Hi technetters !
We intend to replace our existing deburr machine . We are manufacturing
boards with 12 , 10 , 8 mills vias . Today we are rinsing this kind of
boards off line . Some manufacturers of the deburring equipment are
proposing ultrasonic floaded module followed by very high pressure rinse .
Someone gave recommendation to use 5 micron diameter glass balls for high
pressure rinse .  We  will appreciate all comments on this subject ,
especially those based on field experience ,  regarding deburr and rinse of
small holes .. 
Edward Szpruch
Eltek Ltd - Israel
Tel  972 3 9395050
Fax 972 3 9309581
E-mail :  [log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************