes in
versions for most platforms and can read most any format inc. HPGL/2.
In comes in a variety of flavors from just read only to full edit.
Regards,
Denis Mori
______________________________ Reply Separator _________________________________
Subject: HPGL2 conversion software
Author: Non-HP-ebodell ([log in to unmask]) at HP-Roseville,shargw3
Date: 7/31/97 10:52 AM
Hello Technetters,
We are seeing an increasing amount of graphics files
(fabrication prints) in HPGL2 format. Does anyone
know of any software that may be used to convert and
view HPGL2?
Thank you,
Erik Bodell
Compeq International, Salt Lake City, Utah
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
