Subject: | |
From: | |
Date: | Thu, 8 May 1997 12:24:16 +0300 (IDT) |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi technetters !
We intend to replace our existing deburr machine . We are manufacturing
boards with 12 , 10 , 8 mills vias . Today we are rinsing this kind of
boards off line . Some manufacturers of the deburring equipment are
proposing ultrasonic floaded module followed by very high pressure rinse .
Someone gave recommendation to use 5 micron diameter glass balls for high
pressure rinse . We will appreciate all comments on this subject ,
especially those based on field experience , regarding deburr and rinse of
small holes ..
Edward Szpruch
Eltek Ltd - Israel
Tel 972 3 9395050
Fax 972 3 9309581
E-mail : [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|